Prodott Overview
The ROBOTIME Marble Run Lift Coaster (Model LG503) is an engaging wooden mechanical puzzle designed for assembly. This kit allows you to construct a functional marble run with intricate gears and tracks, providing both a challenging building experience and an entertaining display.
Image: Fully assembled Robotime Marble Run Lift Coaster, showcasing its wooden construction and marble lifting mechanism.
Karatteristiċi ewlenin:
- Build your own wooden marble run, engaging your crafting skills.
- Laser-cut parts are easily pushed out from the wooden sheets.
- Step-by-step manual facilitates easy assembly.
- Enjoyable to build and equally fun to play with.
- Metal marbles included.
Informazzjoni dwar is-Sigurtà:
Warning: Not suitable for children under 36 months due to small parts.
Setup u Assemblea
Assembly of the ROBOTIME Marble Run Lift Coaster requires careful attention to detail and patience. The kit includes all necessary wooden parts, wood glue, and metal marbles. An estimated assembly time is approximately 1 hour, but this may vary based on individual experience.
Qabel ma tibda:
- Iftaħ il-komponenti kollha mill-pakkett u vverifika mal-lista tal-partijiet fil-manwal inkluż.
- Ipprepara spazju tax-xogħol nadif u mdawwal sew.
- Familiarize yourself with the step-by-step instructions provided in the physical manual.
- Ensure you have the included wood glue readily available.
Image: Diagram showing the dimensions of the assembled Marble Run Lift Coaster: 252mm length, 227mm width, and 203mm height.
Għajnuniet dwar l-Assemblea:
- Handle laser-cut parts gently when pushing them out to prevent breakage.
- Follow the numbered steps in the manual precisely.
- Apply wood glue sparingly where indicated, allowing sufficient drying time.
- Ensure all gears and moving parts are aligned correctly and move freely before proceeding to the next step.
Istruzzjonijiet Operattivi
Once fully assembled, the ROBOTIME Marble Run Lift Coaster operates manually. It does not require batteries or external power.
Kif topera:
- Place the assembled marble run on a stable, flat surface.
- Place the included metal marbles into the designated starting point or collection tray.
- Locate the hand crank mechanism (typically on the side or front of the model).
- Gently turn the hand crank clockwise to activate the lift mechanism. This will raise the marbles to the top of the track.
- Observe as the marbles descend through the various tracks and obstacles, returning to the collection tray.
- Continue turning the crank to enjoy continuous marble action.
Immaġni: Close-up view of the intricate wooden gear system responsible for lifting the marbles in the coaster.
Immaġni: Dettaljata view of a section of the marble track, showing the precision of the laser-cut wooden components.
Manutenzjoni
The ROBOTIME Marble Run Lift Coaster requires minimal maintenance to ensure smooth operation and longevity.
Kura Ġenerali:
- Keep the model clean and free from dust. Use a soft, dry cloth to gently wipe surfaces.
- Avoid exposing the model to direct sunlight, extreme temperatures, or high humidity, as this can cause the wood to warp or crack.
- Do not use water or chemical cleaners on the wooden parts.
Lubrikazzjoni (Mhux obbligatorja):
If the gears or moving parts become stiff over time, a small amount of paraffin wax or a dry lubricant (like graphite powder) can be applied to contact points to improve smoothness. Avoid using oil-based lubricants, as they can attract dust and damage the wood.
Issolvi l-problemi
If you encounter issues with your Marble Run Lift Coaster, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Marbles get stuck on the track. | Misaligned track sections, dust/debris, or insufficient lubrication. |
|
| Lift mechanism is stiff or not moving. | Gears are misaligned, friction, or parts are not fully seated. |
|
| Parts break during assembly. | Excessive force applied, or part not properly aligned. |
|
Speċifikazzjonijiet
- Mudell: LG503
- Ditta: ROBOTIME
- Dimensjonijiet tal-Prodott (L x W x H): 25.5 x 22.9 x 0.1 cm (flat sheet size); Assembled: 25.2 x 22.7 x 20.3 cm
- Piż: 840 g
- Materjal: Injam
- Numru ta' Biċċiet: 217
- Assemblaġġ Meħtieġa: Iva
- Ħin tal-Assemblea Stima: 1 Siegħa
- Batteriji Meħtieġa: Nru
- Komponenti Inklużi: Laser-cut wooden parts, wood glue, metal marbles, instruction manual.
- Età Rakkomandata: Adulti
- Għan Edukattiv: Ħiliet ta' Tqabbil
- Tema: Fantasija
- GTIN: 06946785178555
Garanzija u Appoġġ
The ROBOTIME Marble Run Lift Coaster (Model LG503) comes with a Garanzija ta' 1 snin mill-manifattur mid-data tax-xiri.
Kopertura tal-garanzija:
Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali. Ma tkoprix ħsara li tirriżulta minn użu ħażin, aċċident, modifika, jew tiswija mhux awtorizzata.
Appoġġ għall-Klijent:
For warranty claims, missing parts, or technical assistance, please contact ROBOTIME customer support. Refer to the contact information provided in your original product packaging or visit the official ROBOTIME webis-sit għad-dettalji ta' appoġġ l-aktar aġġornati.
Tista 'wkoll iżżur il- ROBOTIME Store on Amazon għal aktar informazzjoni u dettalji tal-prodott.
