ABC Design Genua Baby Stroller Instruction Manual

1. Informazzjoni Importanti dwar is-Sigurtà

Read all instructions carefully before assembling and using the ABC Design Genua baby stroller. Failure to follow these instructions could result in serious injury or death to your child.

• Qatt tħalli lit-tifel/tifla tiegħek waħdu fil-stroller.
• Dejjem uża l- Sistema ta' xedd ta' 5 punti to secure your child.
• Ensure all locking devices are engaged before placing a child in the stroller.
• Teċċedix il-piż massimu rakkomandat ta' 15 kg (33 lbs).
• Do not place more than 2 kg (4.4 lbs) in the storage basket.
• Tiddendelx basktijiet jew oġġetti oħra fuq il-manku, għax dan jista' jikkawża li l-istroller ma jkunx stabbli.
• Keep children away from the stroller during folding and unfolding to prevent injury.
• Regularly inspect the stroller for loose parts, damaged components, or worn fabric. Discontinue use if any damage is found.
• Dan stroller huwa ddisinjat għal tifel wieħed biss.

2. Kontenut tal-Pakkett

Malli tiftaħ il-pakkett, ivverifika li l-komponenti kollha huma preżenti:

• Stroller Frame with Seat Unit
• Kanupew
• Wheels (if not pre-attached)
• Manwal ta' Istruzzjoni

3. Setup u Assemblea

3.1 Kif tiftaħ il-Praġġier

1. Poġġi l-istroller mitwi fuq wiċċ ċatt.
2. Locate the folding latch, usually on the side of the frame. Release the latch.
3. Lift the handlebar upwards until the frame fully extends and locks into place. You should hear an audible "click" indicating that the frame is securely locked.
4. Kun żgur li l-mekkaniżmi ta 'qfil kollha jkunu ingaġġati qabel l-użu.

Figure 1: Fully assembled ABC Design Genua stroller, front view.

3.2 It-twaħħil tal-Canopy

The canopy typically attaches to designated points on the stroller frame near the handlebar. Secure the canopy clips or snaps firmly to the frame until they are locked in place.

Figura 2: Ġenb view of the stroller with canopy extended.

4. Istruzzjonijiet Operattivi

4.1 Securing Your Child (5-Point Harness)

1. Poġġi lit-tifel/tifla tiegħek fis-sedil.
2. Bring the shoulder straps over your child's shoulders and the waist straps around their waist.
3. Insert the two buckle prongs (shoulder and waist straps) into the central buckle until they click securely.
4. Adjust the straps to ensure a snug fit without being too tight. The harness should be adjusted so that you can fit one finger between the strap and your child's body.
5. To release, press the button on the central buckle.

4.2 Aġġustament tal-Kanupew

The canopy can be extended or retracted by pushing or pulling it along its frame. Adjust it to provide optimal shade and protection for your child.

Figure 3: Stroller with canopy adjusted for maximum coverage.

4.3 Engaging and Releasing Brakes

The ABC Design Genua stroller is equipped with a foot-operated brake system, typically located on the rear wheels. To engage the brakes, press down firmly on the brake lever(s) until the stroller is stationary. To release, lift the lever(s) upwards. Always engage the brakes when the stroller is parked.

4.4 It-tiwi tal-istroller

1. Ensure your child is removed from the stroller.
2. Iqabbad il-brejkijiet.
3. Retract the canopy.
4. Locate the folding mechanisms (often levers or buttons on the handlebar or frame). Activate these mechanisms simultaneously.
5. Push the handlebar downwards and forwards, allowing the stroller frame to collapse.
6. Waħħal il-lukkett li jintrewa biex iżżomm il-stroller fil-pożizzjoni kompatta u mitwija tiegħu.

Figure 4: Stroller in folded position.

5. Manutenzjoni

5.1 Tindif

• Partijiet tad-drapp: Post nadif ma adamp drapp u sapun ħafif. Tużax deterġenti ħarxa jew bliċ. Ħallih jinxef kompletament bl-arja.
• Qafas: Imsaħ il-qafas tal-aluminju b'ċarruta ratba u damp drapp. Nixxef sew biex tevita s-sadid.
• Roti: Naddaf ir-roti regolarment biex tneħħi l-ħmieġ u l-fdalijiet.

5.2 Lubrikazzjoni

Periodically apply a silicone-based lubricant to moving parts such as wheel axles and folding mechanisms to ensure smooth operation. Avoid using oil-based lubricants as they can attract dirt.

5.3 Ħażna

Store the stroller in a dry, cool place away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storing to prevent mold or mildew.

6 Issolvi l-problemi

• Il-pram mhux qed jinfetaħ/jintewa bla xkiel: Check for any obstructions in the folding mechanism. Ensure all latches are released before unfolding and engaged after folding. Lubricate moving parts if necessary.
• Roti jgħajjtu: Clean the wheels and axles to remove dirt. Apply a silicone-based lubricant to the axles.
• Harness not securing: Ensure the buckle prongs are fully inserted into the central buckle. Adjust straps for a snug fit.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information, product support, or to purchase replacement parts, please contact ABC Design customer service. Retain your proof of purchase for warranty claims.

Please refer to the official ABC Design website or the contact information provided with your purchase for specific details regarding warranty periods and service procedures.