Fire Barrier Restraining Collar Instruction Manual

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of the Sti Fire Barrier Restraining Collar, Model SSWRC2. This metal restraining collar is designed to be used in conjunction with the SSWRED2 system to enhance fire barrier integrity.

Figure 1: Sti Fire Barrier Restraining Collar (SSWRC2) in coiled form. This image shows the metallic, flexible collar material, which features a serrated edge and pre-drilled holes for attachment, indicating its design for firestopping applications.

2. Informazzjoni dwar is-Sigurtà

Always adhere to local building codes, fire safety regulations, and manufacturer guidelines during installation. Improper installation can compromise fire safety and may lead to serious injury or property damage.

• Wear appropriate personal protective equipment (PPE), including gloves and eye protection, during handling and installation.
• Ensure the installation area is clear of obstructions and hazards.
• Consult with a qualified fire safety professional if you have any doubts regarding the application or installation process.
• Do not modify the product. Use only as intended and specified by the manufacturer.

3. Prodott Aktarview

The Sti Fire Barrier Restraining Collar (SSWRC2) is a flexible metal strip designed to provide structural support and enhance the firestopping capabilities of penetrations when used with the SSWRED2 system. Its serrated edges and pre-drilled holes facilitate secure attachment and conformity around various pipe or conduit sizes.

3.1 Komponenti

• SSWRC2 Restraining Collar: A 25-foot (7.6 meter) long metal strip.
• Nota: Fasteners for attachment (e.g., screws, anchors) are typically supplied separately or as part of the SSWRED2 system.

4. Istruzzjonijiet ta 'installazzjoni

This collar is intended for use with the SSWRED2 system. Refer to the SSWRED2 system's specific installation guide for detailed instructions on its application. The following steps outline the general procedure for integrating the SSWRC2 collar.

1. Prepare the Penetration: Ensure the opening in the fire-rated assembly (wall or floor) is clean and properly sized for the penetrating item (pipe, conduit, etc.).
2. Apply SSWRED2 Material: Install the SSWRED2 firestop material around the penetrating item according to its specific instructions.
3. Measure and Cut Collar: Measure the circumference of the penetrating item or the required length to encircle the SSWRED2 material. Cut the SSWRC2 collar to the appropriate length using suitable metal shears.
4. Form the Collar: Wrap the cut length of the SSWRC2 collar around the SSWRED2 material, ensuring a snug fit. The serrated edge should face outwards or as specified by the SSWRED2 system's instructions.
5. Secure the Collar: Overlap the ends of the collar and secure them together using appropriate fasteners through the pre-drilled holes. Ensure the collar is tightly secured around the firestop material to provide adequate restraint.
6. Attach to Structure: Secure the collar to the fire-rated assembly (wall or floor) using suitable fasteners through the remaining pre-drilled holes. The number and type of fasteners should comply with the SSWRED2 system's listing and local building codes.
7. Spezzjona l-Installazzjoni: Visually inspect the installed collar to ensure it is securely fastened, properly formed, and provides continuous restraint around the firestop material.

5. Operazzjoni u Funzjoni

The SSWRC2 Fire Barrier Restraining Collar does not have active operational components. Its function is passive and structural. When installed correctly with the SSWRED2 system, it provides mechanical restraint to the firestop material, preventing its displacement during a fire event. This ensures the firestop system maintains its integrity and prevents the passage of flame and smoke through the penetration.

6. Manutenzjoni

The Sti Fire Barrier Restraining Collar requires minimal maintenance once installed. Periodic inspections are recommended as part of a building's overall fire safety maintenance plan.

• Spezzjoni Annwali: Visually inspect the installed collar and surrounding firestop system annually, or as required by local regulations.
• Iċċekkja għal Ħsara: Look for any signs of corrosion, deformation, or loosening of fasteners.
• Repair/Replace: If any damage or loosening is observed, consult a qualified fire safety professional for repair or replacement of the affected components to ensure continued fire barrier integrity.
• Żomm ċar: Ensure the area around the firestop penetration remains clear of obstructions.

7 Issolvi l-problemi

As a passive component, the SSWRC2 collar does not typically experience "malfunctions." Troubleshooting primarily involves identifying improper installation or damage.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For specific warranty information and technical support regarding the Sti Fire Barrier Restraining Collar (SSWRC2) or the SSWRED2 system, please contact the manufacturer directly. Warranty terms typically cover manufacturing defects and are subject to proper installation and use as outlined in this manual and associated product documentation.

Kuntatt tal-manifattur: Refer to the official Sti webis-sit jew l-imballaġġ tal-prodott għall-aktar informazzjoni ta' kuntatt aġġornata.