Emtek 2113 Keyed Pocket Door Mortise Lock User Manual

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Emtek 2113 Keyed Pocket Door Mortise Lock. Please read all instructions carefully before beginning installation or use to ensure proper function and longevity of the product. Retain this manual for future reference.

Prodott Overview

The Emtek 2113 is a modern rectangular keyed mortise lock designed for pocket doors. It features a robust metal construction and an Oil Rubbed Bronze finish, providing both security and aesthetic appeal.

Figura 1: Emtek 2113 Keyed Pocket Door Mortise Lock components, showing the mortise body and the flush pull with keyway. This image displays the two main components of the Emtek 2113 Keyed Pocket Door Mortise Lock: the mortise mechanism designed to be installed within the door, and the flush pull plate featuring a key cylinder for locking and unlocking.

Figura 2: Close-up view of the Oil Rubbed Bronze finish on the Emtek pocket door lock. A detailed close-up of the Oil Rubbed Bronze finish, highlighting the texture and color of the metal, which is characteristic of the Emtek 2113 pocket door mortise lock.

Setup u Installazzjoni

Rekwiżiti ta' Installazzjoni

• Ħxuna tal-Bieb: Minimum 1-3/8 inches (35mm).
• Għodod Meħtieġa: Drill, appropriate drill bits, chisel, screwdriver, measuring tape, pencil.
• Ensure the door is properly prepared for a mortise lock installation.

Installazzjoni pass pass

Nota: Professional installation is recommended for optimal performance and to prevent damage to the door or lock.

1. Ipprepara l-Bieb: Mark the desired height for the lock on the door edge. Use a template (if provided) to mark the mortise pocket and faceplate dimensions.
2. Mortise the Door: Carefully chisel out the mortise pocket in the door edge to accommodate the lock body. Ensure the depth and dimensions match the lock specifications.
3. Drill for Spindle and Cylinder: Drill holes through the door face for the spindle and key cylinder according to the template.
4. Installa l-Korp tal-Mortise: Insert the mortise lock body into the prepared pocket. Secure it with screws through the faceplate into the door edge.
5. Installa t-Trim: Attach the flush pulls and key cylinder to the door, ensuring they align correctly with the mortise body. Secure all components with the provided mounting hardware.
6. Operazzjoni tat-Test: Test the locking and unlocking mechanism with the key and any interior thumb turn to ensure smooth operation.

Istruzzjonijiet Operattivi

Qfil u Nisfruttaw

• Biex Tissakkar minn Barra: Insert the key into the keyway on the exterior flush pull. Turn the key to engage the locking mechanism. Remove the key.
• Biex tiftaħ minn barra: Insert the key into the keyway. Turn the key to disengage the locking mechanism. Remove the key.
• To Lock/Unlock from Interior: Use the interior thumb turn (if applicable) or keyway to engage/disengage the lock.

Manutenzjoni

Kura u Tindif

• Tindif: Naddaf l-uċuħ esterni tas-serratura b'drapp artab u damp drapp. Evita prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Lubrikazzjoni: Periodically apply a small amount of graphite-based lubricant to the keyway and internal moving parts of the mortise mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dust and grime.
• Spezzjoni: Regularly check all screws and mounting hardware to ensure they are tight. Tighten any loose screws to prevent wobbling or misalignment.

Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet

• Key is difficult to turn:
  • Kun żgur li ċ-ċavetta hija mdaħħla kompletament.
  • Applika lubrikant tal-grafita fuq il-kanal taċ-ċavetta.
  • Check for any obstructions in the keyway.
• Door does not latch or lock properly:
  • Verify that the strike plate on the door frame is correctly aligned with the mortise bolt. Adjust if necessary.
  • Check for any debris or obstructions in the mortise pocket or strike plate opening.
  • Ensure all mounting screws are tight and the lock body is securely seated.
• Loose handles/flush pulls:
  • Tighten the set screws or mounting screws that secure the flush pulls to the door.

Speċifikazzjonijiet

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

Emtek products are manufactured to high standards and are backed by a manufacturer's warranty. For specific details regarding your product's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Emtek websit.

Appoġġ għall-Klijent

If you encounter any issues or have questions not covered in this manual, please contact Emtek customer support. Contact information can typically be found on the Emtek webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.