BORUIT RJ-3000 Rechargeable LED Headlamp Manwal għall-Utent

1. Prodott Aktarview

The BORUIT RJ-3000 is a versatile and durable rechargeable LED headlamp designed for various outdoor and indoor activities. It features multiple lighting modes, including a red light option, and is built to withstand challenging environments.

Image 1.1: The BORUIT RJ-3000 headlamp shown with its included accessories: two rechargeable batteries, a wall charger, a car charger, and a USB-C cable.

Karatteristiċi ewlenin:

• Modi tad-Dawl Multipli: Offers high white light (100%), medium white light (50%), and medium-colored light (50% red).
• Rikarikabbli: Equipped with USB-C charging for efficient power replenishment. Can also function as an emergency power bank.
• Disinn aġġustabbli: Features a 90° tilt adjustment for directing light precisely.
• Durabbli u Reżistenti għat-Temp: Constructed with a rugged aluminum alloy body and rated IPX5 waterproof, suitable for demanding conditions.

2. Kontenut tal-Pakkett

Kun żgur li l-oġġetti kollha huma preżenti meta tiftaħ il-kaxxa:

• BORUIT RJ-3000 Headlamp
• 2 x Batteriji Rechargeable
• Cable tal-Iċċarġjar tal-USB-C
• Ċarġer tal-ħajt
• Ċarġer tal-Karozza

3. Setup

3.1 Installazzjoni tal-batterija

1. Locate the battery compartment at the rear of the headlamp.
2. Iftaħ l-għatu tal-kompartiment.
3. Insert the two provided rechargeable batteries, ensuring correct polarity (+/-).
4. Agħlaq sewwa l-għatu tal-kompartiment tal-batterija.

3.2 Iċċarġjar inizjali

Qabel l-ewwel użu, iċċarġja r-ras kompletamentamp batteriji.

1. Connect the USB-C charging cable to the headlampIl-port tal-iċċarġjar ta'.
2. Connect the other end of the cable to the provided wall charger or car charger, then plug into a power source.
3. The charging indicator will illuminate (typically red) during charging and change color (e.g., green) when fully charged.

4. Istruzzjonijiet Operattivi

4.1 Mixgħul/Mitfi u Għażla tal-Modalità

Il-kapamp features a non-slip switch button for control.

1. Qawwa Mixgħul: Press the power button once to turn on the headlamp.
2. Modi taċ-ċiklu: Subsequent presses of the power button will cycle through the available light modes: High White Light (100%) → Medium White Light (50%) → Medium Red Light (50%).
3. Itfi: Press the power button after cycling through all modes, or hold the button for a few seconds to turn off directly from any mode.

Immaġni 4.1: Stampa dettaljata view tal-headlamp's non-slip switch button and visual examples of its three primary light modes: high white, low white, and red light.

Immaġni 4.2: Ir-rasamp operating in red light mode, illustrating its utility for activities such as beekeeping, fishing, and hunting, where preserving night vision or minimizing disturbance is crucial.

4.2 Aġġustament tal-Angolu

Il-kapamp unit can be tilted up to 90 degrees to direct the light beam.

1. Gently hold the headlamp unità.
2. Tilt it to the desired angle. The mechanism is designed to hold its position securely.

Image 4.3: A visual representation of the headlamp's 90-degree rotation capability, demonstrating how the light can be angled for various user needs, such as walking, running, or cycling.

5. Manutenzjoni

5.1 Tindif

• Imsaħ il-headlamp ġisem b'forma ratba, damp drapp.
• Tużax tindif jew solventi li joborxu.
• Ensure the charging port cover is securely closed to prevent water ingress during cleaning.

5.2 Ħażna

• Aħżen il-headlamp f'post frisk u niexef meta ma tkunx qed tintuża.
• For long-term storage, it is recommended to partially charge the batteries (around 50%) and recharge them every 3-6 months to maintain battery health.

Immaġni 5.1: Ir-rasamp undergoing a water spray test, confirming its IPX4 waterproof rating, which protects against splashes from any direction.

6 Issolvi l-problemi

• Kapamp ma jixgħelx:
  • Check if the batteries are correctly installed with the right polarity.
  • Ensure the batteries are charged. Connect to a power source and observe the charging indicator.
  • Verify that the battery compartment cover is fully closed.
• L-output tad-dawl huwa baxx:
  • The batteries may be low. Recharge the headlamp.
  • Kun żgur li l-lenti hija nadifa u ħielsa mill-ħmieġ jew mill-fdalijiet.
• Kapamp ma jiċċarġjax:
  • Check the USB-C cable and charger for damage. Try a different cable or power adapter.
  • Ensure the charging cable is fully inserted into the headlampIl-port ta'.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information or technical support, please refer to the product packaging or contact BORUIT customer service directly. Contact details are typically available on the official BORUIT webis-sit jew permezz tal-punt tax-xiri tiegħek.