Ultimate Speed Portable Power Bank and Car Jump Starter

1. Introduzzjoni

Thank you for choosing the Ultimate Speed Portable Power Bank and Car Jump Starter. This versatile 2-in-1 device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for charging electronic devices. Please read this manual carefully before first use to ensure safe and optimal operation.

2. Informazzjoni dwar is-Sigurtà

WARNING: Improper use can lead to serious injury or damage to the device/vehicle.

• Dejjem ilbes protezzjoni għall-għajnejn u ingwanti meta taħdem bil-batteriji.
• Tesponix l-apparat għax-xita, umdità, jew temperaturi estremi.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Żgura ventilazzjoni xierqa waqt l-użu.
• Tagħmilx short circuit tal-jump starter clamps.
• Do not attempt to jump start a frozen or visibly damaged battery.
• This device is spark-proof, but always avoid contact with flammable materials.
• Disconnect the device from the vehicle battery immediately after jump-starting.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• Ultimate Speed Portable Power Bank and Car Jump Starter
• 12V Jump Start Cable with clamps
• Micro USB Adapter for mobile phones/tablets
• Fabric Storage Case
• Acrylonitrile Butadiene Styrene (ABS) Plastic Case
• Ċarġer (Adapter tal-Enerġija)

Image: The Ultimate Speed jump starter with its complete set of accessories, including the jump start cables, USB charging cable, and power adapter.

4. Karatteristiċi u Komponenti tal-Prodott

The Ultimate Speed Jump Starter features a robust design and advanced technology for reliable performance.

• Funzjonalità 2-in-1: Car jump starter and powerful power bank.
• Portijiet Multipli: Two USB output ports (1A/2A) and one Micro-USB input port (5V/1A).
• Torċa LED Integrata: With a blinking function for emergencies.
• Protezzjoni Avvanzata: Built-in safeguards against reverse polarity, short circuit, and overload. Detects defective batteries and deep discharges for maximum user and electronic protection.
• Disinn li ma jgħaddix xrar: Enhances safety during connection.
• Batterija LiFePO4: Powerful Lithium-Ion (Iron Phosphate) battery for high electronic efficiency (up to 90% usable capacity), long cycle stability, and very low self-discharge.
• Wiċċ li ma jiżloqx: Għal immaniġġjar sigur.
• Direct Start: Provides a high current pulse for immediate starting without long charging times.

Immaġni: Quddiem view of the Ultimate Speed jump starter, showing the product label with model information and key specifications.

Immaġni: Ġenb view of the device, highlighting the USB output ports, Micro-USB input, 12V output, power button, and integrated LED flashlight.

5. Setup

5.1 Initial Charging of the Device

Before first use, fully charge the jump starter. Connect the provided charger to the Micro-USB input port on the device and plug it into a 230V mains outlet. The charging time is approximately 13.5 hours for a full charge. The charge status is indicated by individual start LEDs.

5.2 Iċċekkjar tal-Livell tal-Iċċarġjar

Press the power button briefly to check the current charge level. The LEDs will illuminate to indicate the remaining battery capacity.

6. Istruzzjonijiet Operattivi

6.1 Aqbeż Startjar ta' Vettura

This device is suitable for petrol engines up to 3.0 L displacement and diesel engines up to 2.0 L displacement.

1. Kun żgur li l-jump starter huwa ċċarġjat biżżejjed.
2. Turn off the vehicle's ignition and all electrical accessories.
3. Qabbad l-aħmar (+) clamp of the jump start cable to the positive (+) terminal of the vehicle's battery.
4. Qabbad l-iswed (-) clamp of the jump start cable to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery.
5. Connect the jump start cable's plug to the 12V output port on the jump starter.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds.
7. Once the engine starts, immediately disconnect the jump start cable from the jump starter.
8. Then, disconnect the black (-) clamp from the vehicle, followed by the red (+) clamp.

Image: The Ultimate Speed jump starter connected to a car battery, demonstrating the proper clamp placement for jump-starting.

Immaġni: Oħra view of the jump starter connected to a car battery, showing the compact size of the device in an engine bay.

6.2 Użu bħala Power Bank

The device can charge mobile phones, tablets, and other USB-powered devices.

1. Connect your device's USB charging cable to one of the USB output ports (1A or 2A) on the jump starter.
2. Qabbad it-tarf l-ieħor tal-kejbil mat-tagħmir elettroniku tiegħek.
3. The jump starter will begin charging your device automatically.

Image: The jump starter being used as a power bank, charging a smartphone via its USB port.

6.3 L-Użu tat-Torċa LED

Press and hold the power button to turn the LED flashlight on or off. Press the power button briefly while the flashlight is on to cycle through different modes (e.g., steady light, blinking light).

7. Manutenzjoni

• Iċċarġjar mill-ġdid: To maintain battery health, recharge the jump starter every 3-6 months, even if not in use.
• Ħażna: Aħżen l-apparat f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Tindif: Naddaf l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For warranty claims or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms and conditions may vary by region and retailer.