1. Introduzzjoni
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your uxcell Cooling Fan, model SF8025AT. Please read this manual thoroughly before using the product and retain it for future reference.
Figure 1: uxcell Cooling Fan SF8025AT (Front View)
2. Informazzjoni dwar is-Sigurtà
WARNING: To reduce the risk of electric shock, fire, or injury, read and follow all instructions carefully.
- Kun żgur li l-provvista tal-enerġija taqbel mal-volum tal-fanntage (AC 110V/120V).
- Tħaddimx il-fann b'korda tal-enerġija jew plagg bil-ħsara.
- Żomm subgħajk u oġġetti oħra 'l bogħod mix-xfafar tal-fann waqt it-tħaddim.
- Install the fan in a well-ventilated area.
- Skonnettja l-enerġija qabel ma tnaddaf jew tagħmel xi manutenzjoni.
- This product is designed for specific applications; consult a professional if unsure about compatibility.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- 1 x uxcell Cooling Fan SF8025AT
- (Mounting screws and other accessories may be sold separately or included depending on the specific retail package.)
4. Speċifikazzjonijiet
Technical specifications for the uxcell Cooling Fan SF8025AT:
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | SF8025AT |
| Dimensjonijiet (L x W x H) | 80 x 80 x 25mm (3.15" x 3.15" x 0.98") |
| Distanza tat-Toqba tal-Immuntar | 73 x 73 mm |
| Voltage | AC 110V/120V |
| Kurrent Rated | 0.1A |
| Qawwa tad-Dħul | 15.4W |
| Speed (R.P.M.) | 2500 R.P.M. (+/- 10%) |
| Fluss ta' Arja (CFM) | 0.5 CFM Max. |
| Livell ta' Storbju | 30 dB-A |
| Tip ta 'Bearing | Bearing Ball Doppju |
| Materjal | Plastik |
| Piż | 216g (7.62 oz) |
Figure 2: Fan Dimensions and Mounting Holes
5. Setup u Installazzjoni
Follow these steps for proper installation of your cooling fan:
- Preparazzjoni: Ensure the device where the fan will be installed is powered off and disconnected from the main power supply.
- Post tal-Immuntar: Identify a suitable mounting location that allows for optimal airflow. The fan is designed for 80mm x 80mm mounting points.
- Orjentazzjoni: Determine the desired airflow direction. Fans typically have an arrow indicating airflow direction on the side frame. Ensure the fan is oriented to draw air in or push air out as required by your system.
- Immuntar Sikur: Use appropriate screws (not included) to secure the fan to the mounting surface. Ensure the fan is firmly attached to prevent vibration and noise. The mounting hole distance is 73mm x 73mm.
- Konnessjoni tal-Enerġija: Connect the fan's power cable to an AC 110V/120V power source. This fan typically uses a 2-wire connection for AC power. Ensure connections are secure and insulated.
- Kontroll Finali: Before restoring power, double-check all connections and ensure no wires are obstructing the fan blades.
Figure 3: uxcell Cooling Fan SF8025AT (Back View)
6. Istruzzjonijiet Operattivi
Once installed, operating the uxcell Cooling Fan is straightforward:
- Qawwa Mixgħul: Restore power to the device or system where the fan is installed. The fan should begin operating immediately.
- Ivverifika l-Operazzjoni: Observe the fan to ensure the blades are spinning freely and quietly. Check for proper airflow in the intended direction.
- Operazzjoni Kontinwa: This fan is designed for continuous operation to provide consistent cooling.
7. Manutenzjoni
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- Tindif: Periodically inspect the fan blades and housing for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
- Tneħħija tat-Trab: To clean, first disconnect the fan from its power source. Use a soft brush, compressed air, or a vacuum cleaner with a brush attachment to gently remove dust from the blades and grille. Do not use liquids or harsh chemicals.
- Spezzjoni: Check for any signs of wear, such as loose wires or damaged blades. If any damage is found, discontinue use and replace the fan.
- Manutenzjoni tal-bearings: The dual ball bearings are designed for long-term, maintenance-free operation. No lubrication is typically required.
8 Issolvi l-problemi
If you encounter issues with your uxcell Cooling Fan, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Fann ma jdurx | No power supply; Loose connection; Damaged fan motor. | Check power source and connections. Ensure voltage matches fan requirements. If connections are secure and power is present, the fan may be faulty and require replacement. |
| Il-fann huwa storbjuż | Dust accumulation; Loose mounting screws; Obstruction; Worn bearings. | Clean fan blades and housing. Tighten mounting screws. Remove any obstructions. If noise persists, bearings may be worn, and the fan may need replacement. (Note: This model has a rated noise level of 30 dB-A, which is audible.) |
| Fluss ta 'arja insuffiċjenti | Dust accumulation; Incorrect orientation; Obstruction. | Clean fan blades and grille. Verify fan is oriented correctly for desired airflow. Remove any obstructions in the airflow path. |
9. Garanzija u Appoġġ
For warranty information or technical support, please refer to the uxcell official webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Informazzjoni ta' Kuntatt:
- Ditta: uxcell
- Websit: Visit the uxcell Store on Amazon (għal informazzjoni ġenerali dwar il-prodott)