1. Prodott Aktarview
The Comfee MDDE-10DEN3 Dehumidifier is designed to efficiently remove excess moisture from indoor air, creating a more comfortable and healthier environment. It is suitable for rooms up to approximately 40 cubic meters. This unit features a clearly designed control panel for easy operation, a 2-liter water tank, and includes essential protections such as frost and overflow protection. It utilizes R290 refrigerant for effective dehumidification.

Figura 1: Quddiem view of the Comfee MDDE-10DEN3 Dehumidifier. This image shows the compact design of the unit, with the air intake grille visible on the front and the water level indicator on the side.
2. Istruzzjonijiet tas-Sigurtà
Please read all safety instructions carefully before operating the dehumidifier to prevent injury or damage. Keep this manual for future reference.
- Żgura li l-provvista tal-enerġija taqbel mal-voltage speċifikat fuq it-tikketta tal-klassifikazzjoni tal-unità.
- Tħaddimx id-dehumidifikatur b'korda jew plagg bil-ħsara.
- Do not block the air inlet or outlet. Maintain at least 20 cm (8 inches) clearance around the unit.
- Tużax l-apparat fl-imxarrab jew damp environments, such as bathrooms or laundry rooms, where it may come into contact with water.
- Dejjem aqla’ l-unità qabel ma tnaddafha jew tagħmel xi manutenzjoni.
- Żomm l-unità wieqfa waqt it-trasport u t-tħaddim.
- This appliance uses R290 refrigerant, which is flammable. Do not puncture the refrigerant circuit.
- Tippruvax issewwi jew timmodifika l-unità int stess. Ikkuntattja persunal tas-servizz kwalifikat għat-tiswijiet.
- Żomm fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
3. Komponenti tal-Prodott
Familiarize yourself with the main parts of your Comfee MDDE-10DEN3 Dehumidifier:
- Panel tal-Kontroll: Located on the top of the unit, used for setting operation modes and humidity levels.
- Grilja tad-Dħul tal-Arja: Where air is drawn into the unit for dehumidification.
- Żbokk tal-Arja: Fejn titkeċċa arja niexfa.
- Tank tal-Ilma: Collects condensed water. Features a water level indicator.
- Manku: Għal portabbiltà faċli.
- Korda tal-Enerġija: Jgħaqqad l-unità ma' sokit elettriku.

Figura 2: Close-up view of the Comfee MDDE-10DEN3 Dehumidifier control panel. This image displays the various buttons and indicator lights, including power, humidity settings (40%, 50%, 60%), and defrost indicators.
4. Setup
- Spakkjar: Neħħi d-deumidifikatur mill-imballaġġ tiegħu bir-reqqa. Żomm l-imballaġġ għal ħażna jew trasport fil-futur.
- Pjazzament: Place the unit on a firm, level surface in the desired room. Ensure there is at least 20 cm (8 inches) of free space around all sides of the unit for proper air circulation. Do not place it near heat sources or in direct sunlight.
- Konnessjoni tal-Enerġija: Ipplaggja l-korda tal-enerġija f'sokit elettriku ertjat. Kun żgur li s-sokit jissodisfa r-rekwiżiti tal-enerġija tal-unità.
- Tank tal-Ilma: Kun żgur li t-tank tal-ilma jkun imdaħħal sew fl-unità.
5. Istruzzjonijiet Operattivi
The control panel allows you to manage the dehumidifier's functions.

Figura 3: Dettaljati view of the control panel for operation reference.
- Buttuna tal-Qawwa (①): Agħfas biex tixgħel jew titfi l-unità.
- Buttuna tal-Issettjar tal-Umdità (②): Press to cycle through desired humidity levels: 40%, 50%, 60%. The corresponding indicator light will illuminate. The unit will operate until the set humidity level is reached.
- Operazzjoni Kontinwa: If no specific humidity level is set, the unit may operate continuously.
- Defrost Indicator (③): Illuminates when the unit is in defrost mode, which occurs automatically when coil temperatures are too low. The dehumidification process will pause during defrosting.
- Full Water Tank Indicator (④): Illuminates when the water tank is full or incorrectly inserted. The unit will stop operating until the tank is emptied and reinserted correctly.
- Funzjoni ta' Ristartja Awtomatika: F'każ ta' qawwa outage, the unit will automatically restart with the previously set humidity level once power is restored.
Drenaġġ Kontinwu (Mhux obbligatorju)
For continuous operation without needing to empty the water tank, a drainage hose (not included) can be connected to the continuous drainage port on the back of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable receptacle.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tad-deumidifikatur tiegħek.
- Tbattil tat-Tank tal-Ilma: When the "Full Water Tank" indicator illuminates, carefully pull out the water tank, empty the collected water, and reinsert it firmly until it clicks into place.
- Tindif tal-Filtru tal-Arja: Il-filtru tal-arja għandu jitnaddaf kull ġimagħtejn jew aktar ta' spiss skont l-użu.
- Itfi l-unità u aqlagħha mill-plagg tal-elettriku.
- Remove the air filter from the back or side of the unit (refer to diagram in full manual if available).
- Aħsel il-filtru b'ilma sħun u bis-sapun. Laħlaħ sew u ħallih jinxef kompletament bl-arja qabel ma terġa' ddaħħalh.
- Tħaddimx id-deumidifikatur mingħajr il-filtru.
- Tindif tal-Estern tal-Unità: Imsaħ il-barra b'artab, damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
- Ħażna: If storing the unit for an extended period, ensure the water tank is empty and clean, and the filter is clean and dry. Store the unit upright in a cool, dry place.
7 Issolvi l-problemi
Irreferi għat-tabella li ġejja għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma tixgħel. | No power; power cord loose; water tank full or not properly inserted. | Check power outlet and cord connection. Empty and reinsert water tank correctly. |
| Ma nġabar l-ebda ilma. | Humidity level set too high; room temperature too low; air filter clogged; continuous drainage hose connected and draining. | Lower desired humidity setting. Ensure room temperature is above 5°C (41°F). Clean air filter. Check continuous drainage setup. |
| Unit runs constantly. | Humidity level not reached; unit set to continuous operation. | Allow more time for dehumidification. Set a specific humidity level if continuous operation is not desired. |
| Defrost indicator is on. | Coils are frosting up due to low ambient temperature. | This is normal operation. The unit will automatically defrost and resume dehumidification. |
If the problem persists after trying these solutions, please contact Comfee customer support.
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | MDDE-10DEN3 |
| Brand | Comfee |
| Kapaċità ta 'Deumidifikazzjoni | 10 Liters/24 hours |
| Kapaċità tat-Tank tal-Ilma | 2 Litri |
| Daqs tal-Kamra Rakkomandat | Up to approximately 40 m³ |
| Refriġerant | R290 |
| Dimensjonijiet (Pakkett) | 44.8 x 36.3 x 34 ċm |
| Piż tal-oġġett | 11 Kilogrammi |
| Kulur | Abjad/Griż |
| Modalità Operattiva | Awtomatiku |
9. Garanzija u Appoġġ
Specific warranty information for your Comfee MDDE-10DEN3 Dehumidifier is typically provided with your purchase documentation or on the manufacturer's official websit. Jekk jogħġbok irreferi għal dawn ir-riżorsi għal dettalji dwar il-kopertura tal-garanzija, it-termini u l-kundizzjonijiet.
For technical support, service, or inquiries about replacement parts, please contact Comfee customer service. Contact information can usually be found on the Comfee webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.
You can visit the official Comfee store for more information: Comfee Store





