1. Introduzzjoni
This manual provides comprehensive instructions for the installation, setup, and operation of your LoraTap WiFi Smart Curtain Switch. This device allows for convenient control of motorized curtains, blinds, and projection screens via touch, mobile application, and voice commands through compatible smart home systems.
Jekk jogħġbok aqra dan il-manwal bir-reqqa qabel l-installazzjoni u l-użu biex tiżgura l-funzjonament xieraq u s-sigurtà.
2. Karatteristiċi tal-prodott
- Funzjoni tal-ħin: Schedule automatic opening and closing of curtains via the mobile application.
- Kontroll tal-App: Remote control from anywhere using the "Smart Life" application (2.4 GHz Wi-Fi required).
- Kontroll tal-Vuċi: Kompatibbli ma' Amazon Alexa u Google Home għal tħaddim mingħajr idejn.
- Safe Touch Panel: 4mm tempered glass panel for safe operation, even with wet hands.
- Kompatibilità Wiesgħa: Works with most smart curtains, blinds, and projection screens that use a 4-wire motor.
Immaġni: Fuqview of control methods including remote, timer, touch, and voice control.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- 1 x LoraTap WiFi Curtain Switch
- 1 x Gwida għall-Utent (dan id-dokument)
4. Speċifikazzjonijiet
| Input Voltage | 100-250V 50/60Hz |
| Wiring | Live wire and Neutral wire required |
| Kapaċità tat-Tagħbija | ≤600W |
| Pjanċa tal-ħġieġ | Ħġieġ ittemprat ta '4mm |
| Wi-Fi Standard | 2.4 GHz 802.11 b/g/n (5GHz Wi-Fi not supported) |
| Konsum ta' Enerġija Standby | ≤0.5W |
| Temperatura tax-Xogħol | -30°C sa 70°C (-22°F sa 158°F) |
| Dimensjonijiet | 72 x 120 x 39mm (approximately 2.83 x 4.72 x 1.54 inches) |
| Materjal | Acrylonitrile Butadiene Styrene (ABS) |
| Klassifikazzjoni kurrenti | 6 Amps |
| Vol Operattivtage | 250 Volts |
Image: Physical dimensions of the switch and demonstration of its waterproof tempered glass panel.
5. Informazzjoni dwar is-Sigurtà
- Periklu Elettriku: Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Itfi: Dejjem itfi l-enerġija mis-circuit breaker qabel ma tinstalla, tneħħi, jew tagħmel manutenzjoni fuq is-swiċċ.
- Wiring: This switch requires both a live wire and a neutral wire for operation. Ensure your electrical box has both.
- Kompatibilità tal-Mutur: This switch is designed for 4-wire motorized curtains/blinds/shutters (Brown-Open, Blue-Common, Black-Close, Yellow&Green-Ground). It is not compatible with 2-wire motors.
- Użu fuq ġewwa biss: Do not install this device in outdoor environments or areas exposed to direct water.
6. Installazzjoni
- Itfi l-Enerġija: Locate the circuit breaker controlling the power to the switch location and turn it off. Verify power is off using a voltagtester.
- Neħħi s-Swiċċ il-Qadim: Carefully remove your existing curtain switch from the wall box.
- Identifika l-Wajers: Identify the Live (L), Neutral (N), Open (L1), Close (L2), and Ground wires. This switch requires a neutral wire.
- Qabbad Wajers: Connect the wires to the LoraTap WiFi Curtain Switch according to the wiring diagram below. Ensure all connections are secure.
- Swiċċ tal-Immuntar: Gently push the switch into the wall box and secure it with screws. Attach the glass panel.
- Irrestawra l-Enerġija: Ixgħel il-qawwa lura fis-circuit breaker.
7. Dijagramma tal-Wajers
The LoraTap WiFi Curtain Switch requires a 4-wire motor connection. Refer to the diagram below for correct wiring:
- Input L: Live Wire (from mains power)
- Input N: Neutral Wire (from mains power)
- Output N: Neutral Wire (to motor)
- Output L1: Open Wire (to motor, typically Brown)
- Output L2: Close Wire (to motor, typically Black)
- Art: Ground Wire (to motor, typically Yellow & Green)
Image: Detailed wiring diagram showing connections for Input L, Input N, Output N, Output L1, Output L2, and Ground. Also illustrates variable use cases for curtains, blinds, and projector screens.
Importanti: Ensure your motor has 4 wires (Open, Common, Close, Ground). The common wire from the motor connects to Output N on the switch.
8. App Setup (Smart Life App)
- Niżżel l-App: Niżżel l-app "Smart Life" mill-App Store (iOS) jew mill-Google Play Store (Android).
- Reġistrazzjoni/Idħol: Iftaħ l-app u rreġistra kont ġdid jew idħol b'wieħed eżistenti.
- Rekwiżit tal-Wi-Fi: Kun żgur li l-apparat mobbli tiegħek huwa konness ma' Netwerk Wi-Fi 2.4 GHz. This switch does not support 5 GHz Wi-Fi. If you have a dual-band router, you may need to separate the 2.4 GHz and 5 GHz bands in your router settings.
- Żid Apparat: In the Smart Life app, tap the "+" icon in the top right corner to add a device.
- Agħżel it-Tip ta' Apparat: Choose "Curtain Switch" or "Wall Switch (Wi-Fi)" from the list of device types.
- Mod ta 'tqabbil: Follow the in-app instructions to put the switch into pairing mode. This usually involves pressing and holding a button on the switch until an indicator light flashes rapidly.
- Qabbad: Enter your 2.4 GHz Wi-Fi network password in the app and proceed with the connection.
- Isemmi l-Apparat: Once connected, you can rename the switch for easier identification (e.g., "Living Room Curtains").
Image: The LoraTap Smart Curtain Switch shown alongside a smartphone running the Smart Life application, demonstrating app control.
9. Integrazzjoni tal-Kontroll tal-Vuċi
The LoraTap WiFi Smart Curtain Switch can be integrated with Amazon Alexa and Google Home for voice control.
9.1. Integrazzjoni ta' Amazon Alexa
- Iftaħ l-app Amazon Alexa.
- Go to "Skills & Games".
- Fittex għal "Smart Life" and enable the skill.
- Link your Smart Life account with your Alexa account.
- Discover devices. Alexa will find your LoraTap Curtain Switch.
- You can now use voice commands like: "Alexa, open [Curtain Name]", "Alexa, close [Curtain Name]".
9.2. Google Home Integration
- Iftaħ l-app Google Home.
- Tap "+" then "Set up device" > "Works with Google".
- Fittex għal "Smart Life" u waħħal il-kont Smart Life tiegħek.
- Assign your LoraTap Curtain Switch to a room.
- You can now use voice commands like: "Hey Google, open [Curtain Name]", "Hey Google, close [Curtain Name]".
Image: Illustration of automatic curtain scheduling and voice control integration with Amazon Alexa.
10. Operazzjoni
10.1. Kontroll tal-Panel tat-Touch
- Vleġġa 'l fuq: Touch to open the curtains.
- Square (Pause): Touch to pause the curtains at their current position.
- Vleġġa 'l isfel: Touch to close the curtains.
10.2. Kontroll tal-App
- Open the "Smart Life" app.
- Select your LoraTap Curtain Switch.
- Use the virtual buttons to open, close, or pause your curtains.
- Set schedules or timers for automated operation.
Image: Demonstrates that multiple users can control one switch, and one command can control a group of switches.
11. Manutenzjoni
- Tindif: Imsaħ il-pannell tal-ħġieġ b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Aġġornamenti tal-Firmware: Iċċekkja l-app Smart Life perjodikament għal aġġornamenti tal-firmware disponibbli biex tiżgura prestazzjoni u sigurtà ottimali.
- Evita l-Ilma: While the panel is tempered glass, avoid excessive water exposure to the internal components.
12 Issolvi l-problemi
- Is-Swiċċ Mhux Jirrispondi:
- Iċċekkja jekk is-circuit breaker hu mixgħul.
- Iċċekkja li l-konnessjonijiet tal-wajers huma siguri u korretti.
- Ensure the motor is a 4-wire type and functioning correctly.
- Ma tistax tikkonnettja mal-Wi-Fi:
- Confirm your router is broadcasting a 2.4 GHz Wi-Fi network.
- Kun żgur li t-telefon tiegħek huwa konness man-netwerk ta' 2.4 GHz waqt is-setup.
- Iċċekkja s-saħħa tas-sinjal tal-Wi-Fi fil-post tas-swiċċ.
- Restart your router and try pairing again.
- Ensure the switch is in pairing mode (indicator light flashing rapidly).
- Il-Kontroll tal-Vuċi Mhux Jaħdem:
- Verify the Smart Life skill/service is enabled and linked in your Alexa/Google Home app.
- Ensure the device name in Smart Life matches the name you are using for voice commands.
- Ipprova skopri mill-ġdid apparati fl-app Alexa/Google Home tiegħek.
- Curtains Move in Wrong Direction:
- In the Smart Life app, check if there's an option to reverse motor direction.
- Alternatively, swap the L1 (Open) and L2 (Close) wires at the switch (after turning off power).
13. Garanzija u Appoġġ
LoraTap products are designed for reliability and performance. For warranty information, technical support, or assistance with your LoraTap WiFi Smart Curtain Switch, please refer to the contact information provided with your purchase or visit the official LoraTap websit.
Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.
