1. Introduzzjoni
The Cecotec Conga 3090 is a professional 4-in-1 robot vacuum cleaner designed to sweep, vacuum, mop, and scrub your floors efficiently and intelligently. Featuring iTech Laser 360 navigation technology, it maps your home to plan the most effective cleaning routes. With its powerful turbine, it achieves up to 2000 Pa suction, ensuring thorough cleaning on various surfaces.
This manual provides essential information for the safe and effective use of your Conga 3090 robot vacuum cleaner. Please read it carefully before operating the device and retain it for future reference.
2. Informazzjoni Importanti dwar is-Sigurtà
Dejjem segwi l-prekawzjonijiet bażiċi ta' sigurtà meta tuża apparati elettriċi biex tnaqqas ir-riskju ta' nar, xokk elettriku, u korriment personali.
- Aqra l-istruzzjonijiet kollha qabel tuża l-apparat.
- Do not allow children to play with the appliance. Supervise children and pets when the robot is operating.
- Tħaddimx ir-robot f'żoni b'fjammi mikxufa jew oġġetti fraġli.
- Ensure the charging base is placed on a flat surface against a wall, with adequate clear space around it (approximately 1 meter on each side).
- Żomm ix-xagħar, il-ħwejjeġ laxki, is-swaba’, u l-partijiet kollha tal-ġisem 'il bogħod minn fetħiet u partijiet li jiċċaqilqu.
- Tiġborx oġġetti kbar jew li jaqtgħu, likwidi, jew materjali li jaqbdu/jpejpu.
- Use only the manufacturer-specified charger and accessories.
- Tużax ir-robot f'ambjenti mxarrbin jew fuq uċuħ imxarrbin.
- Before cleaning or maintenance, ensure the robot is turned off and disconnected from the power supply.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti u f'kundizzjoni tajba:
- Cecotec Conga 3090 Robot Vacuum Cleaner
- Bażi tal-Iċċarġjar
- Adapter tal-Enerġija
- Kontroll mill-bogħod
- Drapp tal-mopp
- Water Tank (for mopping)
- Xkupilji tal-ġenb (sett)
- Filtru ta 'Effiċjenza Għolja
- Pinzell tat-tindif
- Manwal ta' Istruzzjoni
4. Prodott Aktarview
Familiarize yourself with the main components of your Conga 3090 robot vacuum cleaner.
Figura 4.1: Fuq view of the Conga 3090 robot vacuum cleaner, showing the laser sensor, power button, and home button.
- Laser Sensor: Għal navigazzjoni u mmappjar preċiżi.
- Buttuna tal-Qawwa: Biex tixgħel/titfi r-robot u tibda/twaqqaf it-tindif.
- Buttuna tad-dar: Biex tibgħat ir-robot lura lejn il-bażi tal-iċċarġjar tiegħu.
- Trab tat-trab: Jiġbor il-ħmieġ u l-fdalijiet.
- Xkupilji tal-ġenb: Knes il-fdalijiet fil-mogħdija prinċipali tal-pinzell.
- Pinzell Prinċipali: Agitates and lifts dirt from floors.
- Roti: Għall-moviment fuq diversi uċuħ.
- Sensers: Anti-drop and anti-collision sensors.
5. Setup
5.1. Tqegħid tal-Bażi tal-Iċċarġjar
Place the charging base on a hard, level surface against a wall. Ensure there is at least 1 meter of clear space on both sides of the base and 1.5 meters in front of it. This allows the robot to easily locate and return to the base.
5.2. Iċċarġjar Inizjali
- Qabbad l-adapter tal-enerġija mal-bażi tal-iċċarġjar u pplaggjah f'sokit tal-ħajt.
- Place the robot on the charging base, ensuring the charging contacts align.
- Allow the robot to charge completely before its first use. The indicator light will change when fully charged.
5.3. Installazzjoni tal-App u Konnessjoni Wi-Fi
To unlock the full functionality of your Conga 3090, download the official Cecotec Conga app on your smartphone.
- Download the "Conga" app from your smartphone's app store (iOS or Android).
- Irreġistra kont jew idħol.
- Follow the in-app instructions to add your Conga 3090. Nota: The app requires a 2.4GHz Wi-Fi network. Ensure your router is configured to support this frequency. Avoid Wi-Fi network names or passwords with special characters.
- Ladarba tkun konness, l-app tiggwidak fil-proċess inizjali tal-immappjar.
5.4. Immappjar Inizjali
For optimal performance, allow the robot to complete a full mapping run of your home without interruption. Clear any obstacles, loose cables, or small items from the floor. The robot will create an interactive map visible in the app, which it uses to plan efficient cleaning routes.
Figura 5.1: The Conga 3090 utilizing its iTech Laser 360 technology to scan and map its surroundings for efficient cleaning.
6. Istruzzjonijiet Operattivi
6.1. Modi ta 'tindif
The Conga 3090 offers 10 cleaning modes, accessible via the app or remote control:
- Modalità Awtomatika: Ir-robot inaddaf b'mod intelliġenti ż-żona mmappjata kollha.
- Modalità Xifer: Cleans along walls and corners.
- Modalità Spot: Cleans a specific area intensively. Select a point on the map in the app.
- Tindif taż-Żona: Define specific rooms or areas on the app's map for the robot to clean.
- Żoni Ristretti: Use the app to draw virtual walls or restricted zones where the robot should not enter.
- Modalità ta' Scrubbing: Attach the water tank and mop cloth for simultaneous vacuuming and mopping.
- Turbo Clean CarPET: Automatically increases suction power when detecting carpets.
6.2. Skedar
Use the smartphone app to set weekly cleaning schedules. You can program specific times and cleaning modes for different days.
6.3. Kontroll tal-Vuċi
The Conga 3090 is compatible with Alexa and Google Home. Follow the instructions in your smart home app to link your robot and control it with voice commands (e.g., "Alexa, start cleaning," "Hey Google, send the robot home").
6.4. Funzjoni tat-Tqaxxir
- Fill the water tank with clean water. A small amount (approx. 2ml per 100-115ml) of non-foaming floor cleaner can be added. Use distilled water if your tap water is hard.
- Waħħal id-drapp tal-mopp sew mat-tank tal-ilma.
- Slide the filled water tank into the designated slot on the robot.
- Select a mopping mode via the app or remote control.
- After mopping, remove the water tank, empty any remaining water, and clean the mop cloth.
7. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-vacuum cleaner robot tiegħek.
7.1. Tbattil tal-landa taż-żibel
Empty the dustbin after each cleaning cycle or when full. Press the release button, remove the dustbin, open it, and discard the contents. Clean the dustbin with a dry cloth.
7.2. Tindif tal-Filtri
Tap the high-efficiency filter to remove dust. Do not wash the high-efficiency filter with water. The foam filter can be rinsed with water and air-dried completely before reinstallation. Replace filters every 3-6 months, depending on usage.
7.3. Xkupilji tat-Tindif
- Xkupilji tal-ġenb: Regularly check for tangled hair or debris. Remove and clean them using the provided cleaning tool or a pair of scissors.
- Pinzell Prinċipali: Remove the main brush cover and lift out the brush. Use the cleaning tool to remove hair and debris. Ensure the brush spins freely after cleaning.
7.4. Cleaning Water Tank and Mop Cloth
After each mopping session, empty any remaining water from the tank. Rinse the tank thoroughly. Wash the mop cloth by hand or machine and allow it to air dry completely before storing or reusing.
7.5. Tindif tas-Sensuri u l-Kuntatti tal-Iċċarġjar
Wipe all sensors (anti-drop, anti-collision, laser) and the charging contacts on both the robot and the charging base with a clean, dry cloth. This prevents dust buildup from affecting navigation and charging.
7.6. Cleaning Wheels
Periodically check the robot's wheels for tangled hair or debris. Clean them to ensure smooth movement and prevent the robot from getting stuck.
8 Issolvi l-problemi
If you encounter issues with your Conga 3090, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ir-robot ma jixgħelx jew jiċċarġjax. | Low battery; charging contacts not aligned; power adapter issue. | Ensure robot is properly placed on the charging base. Clean charging contacts. Check power adapter connection. |
| Ir-robot jeħel spiss. | Obstacles (cables, rugs); dirty wheels; sensor malfunction. | Clear floor of obstacles. Clean wheels and sensors. Use virtual walls for problematic areas. |
| Prestazzjoni fqira tat-tindif. | Full dustbin; dirty filters/brushes; low suction mode. | Empty dustbin. Clean or replace filters and brushes. Select a higher suction mode. |
| Problemi ta' konnettività tal-app. | Incorrect Wi-Fi (not 2.4GHz); weak signal; app glitch. | Ensure Wi-Fi is 2.4GHz. Restart router and robot. Reinstall app. Check for firmware updates. |
| Robot does not map correctly or loses map. | Too many obstacles during mapping; robot moved manually during mapping; software issue. | Ensure clear path during initial mapping. Avoid manually moving the robot. Reset map in app and remap. |
| It-tindif tal-ħitan iħalli strixxi jew mhux effettiv. | Dirty mop cloth; clogged water nozzles; incorrect water/detergent ratio. | Clean mop cloth. Check water tank nozzles for clogs. Use recommended water/detergent ratio. |
9. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Cecotec |
| Isem tal-Mudell | Conga Serie 3090 |
| Numru tal-Mudell | 05148 |
| Kulur | Conga 3090 (Black) |
| Dimensjonijiet tal-Prodott (L x W x H) | 34 x 34 x 9.5 ċm |
| Piż tal-oġġett | 5.88 Kilogrammi |
| Voltage | 240V |
| Materjal | Plastik |
| Livell ta' Storbju | 64 dB |
| Karatteristiċi Speċjali | Programmable, iTech Laser 360 Navigation, 4-in-1 Functionality (Sweep, Vacuum, Mop, Scrub) |
| Qawwa tal-ġbid | Sa 2000 Pa |
| Kompatibilità | Alexa, Google Home, Smartphone App |
| Tip ta' Kontrollur | Kontroll mill-bogħod, Kontroll tal-App |
| Tip ta 'filtru | Fabric (High-Efficiency) |
| Tip ta 'batterija | Lithium-ion |
| Rakkomandazzjoni tal-wiċċ | Pavimenti Iebsin, Twapet |
10. Garanzija u Appoġġ
Il-prodotti Cecotec huma manifatturati bl-ogħla standards ta’ kwalità. Għal informazzjoni dwar il-kopertura tal-garanzija, jekk jogħġbok irreferi għall-karta tal-garanzija inkluża mal-prodott tiegħek jew żur is-sit uffiċjali ta’ Cecotec. websit.
For technical support, spare parts, or any inquiries, please contact Cecotec customer service. Contact details can typically be found on the official websit jew fl-ippakkjar tal-prodott.
Note: Availability of spare parts information is currently unavailable as per product data.
