Custom Dynamics PB-45-C Probeam LED li Jgħaddi Lamps Manwal għall-Utent

Model: PB-45-C

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.

2. Prodott Aktarview

The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.

Karatteristiċi ewlenin:

Modern LED passing lamp disinn
Ħruġ ta '500 lumen
Installazzjoni plug and play
Kostruzzjoni li ma jgħaddix ilma minnha

Two Custom Dynamics PB-45-C Probeam LED Passing Lamps with chrome finish

Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamps. Dawn lamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.

3. Informazzjoni dwar is-Sigurtà

TWISSIJA: Dan il-prodott jista’ jesponik għal kimiċi inkluż iċ-ċomb, li huwa magħruf mill-Istat ta’ Kalifornja li jikkawża kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni mur fuq www.P65Warnings.ca.gov.

Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.

4. Setup u Installazzjoni

The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:

Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
Carefully remove the existing passing lamps from your motorcycle, if applicable.
Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
Securely mount the new LED passing lamps in the designated locations.
Reconnect the battery and test the functionality of the new lamps.
Aġġusta l-lamp angle for optimal beam pattern and visibility.

For detailed vehicle-specific instructions, refer to your motorcycle's service manual.

5. Operazzjoni

Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view tat-triq.

Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
Ensure both lamps illuminate correctly.
Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.

6. Manutenzjoni

The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.

Tindif: Naddaf il-lenti b'artab, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
Spezzjoni: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
Siġill li ma jgħaddix ilma minnu: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.

7 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Lamps do not illuminate	Loose connection, blown fuse, incorrect wiring, or adapter needed.	Check all connections, inspect vehicle's fuse box, verify wiring against motorcycle's diagram, ensure adapter 2001-1266 is used for pre-'04 models.
Wieħed lamp mhux qed jaħdem	Difettuż lamp, loose connection to one lamp.	Check connection to the non-working lamp. If still not working, contact Custom Dynamics support.
Flikkjaturi lamps	Provvista tal-enerġija instabbli, konnessjoni maħlula.	Tiżgura vol stabblitage from the motorcycle's electrical system. Check all connections for tightness.

8. Speċifikazzjonijiet

Attribut	Dettall
Brand	Dinamika tad-dwana
Numru tal-Mudell	PB-45-C
Lamp Daqs	4.5 pulzieri
Output tad-Dawl	500 lumens
Kulur	Chrome
Kulur tal-Lenti	Ċara
Karatteristika Speċjali	Waterproof
Piż tal-oġġett	2.85 liri
UPC	644978551043

9. Garanzija u Appoġġ

For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official website or the product packaging for the most current contact details and warranty policy.

Websit: www.customdynamics.com

	Ras LED Adattiva Custom Dynamics ProBEAM ta' 7"amp Istruzzjonijiet għall-installazzjoni Gwida għall-installazzjoni pass pass għall-Custom Dynamics ProBEAM 7" Adaptive LED Headlamp (Numri tal-Parti PB-7A14-B, PB-7A14-C) għal muturi Harley-Davidson. Jinkludi informazzjoni dwar il-kompatibbiltà u dijagrammi tal-wajers.
	Istruzzjonijiet għall-Installazzjoni tad-Dwal LED Sekwenzjali tas-Saddlebag ProBEAM® Gwida dettaljata għall-installazzjoni għad-Dwal LED Sekwenzjali tas-Saddlebags Custom Dynamics ProBEAM®, li tkopri l-kontenut tal-pakkett, il-kompatibbiltà tal-vettura, il-prekawzjonijiet ta' sigurtà, u struzzjonijiet ta' assemblaġġ pass pass għall-mudelli Harley-Davidson Touring.
	Istruzzjonijiet għall-Installazzjoni tas-Sinjali tad-Dawra LED Custom Dynamics Road Glide Istruzzjonijiet għall-installazzjoni għas-Sinjali tad-Dawra LED Custom Dynamics Road Glide, inklużi n-numri tal-partijiet, il-kontenut tal-pakkett, il-kompatibbiltà tal-vettura, u gwida pass pass bi twissijiet ta' sigurtà.
	Gwida għat-Tqassim tal-Kontroll tal-Allinjament u s-Servizz tat-Transceiver Yaesu FT-101E Dijagrammi u noti komprensivi dwar it-tqassim tal-kontroll tas-servizz u l-allinjament għat-transceiver HF Yaesu FT-101E. Din il-gwida tagħti dettalji dwar il-punti ta' aġġustament, il-postijiet tal-komponenti, u proċeduri speċifiċi għal diversi mudelli inklużi l-varjanti Mk I, Mk II, B, u E. Tkopri l-unitajiet tal-qawwa, tar-rettifikatur, IF, RF, VFO, u tal-awdjo, flimkien ma' tekniki ġenerali ta' aġġustament għal slugs, trimmers, u potenzjometri.