HILTI 282140 Side Handle Instruction Manual for DC 125-S/AG 125-S/SE Tools

1. Prodott Aktarview

This manual provides essential information for the safe and effective use of the HILTI 282140 Side Handle. This accessory is designed to enhance control and stability when operating compatible HILTI DC 125-S, AG 125-S, and SE series cutting, sawing, and grinding tools. Proper installation and use are crucial for operator safety and optimal tool performance.

Figura 1: HILTI 282140 Side Handle. This image shows the metallic side handle, designed for ergonomic grip and secure attachment to HILTI power tools.

2. Istruzzjonijiet tas-Sigurtà

Always adhere to the safety guidelines provided in the main instruction manual of your HILTI power tool (DC 125-S, AG 125-S, or SE). The side handle is an accessory and does not replace the need for general power tool safety practices.

Aqra l-istruzzjonijiet kollha: Before using the side handle, read and understand all instructions in this manual and the power tool's manual.
Secure attachment: Ensure the side handle is securely fastened to the tool before operation. A loose handle can lead to loss of control and injury.
Żomm qabda soda: Always maintain a firm, two-handed grip on the power tool, utilizing the side handle for maximum control.
Spezzjona qabel l-użu: Before each use, inspect the side handle for any damage, cracks, or wear. Do not use a damaged handle.
Żomm idejk 'il bogħod minnek: Ensure hands are kept clear of rotating or moving parts of the power tool during operation.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti meta tiftaħ il-pakkett:

HILTI 282140 Side Handle (1 unit)

4. Setup u Installazzjoni

The HILTI 282140 Side Handle is designed for easy attachment to compatible HILTI power tools.

Identify the mounting point: Locate the threaded mounting hole on the side of your HILTI DC 125-S, AG 125-S, or SE tool. This is typically near the gear housing.
Thread the handle: Align the threaded end of the side handle with the mounting hole. Carefully thread the handle into the hole by turning it clockwise.
Tighten securely: Hand-tighten the side handle firmly until it is secure. Do not overtighten, but ensure there is no play or looseness. The handle should be stable and not rotate freely.
Check position: Adjust the handle's angle if necessary to achieve a comfortable and secure grip for your intended application. Ensure it does not obstruct ventilation or operational controls.

Nota: Always ensure the power tool is disconnected from its power source before attaching or detaching the side handle.

5. Istruzzjonijiet Operattivi

The side handle provides an additional point of contact for improved control and reduced operator fatigue during cutting, sawing, and grinding tasks.

Operazzjoni b'żewġ idejn: Always operate the power tool with both hands, one on the main grip and the other firmly on the HILTI 282140 Side Handle.
Żomm il-bilanċ: Use the side handle to maintain balance and apply even pressure during operation, especially when working on uneven surfaces or in awkward positions.
Control kickback: A firm grip on the side handle can help mitigate the effects of kickback, providing better control over the tool.
Ergonomija: Position the side handle to allow for a natural and comfortable wrist position, reducing strain during prolonged use.

6. Manutenzjoni

Regular maintenance ensures the longevity and safe operation of your HILTI 282140 Side Handle.

Tindif: Imsaħ il-manku nadif b'reklamaramp cloth after each use to remove dust, debris, and grime. Avoid using harsh chemicals or solvents that could damage the material.
Spezzjoni: Periodically inspect the handle for any signs of wear, cracks, deformation, or damage to the threads.
Ħażna: Store the side handle in a clean, dry place, away from direct sunlight and extreme temperatures, when not in use.

7 Issolvi l-problemi

If you encounter issues with your HILTI 282140 Side Handle, refer to the following common problems and solutions:

Problema	Kawża Possibbli	Soluzzjoni
Side handle feels loose or wobbly.	Handle not tightened sufficiently.	Ensure the handle is securely hand-tightened into the tool's mounting point.
Handle cannot be threaded into the tool.	Incorrect alignment or damaged threads.	Check for proper alignment. Inspect threads on both the handle and the tool for damage. Do not force. If threads are damaged, contact HILTI service.
Skumdità waqt l-użu.	Improper handle position.	Adjust the handle's angle to a more ergonomic position that suits your grip and task.

8. Speċifikazzjonijiet

Numru tal-Mudell: 282140
Ditta: HILTI
Materjal: Metall, Stainless Steel
Piż tal-oġġett: Madwar 7-il uqija (198 gramma)
Immaniġġjar/Pjazzament tal-Lieva: Ġenb
Użi Speċifiċi: Tool Handle for cutting, sawing, grinding applications
Kompatibilità: HILTI DC 125-S, AG 125-S, SE series tools

9. Garanzija u Appoġġ

HILTI products are manufactured to the highest quality standards. For information regarding warranty coverage, service, or technical support for your HILTI 282140 Side Handle or compatible HILTI tools, please refer to the official HILTI website or contact your local HILTI representative.

HILTI Customer Service: Jekk jogħġbok żur www.hilti.com għal informazzjoni ta' kuntatt u riżorsi ta' appoġġ fir-reġjun tiegħek.

	Hilti DC-EX 125/5"M Slitting Hood - Operating Instructions Official operating instructions for the Hilti DC-EX 125/5"M slitting hood. This accessory is designed for professional use with angle grinders for cutting and slitting mineral materials like masonry, integrating with dust extractors for efficient operation.
	Hilti DCG 125-S/DAG 125-S/DAG 125-SE Angle Grinder Operating Instructions Official operating instructions and safety guide for the Hilti DCG 125-S, DAG 125-S, and DAG 125-SE angle grinders. Covers usage, safety, maintenance, troubleshooting, and technical specifications.
	HILTI AG 500-11S 05 Operating Instructions Operating instructions and safety manual for the HILTI AG 500-11S 05 angle grinder, covering safe handling, proper usage, maintenance, and technical specifications for professional use.
	Hilti AG 125-19SE Angle Grinder Operating Instructions and Safety Manual Comprehensive operating instructions and safety manual for the Hilti AG 125-19SE angle grinder. This document provides essential safety guidelines, operational procedures, maintenance advice, technical specifications, and troubleshooting information for professional use.
	Grinder tal-Angolu mingħajr Fili HILTI AG 6D-22-125: Istruzzjonijiet għat-Tħaddim u Gwida għas-Sigurtà Istruzzjonijiet dettaljati dwar l-operat u linji gwida komprensivi dwar is-sigurtà għall-grinder tal-angolu mingħajr fili HILTI AG 6D-22-125. Dan il-manwal huwa ddisinjat għal utenti professjonali u jkopri l-karatteristiċi, l-użu u l-manutenzjoni tal-prodott.
	Hilti DST 20-CA Electric Wall Saw: Original Operating Instructions This document provides comprehensive operating instructions for the Hilti DST 20-CA electric wall saw. It details safety precautions, assembly procedures, operational guidelines, technical specifications, and maintenance requirements for professional users.

HILTI 282140