Audiolab M-ONE Integrated AmpManwal ta 'l-Utent aktar ħaj

1. Introduzzjoni

Grazzi tax-xiriasing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.

This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.

2. Informazzjoni dwar is-Sigurtà

Please observe the following safety precautions to prevent electric shock, fire, or damage to the unit:

• Sors tal-Enerġija: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage hija korretta għar-reġjun tiegħek.
• Ventilazzjoni: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
• Ilma u Umdità: Tesponix l-unità għax-xita, umdità, taqtir, jew titjir tal-ilma. Tpoġġix oġġetti mimlija b'likwidi, bħal vażuni, fuq l-unità.
• Sħana: Tpoġġix l-unità ħdejn sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Oġġetti Barranin: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
• Servizzi: Tippruvax isservi dan il-prodott int stess. Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.
• Tindif: Unplug the unit from the wall outlet before cleaning. Use a soft, dry cloth only. Do not use liquid or aerosol cleaners.

3. Kontenut tal-Pakkett

Carefully unpack the unit. The carton should contain:

• Audiolab M-ONE Integrated Ampaktar ħaj
• Kejbil tal-Enerġija AC
• Kontroll mill-bogħod
• Cable USB
• Manwal għall-Utent (dan id-dokument)

Jekk xi oġġett ikun nieqes jew bil-ħsara, jekk jogħġbok ikkuntattja lin-negozjant tiegħek immedjatament.

4. Prodott Aktarview

4.1 Panel ta 'Quddiem

Figura 4.1: Quddiem view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.

1. Ħruġ tal-headphones: Jack 6.3mm għall-konnessjoni tal-headphones.
2. SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
3. Display OLED: Shows current input, volume level, and menu information.
4. Manku tal-VOL (Volum): Rotates to adjust volume level. Press to mute/unmute.
5. Buttuna tal-Qawwa: Press to turn the unit on or off (standby mode).
6. M-ONE Indicator: LED light indicating power status.

4.2 Panel ta 'wara

Figura 4.2: Wara view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).

1. Swiċċ tal-Enerġija: Main power ON/OFF switch.
2. Dħul tal-Enerġija AC: Connects to the supplied AC power cable.
3. Terminals tal-Ispeaker: Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
4. Inputs Diġitali:
   • KOAXJALI: Digital coaxial input.
   • OTTIKU: Digital optical (Toslink) input.
   • USB B: USB Type B input for connecting to a computer.
5. Analog Inputs (AUX): RCA stereo inputs for analog sources.
6. Trigger 12V: For synchronized power control with other compatible components.

5. Setup

5.1 Tqegħid

Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.

5.2 Konnessjoni tal-Ispeaker

Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.

Attenzjoni:

• Ensure the M-ONE is powered off before making any speaker connections.
• Do not short-circuit the speaker terminals.

5.3 Source Connection

Connect your audio sources to the appropriate inputs on the rear panel:

• Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
• Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.

5.4 Konnessjoni tal-Enerġija

Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.

6. Istruzzjonijiet Operattivi

6.1 Power On/Off

First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.

6.2 Għażla tal-Input

Dawwar il- SEL knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the SEL pum biex tikkonferma l-għażla tiegħek.

6.3 Kontroll tal-Volum

Dawwar il- VOL knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the VOL knob to mute or unmute the audio output.

6.4 Tqabbil tal-Bluetooth

Biex tikkonnettja apparat Bluetooth:

1. Select the 'BT' input using the SEL knob. The display will show "BT Pairing".
2. Fuq l-apparat mobbli tiegħek (smartphone, tablet, eċċ.), attiva l-Bluetooth u fittex apparati disponibbli.
3. Select "Audiolab M-ONE" from the list of devices.
4. Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.

6.5 DAC Functionality

The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.

6.6 Output tal-headphones

Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.

6.7 Navigazzjoni tal-Menù u Settings

The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the SEL knob to enter the main menu. Use the SEL knob to navigate through options and the VOL knob to change values. Press SEL to confirm or exit a submenu. Available settings may include:

• Filtri Diġitali: Select different digital filter characteristics for the DAC.
• Il-luminożità tal-wiri: Aġġusta l-luminożità tal-wiri OLED.
• Standby Timer: Set a timer for automatic standby.
• Volume on Power On: Configure the initial volume level when the unit powers on.

7. Manutenzjoni

To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:

• Tindif: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
• Ventilazzjoni: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
• Konnessjonijiet: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
• Ħażna: If storing the unit for an extended period, disconnect it from the power supply and store it in a cool, dry place, preferably in its original packaging.

8 Issolvi l-problemi

If you experience issues with your M-ONE, consult the following table before contacting service personnel:

9. Speċifikazzjonijiet

The following specifications are typical for the Audiolab M-ONE:

• Qawwa tal-Ħruġ: 80 watts per channel (into 8 ohms)
• Inputs Diġitali: Coaxial, Optical, USB Type B
• Input Analog: RCA (AUX)
• Konnettività Wireless: Bluetooth
• DAC: DSD compatible
• Dimensjonijiet (L x W x H): 13.7 x 11.5 x 4.4 pulzieri (34.8 x 29.2 x 11.2 ċm)
• Piż: 16.58 Lira (7.52 kg)
• Voltage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
• Manifattur: Audiolab
• Numru tal-Mudell: M-ONE

Nota: L-ispeċifikazzjonijiet huma soġġetti għal bidla mingħajr avviż.

10. Garanzija u Appoġġ

Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab websit għal informazzjoni ta' kuntatt.

Websit: www.audiolab.co.uk