HID Global RP10-H Reader User Manual

1. Introduzzjoni

The HID Global RP10-H (Model: 900PHRNEK00466) is a versatile multi-technology access control reader designed for secure identification. This reader supports various credential technologies including PIVCLS, SE E, and operates with HF (High Frequency) standards, SIO, SEOS, and FIPS compliance. It is engineered for robust performance in access control systems, providing reliable authentication for authorized personnel. This manual provides essential information for the proper installation, operation, and maintenance of your RP10-H reader.

Deskrizzjoni tal-Immaġni: The image above displays the HID Global logo, which features the word "HID" in bold white capital letters against a solid blue rectangular background with rounded corners. A small registered trademark symbol (®) is visible in the upper right corner of the blue rectangle.

2. Setup u Installazzjoni

Proper installation is crucial for the optimal performance of the RP10-H reader. It is recommended that installation be performed by qualified personnel.

2.1. Kontenut tal-Pakkett

HID Global RP10-H Reader (Model: 900PHRNEK00466)
Ħardwer tal-Immuntar (viti, ankri)
Gwida għall-Installazzjoni (dan id-dokument)

2.2. Istruzzjonijiet għall-Immuntar

Choose a suitable mounting location, ensuring it is flat and free from obstructions.
Use the provided mounting template (if applicable) to mark drilling points.
Drill toqob pilota għall-viti tal-immuntar.
Secure the reader to the mounting surface using the provided hardware. Ensure the reader is firmly attached.

2.3. Wiring u Konnessjoni tal-Enerġija

The RP10-H reader requires a stable power supply and proper connection to the access control panel. Refer to the wiring diagram provided with your specific access control system for detailed connections.

Connect the reader's power input to a regulated DC power supply (typically 5-16 VDC).
Connect the data lines (e.g., Wiegand, OSDP) to the corresponding inputs on your access control panel.
Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati biex jipprevjenu short circuits.
Verify proper grounding to prevent electrical interference.

3. Tħaddim tal-Qarrej

Once installed and powered, the RP10-H reader is ready for operation.

3.1. Credential Presentation

To gain access, present your compatible access credential (e.g., PIV, SEOS card, mobile credential) within close proximity to the reader's face. The optimal reading distance may vary depending on the credential type and environmental factors.

3.2. LED and Audible Indicators

The RP10-H reader provides visual and audible feedback to indicate its status and the outcome of a credential presentation.

Indikatur	Deskrizzjoni
LED aħdar	Indicates successful credential read and access granted.
LED aħmar	Indicates credential read error or access denied.
Amber/Yellow LED	Indicates reader busy or awaiting input.
Ħoss Uniku	Successful credential read.
Multiple Beeps	Error during credential read or access denied.

4. Manutenzjoni

The HID Global RP10-H reader is designed for minimal maintenance.

Tindif: Periodically wipe the reader's surface with a soft, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
Aġġornamenti tal-Firmware: Firmware updates may be available from HID Global to enhance performance or add new features. Consult your system administrator or HID Global support for information on applying updates.
Spezzjoni: Regularly inspect the reader and its wiring for any signs of damage or wear.

5 Issolvi l-problemi

If you encounter issues with your RP10-H reader, refer to the following common troubleshooting steps.

Problema	Kawża Possibbli	Soluzzjoni
Reader is unresponsive (no LEDs, no sound).	Ebda enerġija jew wajers mhux korretti.	Iċċekkja l-konnessjonijiet tal-provvista tal-enerġija. Verify power source is active and providing correct voltage. Inspect wiring for breaks or loose connections.
Credential not reading or access denied (Red LED/multiple beeps).	Incompatible credential. Credential damaged or expired. Reader interference. Access control system issue.	Ensure credential is compatible with RP10-H (PIVCLS, SE E, HF STD/SIO/SEOS/FIPS). Try a different, known-good credential. Check for nearby metallic objects or strong electromagnetic fields. Contact your system administrator to verify credential enrollment and access permissions.
Intermittent reading.	Interferenza ambjentali. Wiring maħlul.	Ensure reader is not mounted directly on metal or near large metal objects. Re-check all wiring connections for tightness.

For issues not resolved by these steps, please contact HID Global technical support or your system integrator.

6. Speċifikazzjonijiet

Karatteristika	Dettall
Numru tal-Mudell	900PHRNEK00466
Brand	HID Globali
Teknoloġiji Appoġġjati	PIVCLS, SE E, HF STD/SIO/SEOS/FIPS
Kulur	Iswed (BLK)
Interface	Wiegand (WG)
Dimensjonijiet tal-Pakkett	8 x 8 x 8 pulzieri
Piż tal-oġġett	1 liri
ASIN	B07N5872JC
Data L-Ewwel Disponibbli	4 ta’ Settembru, 2019

7. Garanzija u Appoġġ

For information regarding the product warranty, please refer to the warranty documentation provided with your purchase or visit the official HID Global websit.

For technical support, product inquiries, or further assistance, please contact HID Global customer service or your authorized distributor.

HID Global Official Websit: www.hidglobal.com
Appoġġ Tekniku: Refer to the support section on the HID Global websit għal dettalji ta' kuntatt speċifiċi għar-reġjun tiegħek.

	Gwida għall-Utent tal-App HID Reader Manager (iOS) - Immaniġġja l-Qarrejja tal-Kontroll tal-Aċċess Esplora l-Gwida għall-Utent tal-App HID Reader Manager għall-iOS. Tgħallem kif tinstalla, tikkonfigura, u timmaniġġja l-qarrejja HID Signo u iCLASS SE, taġġorna l-firmware, u ssolvi kwistjonijiet komuni għal sigurtà mtejba tal-kontroll tal-aċċess.
	Gwida għall-Utent tal-HID Linq On Premise Din il-gwida għall-utent tipprovdi struzzjonijiet komprensivi għall-installazzjoni u l-konfigurazzjoni ta' HID Linq On Premise, il-konnessjoni ta' qarrejja HID Signo, il-ġestjoni tal-IDs tal-konfigurazzjoni, l-aġġornament tal-firmware, u l-immaniġġjar ta' ċwievet apposta. Tkopri r-rekwiżiti tas-sistema, il-hardware, il-verżjonijiet tas-software, u passi dettaljati għal diversi operazzjonijiet.
	Gwida għall-Qarrejja tal-HID Signo: Nifhmu n-Numri tal-Partijiet Gwida għall-fehim tan-numri tal-partijiet tal-qarrej HID Signo, li tispjega t-tifsira ta' kodiċijiet differenti għall-istil, l-għażliet tat-tastiera, u l-kompatibilità tat-teknoloġija.
	Gwida għall-Installazzjoni tal-HID VertX EVO V1000 Din il-gwida tipprovdi struzzjonijiet komprensivi għall-installazzjoni u l-konfigurazzjoni tal-kontrollur tal-aċċess HID VertX EVO V1000. Tkopri l-konnessjonijiet tal-ħardwer, is-setup tan-netwerk bl-użu ta' Discovery Client jew Virtual Port, il-konfigurazzjoni tal-komunikazzjoni, is-soluzzjoni tal-problemi, is-sostituzzjoni tal-batterija, il-konsiderazzjonijiet tal-firewall, u l-konformità regolatorja.
	Gwida għall-Utent tal-HID FARGO Connect Console - Konfigurazzjoni, Tħaddim, u Speċifikazzjonijiet Gwida komprensiva għall-utent għall-HID FARGO Connect Console (Mudell X002400), li tkopri s-setup, il-konnessjoni, it-tħaddim, il-ġestjoni tal-istampar, l-appoġġ tas-sistema, l-ispeċifikazzjonijiet, u l-informazzjoni regolatorja.
	Gwida għall-Installazzjoni tal-Qarrej HID ProxPoint Plus, MiniProx, ThinLine II, u Prox80 Gwida komprensiva għall-installazzjoni għall-qarrejja tal-kontroll tal-aċċess HID ProxPoint Plus, MiniProx, ThinLine II, u Prox80, li tkopri l-wajers, il-komponenti, u s-setup. Tinkludi n-numri tal-mudelli, l-ispeċifikazzjonijiet, u l-informazzjoni ta' kuntatt.

HID 900PHRNEK00466