Introduzzjoni
Thank you for choosing the Znewtech Home & Office Timer with Clock. This innovative digital timer is designed to enhance your time management and productivity, whether for work, study, or daily tasks. Its intuitive design allows for quick and easy setup and operation, featuring preset countdown times and a clear LCD display.
Il-karatteristiċi ewlenin jinkludu:
- A stylish and innovative digital desk timer with clock functionality.
- Simple operation: turn the timer to its desired preset position to start a countdown.
- Clear LCD screen displaying the remaining countdown time.
- Adjustable volume control with three levels: High, Low, and Silent.
- Flashing backlit visual alert for discreet notifications.
Kontenut tal-Pakkett
Jekk jogħġbok kun żgur li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- 1 x Znewtech Home & Office Timer (Cyan)
- 1 x Manwal għall-Utent
Setup
Installazzjoni tal-batterija
The Znewtech Timer requires 2 AAA batteries (not included). To install:
- Sib il-kompartiment tal-batterija fuq wara tat-tajmer.
- Iftaħ l-għatu tal-batterija bil-mod billi tiżżerżaq.
- Daħħal żewġ batteriji AAA, waqt li tiżgura l-polarità korretta (+/-) kif indikat ġewwa l-kompartiment.
- Agħlaq l-għatu tal-batterija sew.
Immaġni: Wara view of the timer, highlighting the battery compartment and control buttons for setup.
L-issettjar tal-Arloġġ
After installing batteries, the clock display will activate. To set the time:
- Agħfas il- SET button on the back of the timer to enter time setting mode. The hour digits will flash.
- Uża l- UP u 'L isfel buttuni biex taġġusta s-siegħa.
- Agħfas SET Agħfas mill-ġdid biex tmur għall-issettjar tal-minuti. Iċ-ċifri tal-minuti se jteptpu.
- Uża l- UP u 'L isfel buttuni biex jaġġustaw il-minuti.
- Agħfas SET darba oħra biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.
- Biex taqleb bejn il-format ta' 12-il siegħa u ta' 24 siegħa, agħfas il-buttuna MODALITÀ button while in clock display mode.
Istruzzjonijiet Operattivi
Using Preset Countdown Timers
The Znewtech Timer features five preset countdown durations: 5, 15, 30, 45, and 60 minutes. To activate a timer:
- Ensure the timer is in clock display mode.
- Simply rotate the timer so that the desired preset time (e.g., "5 min", "15 min") is facing upwards. The countdown will begin automatically.
- The LCD screen will display the remaining time.
- When the countdown reaches zero, the alarm will sound, and the backlight will flash (if enabled).
- To stop the alarm, simply rotate the timer to a different side or press the "SNOOZE/LIGHT" button on top.
Immaġni: Quddiem view of the timer, illustrating the preset time markings on each side.
Image: The timer in use on a desk, demonstrating its practical application.
Mod tal-Arloġġ
To return the timer to clock display mode, rotate it so the side marked "Clock" (indicated by a square icon) is facing upwards. The current time will be displayed.
Aġġusta tal-Volum
The timer offers three volume settings: High, Low, and Silent. To adjust the volume:
- Locate the volume control button/switch on the back of the timer (often labeled with a speaker icon).
- Press or slide to cycle through the available volume levels.
- In Silent mode, the timer will rely solely on the flashing backlit visual alert.
Funzjoni Snooze/Dawl
Press the "SNOOZE/LIGHT" button located on the top of the timer to temporarily silence an active alarm or to illuminate the display backlight for a few seconds in low-light conditions.
Image: The timer's backlit display, visible in a dark environment.
Manutenzjoni
To ensure the longevity and optimal performance of your Znewtech Timer:
- Tindif: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse it in water.
- Sostituzzjoni tal-batterija: Replace batteries promptly when the display becomes dim or the timer functions erratically. Always use fresh AAA batteries.
- Ħażna: Aħżen it-tajmer f'post frisk u niexef meta ma jkunx qed jintuża għal perjodi twal.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Timer not starting/Display blank | Low or dead batteries; Incorrect battery installation. | Replace batteries with new AAA batteries. Ensure correct polarity. |
| L-allarm ma jiddoqqx | Volume set to Silent; Speaker obstructed. | Check volume setting and adjust to High or Low. Ensure speaker on back is clear. |
| LCD display appears dim or blurry when inverted (e.g., 30 min side up) | Viewing angle sensitivity of LCD. | Aġġusta tiegħek viewing angle or position the timer at eye level for optimal clarity. |
| Timer does not register rotation for 5-minute setting | Internal mechanism needs slight adjustment. | Gently shake the timer or rotate it slightly to ensure the internal mechanism engages. |
| Clock time resets unexpectedly | Batteries jostled or briefly disconnected. | Re-set the clock time. Ensure batteries are firmly seated in the compartment. Avoid strong impacts. |
Speċifikazzjonijiet
| Numru tal-Mudell | ZNT-ZT-X1C |
| Brand | Znewtech |
| Kulur | Ċjan |
| Materjal | Plastik |
| Dimensjonijiet tal-Prodott (P x W x H) | 1.5" x 4.75" x 4.25" |
| Piż tal-oġġett | 322 Gram (11.4 uqija) |
| Number of Preset Settings | 5 (5, 15, 30, 45, 60 minutes) |
| Sors tal-Enerġija | 2 x Batteriji AAA (mhux inklużi) |
| UPC | 742567526554 |
| Pajjiż ta' Oriġini | Iċ-Ċina |
Garanzija u Appoġġ
The Znewtech Home & Office Timer comes with a Garanzija ta' Sena mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura u xogħol taħt użu normali.
For warranty claims, technical support, or any questions regarding your product, please contact Znewtech customer service through the retailer's platform or visit the official Znewtech store on Amazon: Znewtech Store.
Please have your model number (ZNT-ZT-X1C) and proof of purchase ready when contacting support.
