YAMAZAKI 4480-P

Yamazaki Home Tower Expandable Support Rack

Mudell: 4480-P

Marka: YAMAZAKI

Introduzzjoni

This manual provides essential information for the proper assembly, operation, and maintenance of your Yamazaki Home Tower Expandable Support Rack. Please read these instructions carefully before use to ensure safe and efficient product functionality.

The Yamazaki Home Tower Expandable Support Rack is designed to enhance kitchen countertop or cabinet space. Its expandable design allows for flexible placement and increased storage capacity for various kitchen essentials.

Informazzjoni dwar is-Sigurtà

  • Importanti: Do not place the rack directly over heat sources such as stovetop burners or hot appliances.
  • Ensure the rack is placed on a stable, flat surface to prevent tipping.
  • Do not exceed the maximum load-bearing weight of 22 pounds (10 kg) for the shelf and 250g per hook.
  • Żomm partijiet żgħar 'il bogħod mit-tfal waqt l-assemblaġġ.

Kontenut tal-Pakkett

  • Expandable Shelf Unit (main components)
  • 5 x Plastic Hooks
  • Ċavetta tal-Assemblea
  • Viti għall-immuntar

Setup u Assemblea

Assembly is required for this product. The estimated assembly time is approximately 20 minutes. Please follow these steps carefully:

  1. Iftaħ il-komponenti kollha mill-pakkett u vverifika mal-lista tal-kontenut tal-pakkett.
  2. Identify the main shelf sections and the support legs.
  3. Attach the support legs to the main shelf sections using the provided screws and wrench. Ensure all screws are securely tightened.
    Note: Some screws may be small and require careful alignment. Patience during this step will ensure proper stability.
  4. Once assembled, place the unit on your desired countertop or surface.
Yamazaki Home Tower Expandable Support Rack components
Image: Initial assembly of the Yamazaki Home Tower Expandable Support Rack. This image shows the main shelf components and support legs before full assembly.
Assembled Yamazaki Home Tower Expandable Support Rack
Image: The Yamazaki Home Tower Expandable Support Rack fully assembled, ready for use.

Istruzzjonijiet Operattivi

The Yamazaki Home Tower Expandable Support Rack is designed for versatile use in your kitchen.

  • Espansjoni: The rack can be expanded from 22.25 inches to 36.25 inches (56.5 cm to 92 cm) in width. Gently slide the two shelf sections apart or together to achieve your desired length. Ensure the sections are evenly extended for optimal stability.
  • Użu tal-ganċ: The 5 included plastic hooks can be attached to the front bar of the rack. These are suitable for hanging lightweight kitchen tools such as scissors, measuring cups, or oven mitts. Each hook supports up to 250g.
  • Pjazzament: Position the rack over a sink for drying dishes or sponges, or over a stovetop (ensuring it is not directly over heat) for spices and oils. It can also be used on any countertop to create additional vertical storage.
Yamazaki Home Tower Expandable Support Rack dimensions
Image: Diagram illustrating the expandable width of the rack, ranging from 22.25 to 36.25 inches, and its height of 9.25 inches.
Yamazaki Home Tower Expandable Support Rack with hooks
Image: The rack in use, demonstrating how the included hooks can be utilized to hang kitchen utensils and accessories from the front bar.
Yamazaki Home Tower Expandable Support Rack in kitchen setting
Image: The expandable support rack positioned on a kitchen counter, holding various kitchen items such as pots, bottles, and spice grinders.

Manutenzjoni u Kura

To maintain the appearance and longevity of your Yamazaki Home Tower Expandable Support Rack, follow these care instructions:

  • Tindif: Imsaħ nadif b'artab, damp cloth and a light soap or detergent. Immediately wipe dry to prevent water spots or rust.
  • Materjali: The frame is constructed from powder-coated steel. This finish is water-repellant and provides a smooth surface.
  • Evita li tuża prodotti tat-tindif li joborxu, kimiċi ħarxa, jew pads tal-għorik, għax dawn jistgħu jagħmlu ħsara lill-finitura.

Issolvi l-problemi

  • Issue: Difficulty with screw insertion during assembly.
    Soluzzjoni: Ensure the components are correctly aligned before attempting to insert screws. Apply gentle, consistent pressure and use the provided wrench. If a screw feels stripped, re-evaluate alignment.
  • Issue: Rack feels wobbly or unstable after assembly.
    Soluzzjoni: Double-check that all screws are fully tightened. Ensure the rack is placed on a completely flat and level surface. Distribute items evenly on the shelf to maintain balance.
  • Issue: Hooks do not stay in place or break easily.
    Soluzzjoni: Ensure items hung on the hooks do not exceed the 250g weight limit per hook. The hooks are designed for lightweight utensils.

Speċifikazzjonijiet

KaratteristikaDettall
Isem tal-MudellExpandable Countertop Organizer
Numru tal-Mudell4480-P
Dimensjonijiet tal-Prodott (L x W x H)8.86"D x 21.26"W x 9.84"H (Minimum Width)
Expandable Width Range22.25" sa 36.25"
Piż tal-oġġett5.7 liri (2.58 kg)
Shelf Load-Bearing WeightSa 22 libbra (10 kg)
Hook Load-Bearing WeightUp to 250g per hook
MaterjaliAzzar miksi bit-trab
Numru ta' Xkafef1
Assemblea MeħtieġaIva
Komponenti InklużiWrench, 5 Hooks
Tip ta' InstallazzjoniCountertop or Undercounter

Informazzjoni dwar Garanzija

This product is sold without an explicit warranty. For details regarding returns or defects, please refer to the retailer's policy where the product was purchased.

Appoġġ għall-Klijent

For further assistance, questions, or concerns regarding your Yamazaki Home Tower Expandable Support Rack, please contact Yamazaki Home customer service through their official webis-sit jew il-bejjiegħ bl-imnut li mingħandu xtrajt il-prodott.

Dokumenti Relatati - 4480-P

Preview Istruzzjonijiet tal-Assemblaġġ tal-Kxaxen Two-Way u l-Ixkaffa Pull-Out tat-Torri Yamazaki
Istruzzjonijiet dettaljati tal-assemblaġġ u speċifikazzjonijiet għall-Yamazaki Tower Two-Way Drawer & Pull-Out Shelf. Tgħallem kif tinstalla u tuża dan l-organizzatur tal-kċina.
Preview Istruzzjonijiet tal-Assemblaġġ tal-Xtilliera taż-Żraben b'5 Livelli Yamazaki Tower
Gwida għall-assemblaġġ pass pass għall-Yamazaki Tower Rolling 5-Tier Shoe Rack b'wiċċ tal-injam, inkluża lista tal-partijiet u dijagrammi tal-assemblaġġ.
Preview Istruzzjonijiet tal-Assemblaġġ tal-Ganċ tal-Kowtijiet Tower - Yamazaki ZK-313
Gwida tal-assemblaġġ pass pass għall-Yamazaki Tower Coat Hanger (mudell ZK-313). Tinkludi lista tal-partijiet, struzzjonijiet tat-twaħħil, twissijiet, u pariri dwar il-kura.
Preview Yamazaki Over-the-door Hook Hanger Ply: Gwida għall-Installazzjoni u l-Użu
Istruzzjonijiet u speċifikazzjonijiet dettaljati għall-Yamazaki Over-the-door Hook Hanger Ply, inkluż kif twaħħlu mal-bibien u l-ħitan, materjali kompatibbli, u limiti tal-piż.
Preview Istruzzjonijiet tal-Assemblaġġ tar-Rack tar-Rekords tat-Torri tad-Dar Yamazaki
Gwida għall-assemblaġġ u speċifikazzjonijiet għall-Yamazaki Home Tower Record Rack (Mudell 10229:WH, 10230:BK), li jinkludi kostruzzjoni tal-azzar durabbli u roti tan-najlon għal mobilità faċli.