1. Prodott Aktarview
The TTEC EasyRide™ Universal Bike Phone Holder Mount is designed to securely hold your smartphone on bicycle or motorcycle handlebars. Made from durable silicone, it provides a stable and accessible platform for your device, allowing for easy navigation, fitness tracking, or communication while riding. Its universal design accommodates smartphones up to 6 inches.
Image 1.1: The TTEC EasyRide Phone Holder securely mounted on a bicycle handlebar with a smartphone in place, displaying various app icons.
2. Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja l-kontenut tal-pakkett biex tiżgura li l-oġġetti kollha huma preżenti:
- 1 x TTEC EasyRide™ Universal Bike Phone Holder Mount
Image 2.1: The TTEC EasyRide Phone Holder Mount, showcasing its flexible silicone design and handlebar clamp.
3. Istruzzjonijiet ta' Setup
Follow these steps to properly install your TTEC EasyRide™ Phone Holder Mount:
- Identify Handlebar Location: Choose a suitable, clear section on your bicycle or motorcycle handlebar for mounting. Ensure it does not obstruct your view or access to controls.
- Waħħal il-Muntanja: Iftaħ il-clamp of the phone holder and position it around the chosen section of the handlebar. Securely close the clamp. The silicone material should provide a snug fit.
- Daħħal l-Ismartphone Tiegħek: Gently stretch the silicone straps of the holder to fit around the four corners of your smartphone. Ensure the phone is centered and held firmly by all four straps. The flexible silicone allows for various phone sizes up to 6 inches.
- Ivverifika s-Sigurtà: Before riding, gently tug on the phone and the mount to ensure they are securely attached and do not wobble.
4. Istruzzjonijiet Operattivi
Once installed, using your TTEC EasyRide™ Phone Holder is straightforward:
- Orjentazzjoni tat-Telefon: The flexible design allows you to rotate your phone to either portrait or landscape orientation as needed for navigation or viewing.
- Aċċessibilità: The silicone design ensures that all ports, buttons, and cameras on your smartphone remain accessible for use while mounted.
- Riding Sikur: Always prioritize safe riding. Avoid prolonged interaction with your phone while in motion. Use voice commands or pull over to a safe location if you need to operate your device.
Image 4.1: A user navigating with their smartphone securely held by the TTEC EasyRide mount on a bicycle handlebar.
Image 4.2: Another perspective of the TTEC EasyRide mount in use, showing its low profile and secure fit on the handlebar.
5. Manutenzjoni
Biex tiżgura l-lonġevità u l-prestazzjoni ottimali tad-detentur tat-telefon tiegħek:
- Tindif: Wipe the silicone mount with a damp drapp biex tneħħi t-trab jew il-ħmieġ. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Ħażna: When not in use, store the mount in a cool, dry place away from direct sunlight to prevent material degradation.
- Spezzjoni: Periodically inspect the silicone for any signs of wear, tears, or damage. Replace the mount if any significant damage is observed to ensure continued security.
6 Issolvi l-problemi
If you encounter any issues with your TTEC EasyRide™ Phone Holder, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Phone feels loose or insecure. | Straps not properly stretched over phone corners; phone size exceeds recommended limit. | Ensure all four silicone straps are fully stretched and gripping the phone's corners. Verify your phone's dimensions are within the 6-inch limit. |
| Mount slips on handlebar. | Clamp not securely closed; handlebar surface is too smooth or oily. | Re-attach the mount, ensuring the clamp is tightly secured. Clean the handlebar surface where the mount is attached. |
| Diffikultà biex iddaħħal/tneħħi t-telefon. | New silicone material; incorrect technique. | The silicone may be stiff initially; it will become more flexible with use. Gently stretch one corner at a time when inserting or removing the phone. |
7. Speċifikazzjonijiet
Key specifications for the TTEC EasyRide™ Universal Bike Phone Holder Mount:
- Numru tal-Mudell: 2TT12
- Materjal: Silikonju
- Tip ta 'Immuntar: Manubriju
- Apparati Kompatibbli: Smartphones up to 6 inches
- Dimensjonijiet tal-Prodott (L x W x H): 12 x 3 x 17 ċm
- Piż tal-oġġett: 300 g
8. Garanzija u Appoġġ
For warranty information or technical support, please contact TTEC customer service through their official website or the retailer from whom you purchased the product. Please have your model number (2TT12) and purchase details ready when contacting support.
Għal aktar għajnuna, żur: www.ttec.com
