Behringer NX6000D

Behringer NX6000D Power AmpManwal ta 'l-Utent aktar ħaj

Model: NX6000D

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.

2. Istruzzjonijiet Importanti dwar is-Sigurtà

  • Sors tal-Enerġija: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
  • Ventilazzjoni: Aċċerta ruħek li jkun hemm ventilazzjoni adegwata. Timblokkax il-fetħiet tal-ventilazzjoni.
  • Ilma u Umdità: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
  • Servizzi: Irreferi kull servizz lil persunal tas-servizz kwalifikat. Tippruvax tagħmel servizz ta' dan il-prodott int stess.
  • Kejbils: Use only high-quality, shielded cables for all audio connections to prevent interference.
  • L-ertjar: Dan il-prodott għandu jkun ertjat.
  • Tindif: Naddaf biss b'ċarruta niexfa.

3. Gwida ta' Setup

3.1 Spakkjar u Spezzjoni

Ippakkja b'attenzjoni l- amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.

3.2 Tqegħid

The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.

3.3 Konnessjonijiet

  1. Konnessjoni tal-Enerġija: Qabbad il-korda tal-enerġija AC fornuta mal- amplifier's power inlet and then to a suitable grounded power outlet.
  2. Konnessjonijiet tad-dħul: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
  3. Konnessjonijiet tal-Ħruġ: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Quddiem view of the Behringer NX6000D Power Ampaktar ħaj

Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.

Angolat view of the Behringer NX6000D Power Ampaktar ħaj

Figura 2: Angolat view of the Behringer NX6000D Power Amplifier, highlighting its compact design.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.

4.2 Kontrolli ta' Front Panel

  • Level Controls (CH A, CH B): Adjust the output level for each channel.
  • SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
  • Display LCD: Shows current settings, DSP parameters, and status.
  • Buttuna SETUP: Accesses the main setup menu.
  • PROCESS Button: Accesses DSP processing parameters.
  • Pum tal-Encoder: Jinnaviga l-menus u jaġġusta l-valuri tal-parametri.
  • Buttuna ĦRUĠ: Returns to the previous menu or main screen.

4.3 DSP Functionality

The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:

  • Dewmien: Adjust signal delay for speaker alignment.
  • crossover: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
  • EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
  • Dynamics Processing: Apply compression or limiting to control dynamic range.
  • Settings tas-Sigurtà: Lock settings to prevent unauthorized changes.

Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.

5. Manutenzjoni

  • Tindif: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Ventilazzjoni: Iċċekkja regolarment li l-fetħiet tal-ventilazzjoni jkunu ħielsa mit-trab u l-fdalijiet.
  • Konnessjonijiet tal-kejbil: Periodically check all cable connections for secure fit and signs of wear.
  • Ħażna: Jekk se taħżen l-unità għal perjodu estiż, kun żgur li tkun f'ambjent niexef u ħieles mit-trab.

6 Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Ebda qawwaPower cord disconnected; faulty outlet; internal fuse.Check power cord connection; try a different outlet; contact service if fuse is suspected.
Ebda output tal-ħossInput/output cables incorrect; level controls too low; protection mode active.Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit).
Ħoss distortInput signal too high; speaker impedance mismatch; faulty speaker.Reduce input signal level; verify speaker impedance matches amplifier; ittestja b'kelliema differenti.
L-unità tisħon iżżejjedVentilazzjoni mblukkata; tagħbija eċċessiva.Ensure clear airflow around the unit; reduce output level or load.

7. Speċifikazzjonijiet Tekniċi

  • Qawwa tal-Ħruġ: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
  • Piż: Less than 13.2 lbs / 6.0 kg
  • Dimensjonijiet (H x W x D): Madwar 3.7 x 19.02 x 12.44 pulzieri (94 x 483 x 316 mm)
  • DSP: High-performance DSP with 24-bit/96 kHz converters
  • Karatteristiċi DSP: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
  • Konnetturi tad-dħul: 2 x XLR/TRS combo jacks
  • Konnetturi tal-ħruġ: 2 x SpeakON connectors
  • Provvista tal-Enerġija: Ultra-efficient switch-mode power supply
  • Tkessiħ: Revolutionary cool-running high-density Class-D technology
  • Materjal: Metall
  • Kulur: Iswed

8. Garanzija u Appoġġ

For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.

8.1 Appoġġ Tekniku

If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.

Uffiċjali ta' Behringer Websit: www.behringer.com

Dokumenti Relatati - NX6000D

Preview Behringer NX Series Power Amplifiers: Gwida ta' Bidu Mgħaġġel
Gwida komprensiva ta' bidu rapidu għal Behringer NX6000, NX3000, NX1000, NX4-6000, NX6000D, NX3000D, NX1000D Class-D power amplifers, li jkopru s-sigurtà, il-konnessjoni, il-kontrolli, kif tibda, bi-amping, u speċifikazzjonijiet.
Preview Behringer NX Series Power AmpGwida ta' Bidu Mgħaġġel għall-Lifiers
Ibda malajr bil-Behringer NX Series Ultra-Lightweight Class-D Power tiegħek Ampkwalifikaturi. Din il-gwida tkopri s-setup, il-kontrolli u l-bi- essenzjaliampGħall-mudelli NX6000, NX3000, NX1000, NX4-6000, u l-varjanti DSP tagħhom NX6000D, NX3000D, NX1000D, li jinkludu t-teknoloġija SmartSense.
Preview Behringer NX Series Power Amplifiers: Gwida ta' Bidu Mgħaġġel
Ibda malajr bil-Behringer NX Series Ultra-Lightweight Class-D Power Ampmodifikaturi. Din il-gwida tkopri l-mudelli NX6000, NX3000, NX1000, NX4-6000, u l-kontropartijiet tagħhom li jaħdmu bid-DSP (NX6000D, NX3000D, NX1000D), billi tagħti dettalji dwar is-setup, il-kontrolli, u l-bi-amping konfigurazzjonijiet.
Preview Behringer NX Series Power AmpGwida ta' Bidu Mgħaġġel għall-Lifiers
Gwida ta' bidu rapidu għall-power tal-Klassi D Behringer NX6000, NX3000, NX1000, NX4-6000, NX6000D, NX3000D, u NX1000D ampiffurmaturi. Tkopri struzzjonijiet ta' sigurtà, kontrolli, dijagrammi ta' konnessjoni, bi-ampproċeduri ta' installazzjoni, u speċifikazzjonijiet dettaljati.
Preview Serje BEHRINGER iNUKE: PA DSP ta' Qawwa Għolja u Ħafifa Ampliifikaturi
Skopri s-serje BEHRINGER iNUKE ta' PA ultra-ħfief u ta' densità għolja amplifiers. B'teknoloġija avvanzata tal-Klassi-D, kontroll komprensiv tad-DSP, u output ta' qawwa sostanzjali, dawn ampIl-lifiers huma ddisinjati għal applikazzjonijiet awdjo professjonali, u joffru prestazzjoni u portabbiltà superjuri.
Preview Behringer iNUKE NU6000DSP/NU3000DSP/NU1000DSP User Manual: Power AmpGwida lifier
Comprehensive user manual for the Behringer iNUKE NU6000DSP, NU3000DSP, and NU1000DSP ultra-lightweight, high-density power amplifiers. Covers setup, control elements, DSP processor functions, software control, applications, installation, and specifications.