Manwal tal-Utent tal-Kaxxa tal-Logħob tal-PC Aerocool Bolt Mid-Tower RGB

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aerocool Bolt Mid-Tower RGB PC Gaming Case. Please read this manual thoroughly before beginning assembly or operation to ensure proper usage and to maximize the lifespan of your product.

Figura 1: Quddiem-xellug view of the Aerocool Bolt Mid-Tower RGB PC Gaming Case, showcasing the full acrylic side panel and the RGB LED strip on the front panel.

Karatteristiċi Ewlenin

• Mid-Tower ATX form factor.
• Stylish RGB LED strip on the front panel with 13 lighting modes (6 RGB flow, 7 static colors).
• Full acrylic side panel for component visibility.
• Carbon fiber style front panel finish.
• Jappoġġja motherboards ATX, Micro-ATX, u Mini-ITX.
• Liquid cooling support up to 240mm.
• Up to six 120mm fans (one 120mm black fan included at the rear).
• Dual chamber design for improved cooling.
• Front I/O panel with USB 3.0 and USB 2.0 ports.

Setup u Installazzjoni

Before beginning installation, ensure your workspace is clean and static-free. Refer to your component manuals for specific installation instructions.

1. Tħejjija tal-Każ

1. Neħħi l-Panewijiet tal-Ġnub: Carefully unscrew the thumbscrews on the rear of the case for both the acrylic side panel and the solid metal side panel. Gently slide the panels backward and lift them off.
2. Kaxxa tal-Aċċessorji: Locate the accessory box inside the case, which contains screws, cable ties, and other mounting hardware.

Figura 2: Ġenb view of the case, highlighting the full acrylic side panel. This panel provides a clear view tal-komponenti interni.

2. Installazzjoni tal-Motherboard

1. Installa Standoffs: Ensure the correct standoffs are installed for your motherboard size (ATX, Micro-ATX, or Mini-ITX). The case comes with pre-installed standoffs for ATX. Adjust as necessary.
2. Installa l-I/O Shield: Snap your motherboard's I/O shield into the rear opening of the case.
3. Immuntar tal-Motherboard: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure it with the provided screws.

Figura 3: Intern view of the case, illustrating the motherboard mounting area, cable management cutouts, and drive bays.

3. Installazzjoni tal-Unità tal-Provvista tal-Enerġija (PSU)

• The PSU mounts at the bottom rear of the case. Slide your PSU into the dedicated compartment from the rear.
• Waħħal il-PSU bil-viti minn barra l-kaxxa.
• Route necessary cables through the cutouts into the main chamber for component connection.

4. Installazzjoni tad-Drajv tal-Ħażna

• HDDs ta' 3.5": Install 3.5" hard drives into the drive cage located beneath the PSU shroud. Slide them in and secure with screws.
• SSDs ta' 2.5": Mount 2.5" SSDs to the dedicated mounting points on the motherboard tray or the PSU shroud. Secure with screws.

5. Installazzjoni tal-Karta tal-Grafika (GPU)

• Neħħi l-għata meħtieġa tas-slott tal-PCIe minn wara tal-kaxxa.
• Daħħal il-karta grafika tiegħek fl-islott PCIe xieraq fuq il-motherboard.
• Secure the graphics card to the case with screws. The case supports high-end graphics cards up to 355mm in length.

6. Cooling System Installation (Fans & Liquid Cooling)

• Fannijiet: The case supports up to six 120mm fans. One 120mm fan is pre-installed at the rear. Additional fans can be installed at the front (up to 3x 120mm), top (up to 2x 120mm), and PSU shroud (2x 120mm for VGA cooling).
• Tkessiħ Likwidu: A 240mm radiator can be installed at the front of the case.
• Kun żgur li l-fluss tal-arja jiġi dirett sew għal tkessiħ ottimali.

Figura 4: Minn fuq 'il quddiem view of the case, displaying the power button, USB 3.0, USB 2.0 ports, and audio jacks.

7. Ġestjoni tal-Kejbil

• Uża l-qtugħ tal-immaniġġjar tal-kejbil u l-punti ta' rbit wara t-trej tal-motherboard biex tgħaddi u twaħħal il-kejbils. Dan itejjeb il-fluss tal-arja u l-estetika.
• Qabbad il-kejbils kollha meħtieġa tal-enerġija u tad-dejta mal-komponenti tiegħek.
• Connect the case's front panel connectors (USB, audio, power switch, reset switch, LED switch) to the appropriate headers on your motherboard.

Istruzzjonijiet Operattivi

RGB LED Lighting Control

The Aerocool Bolt case features an integrated RGB LED strip on the front panel with multiple lighting modes. Control is managed via a dedicated LED control switch located on the top I/O panel.

• Qawwa Mixgħul: After connecting the case's RGB cable to your power supply (usually via a SATA power connector), the RGB strip will illuminate upon system startup.
• Ibdel il-Modi: Press the LED control switch (often labeled "LED" or a lightbulb icon) on the top panel to cycle through the 13 available lighting modes. These include 6 RGB flow effects and 7 static color modes.
• Turn Off/On: Press and hold the LED control switch for a few seconds to turn the RGB lighting off. Press it again briefly to turn it back on.

Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura prestazzjoni ottimali u lonġevità tal-kaxxa tal-PC tiegħek.

• Tindif tat-Trab: Naddaf il-filtri tat-trab (jekk preżenti) u l-komponenti interni perjodikament bl-użu ta' arja kkompressata. Kun żgur li s-sistema tkun mitfija u skonnettjata qabel ma tnaddaf.
• Acrylic Side Panel: Clean the acrylic side panel with a soft, lint-free cloth and a mild, non-abrasive cleaner specifically designed for plastics. Avoid harsh chemicals or abrasive materials, as they can scratch the surface.
• Ġestjoni tal-Kejbil: Iċċekkja r-rotta tal-kejbil perjodikament biex tiżgura li l-ebda kejbil ma jkun qed jostakola l-fluss tal-arja jew ix-xfafar tal-fann.

Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista’ tiltaqa’ magħhom.

• Ebda Qawwa:
  • Kun żgur li l-PSU huwa konness sew mas-sokit tal-ħajt u li s-swiċċ tal-enerġija fuq il-PSU huwa fil-pożizzjoni "ON".
  • Verify that the case's front panel power switch cable is correctly connected to the motherboard's power header.
• Dawl RGB Mhux Taħdim:
  • Check if the RGB LED strip's power cable (usually SATA) is securely connected to your power supply.
  • Ensure the LED control switch cable from the front panel is connected to the appropriate header on the RGB controller (if applicable) or directly to the LED strip.
  • Try pressing the LED control switch to cycle through modes or holding it down to turn it on/off.
• Fluss tal-Arja Fqir/Tisħin Żejjed:
  • Ensure all installed fans are spinning and oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
  • Clean any dust buildup on fans and filters.
  • Verify that cables are neatly managed and not obstructing airflow.
• Portijiet USB Mhux Jaħdmu:
  • Check if the USB 3.0 and USB 2.0 cables from the front panel are correctly connected to the corresponding headers on your motherboard.

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

AeroCool products typically come with a limited manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official AeroCool websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Appoġġ għall-Klijent

If you encounter issues not covered in this manual or require further assistance, please contact AeroCool customer support. Contact information can usually be found on the official AeroCool webis-sit jew fuq l-imballaġġ tal-prodott.

Websit: www.aerocool.io (Jekk jogħġbok ivverifika l-uffiċjal attwali websit għal appoġġ.)