Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Introduzzjoni

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Istruzzjonijiet tas-Sigurtà

Importanti: Failure to follow these safety instructions may result in electric shock, fire, or personal injury.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Tiżgura l-provvista tal-enerġija voltage jaqbel mat-tikketta tal-klassifikazzjoni fuq l-apparat.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Tgħaddix l-apparat fl-ilma jew likwidi oħra.
• Jekk il-korda tal-provvista tkun bil-ħsara, għandha tiġi sostitwita mill-manifattur, l-aġent tas-servizz tiegħu, jew persuni kwalifikati bl-istess mod biex jiġi evitat periklu.
• Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom.

3. Prodott Aktarview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Elementi li jsaħħnu: Horizontal round tubes for towel drying and radiant heat.
• Blower: Located at the bottom, provides rapid heat for quick room warming.
• Panew tal-Kontroll LCD: Displays temperature, mode, and programming settings.
• Buttuni tal-Kontroll: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Figura 3.2: Quddiem view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view tal-apparat, uriasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Figura 3.3: Angolat view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Setup u Installazzjoni

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Immuntar

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Konnessjoni Elettrika

• Twissija: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Żgura ertjar xieraq.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Istruzzjonijiet Operattivi

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Power On/Off

• Agħfas il- Qawwa button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 Wiri u Kontrolli tal-LCD

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Modalità, +/-, Programm) to adjust settings.

5.3 Modi Operattivi

Your radiator typically offers several operating modes:

• Modalità Kumdità: Maintains a set temperature for continuous comfort.
• Modalità Eko: Maintains a lower, energy-saving temperature.
• Modalità ta' Protezzjoni mill-Ġlata: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Modalità tal-Programm: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Agħfas il- Modalità button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Programmazzjoni

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Agħfas il- Programm buttuna biex tidħol fil-mod ta' programmar.
2. Uża l- Modalità or arrow buttons to select the day and time segment you wish to program.
3. Uża l- +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Agħfas Programm again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Manutenzjoni

Regular cleaning ensures optimal performance and extends the lifespan of your radiator.

• Tindif: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Spezzjoni Ġenerali: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7 Issolvi l-problemi

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Speċifikazzjonijiet

• Ditta: Sauter
• Mudell: Marapi
• Numru tal-Mudell: 3410532201757
• Tip: Electric Towel Dryer Radiator with Blower
• Output tal-Enerġija: 1750 Watts
• Kontroll: LCD Screen, Programmable
• Piż: Madwar 27.25 kg
• ASIN: B07HGPKKJD

9. Garanzija u Appoġġ

For warranty information, please refer to the warranty card included with your product or visit the official Sauter websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.

Sauter Official Websit: www.sauter.fr (Jekk jogħġbok ivverifika r-reġjonali korrett) websit għal appoġġ.)