FLEXISPOT OC3 Air Ergonomic Office Chair Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT OC3 Air Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

• This product has a maximum weight capacity of 300 lbs. Do not exceed this limit.
• Improper use of adjustable features, such as the armrests and tilt mechanism, could result in injury.
• Dejjem segwi l-istruzzjonijiet tal-assemblaġġ bir-reqqa.
• Refer to this user manual for safe operation and adjustments.
• Keep children away from the chair during assembly and adjustment to prevent accidents.

3. Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, kun żgur li l-partijiet kollha huma preżenti u mhux imħassra. Jekk xi partijiet huma neqsin jew imħassra, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

• Backrest (x1)
• Sedil (x1)
• Mechanism (x1)
• Gas Lift (x1)
• Headrest (x1)
• Clothes Hanger (x1)
• Casters (x5)
• Wrench (x2)
• Armrest (x2)
• Bażi (x1)
• Screws: M6*25 (6pcs), M6*20 (4pcs), M8*18 (3pcs)
• Manwal ta' Installazzjoni (x1)

Image: All components of the FLEXISPOT OC3 Air chair laid out for assembly.

4. Istruzzjonijiet tal-Assemblea

Assembly is required. An installation manual and tools are included. Follow the steps below for proper assembly.

1. Install Casters and Gas Lift: Insert the five casters into the base. Then, insert the gas lift into the center hole of the base. Remove the protective cover from the gas lift before installation.
2. Attach Mechanism to Backrest: Secure the chair mechanism to the backrest using the provided M8*18 screws. Ensure correct alignment before tightening.
3. Installa l-Armrests: Attach the armrests to the seat using the M6*25 screws. Do not fully tighten all screws until they are fixed in the correct position.
4. Install Mechanism to Seat: Secure the mechanism to the underside of the seat using the M6*20 screws.
5. Poġġi s-Sedil fuq il-Lift tal-Gass: Carefully place the assembled seat and backrest onto the gas lift, ensuring it is securely seated.
6. Attach Headrest and Clothes Hanger: Unscrew the two screws on the headrest, insert the clothes hanger into the headrest, and secure them on the backrest.

Image: Diagram illustrating the assembly of the chair's base and gas lift.

Image: Diagram illustrating the attachment of the backrest, armrests, and seat.

5. Operating Instructions (Adjustable Features)

Your FLEXISPOT OC3 Air chair is designed with multiple adjustable features to enhance comfort and support.

• Aġġustament tal-Għoli tas-Sedil: Use the lever located under the seat to raise or lower the chair to your desired height. Pull the lever up while seated to lower, or pull up while standing to raise.
• 2D Headrest Adjustment: The headrest can be adjusted in multiple dimensions (up/down and 30° rotation) to provide precise neck and head support. Simply push or pull the headrest to adjust its height and angle.
• Appoġġ Lumbari Aġġustabbli: The lumbar support can be moved up and down by 1.9 inches to provide accurate support to your lower back. Adjust it to fit the natural curve of your spine.
• Lockable Backrest Tilt (90-130°): The chair features a four-level tilt tension lockable line control mechanism. Use the lever to recline the backrest between 90° and 130° or lock it in an upright position.
• Armrests aġġustabbli: The armrests can be adjusted in height (1D Up/Down) to provide comfortable support for your arms and shoulders. Use the button on the side of the armrest to unlock and adjust.
• Clothes Hanger: A convenient hanger is integrated into the headrest for temporarily holding clothes.

Immaġni: Fuqview of chair dimensions and adjustable features.

Image: Visual guide to chair adjustments.

6. Manutenzjoni

To ensure the longevity and optimal performance of your FLEXISPOT OC3 Air chair, follow these simple maintenance guidelines:

• Tindif: Imsaħ nadif bl adamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the mesh or frame.
• Spezzjoni regolari: Iċċekkja l-viti u l-konnessjonijiet kollha perjodikament biex tiżgura li huma ssikkati. Erġa' ssikka jekk meħtieġ.
• Evita tagħbija żejda: Taqbiżx il-kapaċità ta 'piż massimu ta' 300 lbs.
• Użu xieraq: Use the chair as intended for office or home workspace. Avoid standing on the chair or using it for purposes other than seating.

7 Issolvi l-problemi

If you encounter any issues with your FLEXISPOT OC3 Air chair, please refer to the assembly instructions or contact customer support for assistance.

• Diffikultà fl-Aġġustament tal-Għoli: Ensure the gas lift protective cover has been removed and the lever is fully engaged.
• It-Tbandil tas-Siġġu: Check that all screws are securely tightened and the base is properly assembled.
• Backrest Not Tilting/Locking: Verify that the tilt tension mechanism is correctly engaged and not obstructed.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the official FLEXISPOT webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.