Introduzzjoni
This manual provides essential instructions for the safe operation, installation, maintenance, and troubleshooting of your Farberware FW-WD211 Countertop Hot and Cold Water Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.
The Farberware FW-WD211 is a compact, top-loading water dispenser designed for convenience in homes or offices with limited space. It provides both instant hot and cold water, featuring an energy-saving thermoelectric heating and cooling system and a child safety lock for hot water dispensing.
Istruzzjonijiet Importanti dwar is-Sigurtà
To reduce the risk of injury or property damage, basic safety precautions should always be followed when using electrical appliances. Read all instructions before using this appliance.
- Always plug the dispenser into a grounded electrical outlet.
- Tħaddimx id-dispenser jekk il-korda tal-enerġija tkun bil-ħsara.
- Żomm id-dispenser 'il bogħod mix-xemx diretta u minn sorsi ta' sħana.
- Żgura ventilazzjoni xierqa madwar l-unità.
- Tgħaddasx id-dispenser, il-korda, jew il-plagg fl-ilma jew f'likwidi oħra.
- Supervise children when they are near the dispenser, especially when dispensing hot water. The hot water faucet has a child safety lock.
- Aqla’ d-dispenser mill-plagg qabel ma tnaddaf jew tagħmel xi manutenzjoni.
- Dan l-apparat huwa maħsub għal applikazzjonijiet domestiċi u simili biss.
Kontenut tal-Pakkett
Meta tiftaħ il-pakkett, jekk jogħġbok kun żgur li l-oġġetti kollha huma preżenti u bla ħsara:
- Farberware FW-WD211 Water Dispenser Unit
- Drip Tray u Grid
- Manwal għall-Utent (dan id-dokument)
Note: A 3 or 5-gallon water bottle is not included and must be purchased separately.
Setup
- Spakkjar: Carefully remove the dispenser from its packaging. Place it upright on a flat, stable, and level surface.
- Pjazzament: Position the dispenser in a cool, dry place, away from direct sunlight and at least 10 cm (4 inches) from a wall to allow for proper ventilation. Ensure it is on a countertop or sturdy surface capable of supporting the unit's weight plus a full water bottle.
- Installa t-Trej tat-Tqattar: Slide the drip tray and grid into place at the base of the dispensing area.
- Installazzjoni ta' Flixkun tal-Ilma:
- Naddaf l-għonq ta' flixkun tal-ilma ġdid ta' 3 jew 5 galluni.
- Neħħi l-għatu protettiv mill-flixkun tal-ilma.
- Carefully invert the water bottle and place it firmly onto the water dispenser's bottle support. Ensure it is seated correctly to prevent leaks.
- Fwawar Inizjali: Before plugging in the unit, dispense at least 1 liter (approximately 4 cups) of water from both the hot and cold faucets to ensure the internal tanks are filled and to flush out any air. This prevents dry heating of the hot tank.
- Konnessjoni tal-Enerġija: Ipplaggja l-korda tal-enerġija f'sokit elettriku ta' 120V AC ertjat.
Image: The Farberware FW-WD211 water dispenser with a 5-gallon water bottle in place, ready for use. This illustrates the top-loading design.
Istruzzjonijiet Operattivi
Once the dispenser is set up and plugged in, allow approximately 15-30 minutes for the water to reach optimal hot and cold temperatures.
Immaġni: Quddiem view of the dispenser, highlighting the "HOT" and "COLD" indicator lights and the red (hot) and blue (cold) water spigots.
- Dwal indikaturi:
- The "HOT" indicator light illuminates when the hot water heating element is active. It will turn off once the desired hot temperature is reached.
- The "COLD" indicator light illuminates when the cold water cooling system is active. It will turn off once the desired cold temperature is reached.
- Tqassim ta' Ilma Kesaħ: Place a cup under the blue (cold) faucet. Push the blue lever down to dispense cold water. Release the lever to stop.
- Dispensing Hot Water (Child Safety Lock): Place a cup under the red (hot) faucet. Push the red child safety lock button inward, then push the red lever down to dispense hot water. Release both the button and lever to stop. Always exercise caution when dispensing hot water.
- Iffrankar tal-Enerġija: The unit utilizes an energy-saving thermoelectric heating and cooling system. To further conserve energy, you may turn off the hot or cold functions using the switches located on the back of the unit if not needed for extended periods.
Image: The Farberware FW-WD211 water dispenser in a kitchen setting, demonstrating its use for refreshing beverages with a pitcher and glass.
Manutenzjoni
Regular cleaning and maintenance will ensure optimal performance and hygiene of your water dispenser.
- Spluggja qabel it-Tindif: Always unplug the dispenser from the power outlet before cleaning or performing any maintenance.
- Ilma vojt: Drain all water from both hot and cold tanks by dispensing until no more water comes out.
- Clean Water Barrel Seat: The water barrel seat is removable for easy cleaning.
- Gently lift and remove the water barrel seat from the top of the dispenser.
- Wash it with mild soap and warm water. Rinse thoroughly and dry completely before reattaching.
- Naddaf Drip Trey: Remove the drip tray and grid. Wash them with mild soap and warm water, rinse, and dry.
- Tindif Esterni: Imsaħ il-barra tad-dispenser b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
- Internal Cleaning (Recommended Quarterly): For thorough internal cleaning, a food-grade cleaning solution or a mixture of water and white vinegar can be used. Follow the instructions provided with the cleaning solution or use a 1:4 vinegar-to-water ratio. Flush thoroughly with clean water afterward.
Issolvi l-problemi
Review il-kwistjonijiet u s-soluzzjonijiet komuni li ġejjin qabel ma tikkuntattja l-appoġġ għall-klijenti.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda tqassim ta 'ilma | Water bottle empty or not properly seated; airlock in system. | Replace water bottle. Re-seat bottle firmly. Dispense from both faucets to release air. |
| L-ebda ilma sħun | Hot water switch off; heating element malfunction. | Check the hot water switch on the back of the unit. Ensure the unit is plugged in. Allow time for heating. |
| L-ebda ilma kiesaħ | Cold water switch off; cooling system malfunction. | Check the cold water switch on the back of the unit. Ensure the unit is plugged in. Allow time for cooling. |
| Ilma inixxi | Water bottle cracked or not seated correctly; internal leak. | Check water bottle for cracks. Re-seat bottle firmly. If leak persists, unplug and contact support. |
| Ħoss mhux tas-soltu | Normal operation (cooling/heating cycles); unit not level. | Ensure the unit is on a level surface. Some noise during cooling/heating cycles is normal. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Farberware |
| Numru tal-Mudell | FW-WD211 |
| Kulur | Abjad |
| Dimensjonijiet tal-Prodott (L x W x H) | 41.91 ċm x 33.02 ċm x 30.48 ċm (16.5 x 13 x 12 pulzieri) |
| Piż tal-oġġett | 3.83 kg (8.44 lbs) |
| Compatible Water Bottle Capacity | 3 jew 5 Gallon |
| Tip ta' Installazzjoni | Countertop, Freestanding |
| UPC | 765167970909 |
Image: Product packaging illustrating the dimensions and weight of the Farberware FW-WD211 water dispenser.
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u l-appoġġ għall-klijenti, jekk jogħġbok irreferi għall-websajt uffiċjali tal-manifattur. webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
For assistance, please visit the Farberware website or contact their customer support line. Specific contact details may vary by region.
