maXpeedingrods HY45 Coilovers Instruction Manual

1. Introduzzjoni

This manual provides essential information for the installation, adjustment, and maintenance of your maXpeedingrods HY45 Height Adjustable Coilovers. These coilovers are designed to enhance the performance and aesthetics of your BMW 3 Series by allowing precise control over ride height and improving handling characteristics. Please read this manual thoroughly before beginning any installation or adjustment procedures.

2. Informazzjoni dwar is-Sigurtà

WARNING: Improper installation or adjustment of suspension components can lead to serious injury or death. Professional installation is highly recommended.

• Dejjem ilbes tagħmir protettiv personali xieraq, inklużi nuċċalijiet u ingwanti tas-sigurtà.
• Kun żgur li l-vettura hija appoġġjata sew fuq stands tal-ġakk jew lift qabel ma taħdem taħtha. Qatt ma tiddependi biss fuq ġakk.
• Use appropriate tools for all steps. Do not use damaged or incorrect tools.
• Do not modify any components of the coilover kit.
• After installation, ensure all fasteners are torqued to manufacturer specifications.
• A professional wheel alignment is mandatory after any suspension component replacement or ride height adjustment.

3. Prodott Aktarview u l-Kontenut tal-Pakkett

Your maXpeedingrods HY45 Coilover Kit includes the following components:

• 2 x Front Coilover Assemblies
• 2 x Rear Coilover Assemblies (shocks and springs)
• 1 x Pair of Adjustment Wrenches

Note: Top mounts are not included and must be reused from your original suspension or purchased separately.

Image: All components of the maXpeedingrods HY45 Coilover Kit, including front and rear coilover assemblies and adjustment wrenches.

Immaġni: Dettaljata view highlighting the 55CrSi steel springs, durable TPV dust boots, and sturdy lower brackets, key features of the coilover design.

4. Speċifikazzjonijiet

Image: Illustration detailing the high-tensile 55CrSi springs and their specific front and rear spring rates.

5. Kompatibilità tal-Vettura

Mudelli Kompatibbli:

• BMW 3 Series E90 (Sedan) 2005-2013
• BMW 3 Series E91 (Wagon) 2005-2013
• BMW 3 Series E92 (Coupe) 2005-2013
• BMW 3 Series E93 (Convertible) 2005-2013

Mudelli Inkompatibbli:

• BMW 325i E92 Coupe
• BMW 335i E92 Coupe
• BMW E93 330d
• BMW 320d, 318d
• All M3 models
• All-wheel drive (AWD) models

Important: Please verify your vehicle's front strut diameter is 50mm before purchase. This kit is not compatible with 52mm struts.

6. Gwida għall-Installazzjoni

The installation of coilovers requires specialized tools and automotive knowledge. It is strongly recommended that installation be performed by a qualified professional technician.

Passi Ġenerali ta' Installazzjoni (Installazzjoni Professjonali Rakkomandata):

1. Preparazzjoni: Park the vehicle on a level surface. Engage the parking brake. Gather all necessary tools and safety equipment.
2. Vehicle Lift and Wheel Removal: Safely lift the vehicle using a hydraulic lift or jack stands. Remove the wheels.
3. OEM Suspension Removal: Carefully disconnect and remove the original shock absorbers and springs. This typically involves detaching brake lines, ABS sensors, sway bar links, and unbolting the top mount and lower strut/shock mounts.
4. Coilover Assembly (if required): If your kit requires reusing OEM top mounts, transfer them to the new coilover assemblies. Ensure all components are correctly oriented and secured.
5. Coilover Installation: Install the new coilover assemblies into the vehicle. Secure the top mounts and lower mounts. Reattach all disconnected components (brake lines, ABS sensors, sway bar links). Ensure no lines or wires are pinched.
6. Aġġustament tal-Għoli Inizjali: Before lowering the vehicle, perform an initial height adjustment. Refer to Section 7 for detailed adjustment instructions.
7. Kontrolli Finali: Lower the vehicle carefully. Torque all fasteners to the vehicle manufacturer's specifications. Reinstall wheels and torque lug nuts.
8. Wara l-Installazzjoni: Drive the vehicle for a short distance to allow the suspension to settle. Re-check all fasteners for tightness. A professional wheel alignment is crucial after installation to ensure proper handling and tire wear.

Image: An assembled front coilover unit and a separate rear shock absorber, illustrating the components before installation.

7. Aġġustament tal-Għoli

The maXpeedingrods HY45 Coilovers allow for adjustable ride height. Use the provided wrenches to make adjustments.

Proċedura ta' Aġġustament:

1. Lift Vehicle: Safely lift the vehicle to relieve pressure from the suspension.
2. Loosen Locking Collars: Use the larger wrench to loosen the locking collar located directly below the spring perch.
3. Adjust Spring Perch: Use the smaller wrench to turn the spring perch. Turning clockwise will lower the vehicle; turning counter-clockwise will raise it. Make small, even adjustments to both sides of the vehicle (front or rear) to maintain balance.
4. Tighten Locking Collars: Once the desired height is achieved, firmly tighten the locking collar against the spring perch using the wrenches. This prevents the perch from moving during operation.
5. Lower Vehicle and Settle: Carefully lower the vehicle and allow the suspension to settle by driving a short distance.
6. Measure and Fine-tune: Measure the ride height at all four corners. Repeat the adjustment process as needed until the desired and even ride height is achieved.
7. Allinjament tar-roti: After any significant height adjustment, a professional wheel alignment is absolutely necessary to ensure correct steering geometry and prevent premature tire wear.

Immaġni: Close-up view of the coilover's threaded body, spring perch, and locking collars, which are used for height adjustment.

8. Manutenzjoni

Regular inspection and maintenance will prolong the life and performance of your coilovers.

• Spezzjoni regolari: Periodically inspect the coilovers for any signs of damage, leaks, or corrosion. Check the dust boots for tears.
• Indafa: Keep the coilover threads and components clean from dirt, salt, and debris, especially in harsh weather conditions. This helps prevent corrosion and ensures smooth height adjustment.
• Torque tal-Qafliet: After the initial settling period and periodically thereafter, re-check the torque of all mounting bolts and locking collars.
• Allinjament: Maintain proper wheel alignment as recommended by your vehicle manufacturer, especially after any ride height changes.

9 Issolvi l-problemi

If you experience issues with your coilovers, consider the following common troubleshooting steps:

• Unusual Noises (Clunking/Rattling):
  • Check all mounting bolts and nuts for proper tightness.
  • Ensure locking collars are securely tightened against the spring perches.
  • Inspect for any loose components or contact between the coilover and other vehicle parts.
• Għoli tar-Rikba Irregolari:
  • Re-measure the ride height at all four corners.
  • Adjust the spring perches as described in Section 7 to achieve an even height.
  • Ensure the vehicle has been driven to allow the suspension to settle after adjustments.
• Poor Handling/Steering Issues:
  • Verify that a professional wheel alignment has been performed after installation or significant height changes.
  • Check tire pressures.
  • Ensure all suspension components are correctly installed and torqued.
• Leaking Shock Absorber:
  • A small amount of oil residue can be normal, but significant oil leakage indicates a faulty shock. Contact maXpeedingrods support.

If problems persist after performing these checks, please contact maXpeedingrods customer support for further assistance.

10. Garanzija u Appoġġ għall-Klijent

maXpeedingrods is committed to providing high-quality products and excellent customer service. For any questions, technical assistance, or warranty inquiries regarding your HY45 Coilovers, please contact maXpeedingrods customer support.

You can typically find contact information on the official maXpeedingrods website or through your purchase platform. Please have your product model number (HY45) and purchase details ready when contacting support.

Image: maXpeedingrods emphasizes easy installation, expert engineering support, and a customer-centric approach to service.