1. Introduzzjoni
This manual provides essential information for the safe and efficient operation of your Behringer NX3000D Ultra-Lightweight 3000 Watt Class-D Power Amplifier. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Karatteristiċi ewlenin:
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (Bridge mode).
- Weighs less than 7.9 lbs / 3.6 kg, ensuring portability.
- Features revolutionary cool-running high-density Class-D technology for ultimate reliability and near-zero thermal buildup.
- Equipped with an ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption.
- High-performance DSP and 24-bit/96 kHz converters provide ultimate signal integrity and extreme dynamic range.
- DSP section includes sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings.
2. Istruzzjonijiet Importanti dwar is-Sigurtà
Dejjem segwi dawn il-prekawzjonijiet bażiċi tas-sigurtà meta tuża tiegħek ampaktar ħaj:
- Aqra dawn l-istruzzjonijiet.
- Żomm dawn l-istruzzjonijiet.
- Oqgħod attent għat-twissijiet kollha.
- Segwi l-istruzzjonijiet kollha.
- Tużax dan l-apparat ħdejn l-ilma.
- Naddaf biss b'ċarruta niexfa.
- Timblokka l-ebda fetħiet tal-ventilazzjoni. Installa skond l-istruzzjonijiet tal-manifattur.
- Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
- M'għandekx tegħleb l-iskop tas-sigurtà tal-plagg polarizzat jew tat-tip ta 'l-ert. Plagg polarizzat għandu żewġ xfafar b'waħda usa 'mill-oħra. Plagg tat-tip ta 'l-ert għandu żewġ xfafar u t-tielet prong ta' l-ert. Ix-xafra wiesgħa jew it-tielet prong huma pprovduti għas-sigurtà tiegħek. Jekk il-plagg ipprovdut ma jidħolx fl-iżbokk tiegħek, ikkonsulta elettriċista għas-sostituzzjoni tal-iżbokk skadut.
- Ipproteġi l-korda tad-dawl milli timxi fuqha jew maqrusa, partikolarment fil-plakek, ir-reċipjenti tal-konvenjenza, u l-punt fejn joħorġu mill-apparat.
- Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
- Uża biss mal-karrettun, stand, tripod, bracket, jew mejda speċifikati mill-manifattur, jew mibjugħa mal-apparat. Meta jintuża karrettun, uża l-kawtela meta ċċaqlaq il-kombinazzjoni tal-karrettun/apparat biex tevita korriment minn qlib.
- Aqla’ dan l-apparat waqt maltempati tas-sajjetti jew meta ma jintużax għal perjodi twal ta’ żmien.
- Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat. Is-servizz huwa meħtieġ meta l-apparat ikun ġie bil-ħsara b'xi mod, bħal korda tal-provvista tal-enerġija jew plagg ikun bil-ħsara, likwidu jkun inxtered jew oġġetti jkunu waqgħu fl-apparat, l-apparat ikun ġie espost għax-xita jew umdità, ma jaħdimx b'mod normali , jew twaqqgħet.
3. X'hemm fil-Kaxxa
Upon unpacking your Behringer NX3000D, ensure all items listed below are present and in good condition:
- Behringer NX3000D 3000W Ultra-Lightweight Class-D Power Ampaktar ħaj
- Kejbil tal-Enerġija
- Quick Start Guide (this document serves as the comprehensive manual)
Jekk xi oġġetti huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja lin-negozjant tiegħek immedjatament.
4. Prodott Aktarview
Familiarize yourself with the front and rear panels of your NX3000D ampaktar ħaj.
4.1 Panel ta 'Quddiem
Immaġni: Quddiem view of the Behringer NX3000D Power Amplifier, showing the main display, control knobs for channels A and B, and status indicators.
Immaġni: Quddiem angolat view of the Behringer NX3000D Power Amplifier, highlighting the rack-mountable design and ventilation grilles.
- Buttuna tal-Qawwa: Dawwar il- amplifier mixgħul jew mitfi.
- Level Controls (CH A/CH B): Aġġusta s-sensittività tad-dħul għal kull kanal.
- Display LCD: Shows DSP settings, operating modes, and status information.
- Navigation Buttons (SETUP, PROCESS, UP/DOWN, EXIT): Used to navigate and adjust DSP parameters.
- LED Indicators (SIGNAL, LIMIT, PROTECT): Provide visual feedback on signal presence, clipping, and protection status.
4.2 Panel ta 'wara
Immaġni: Wara view of the Behringer NX3000D Power Amplifier, displaying input and output connectors, cooling fan, and power inlet.
Image: Angled rear view of the Behringer NX3000D Power Amplifier, showing the USB port for PC connection and additional ventilation.
- Input AC: Connects to the main power supply using the provided power cable.
- Input Connectors (CH A/CH B): XLR/TRS combo jacks for connecting audio sources.
- Output Connectors (CH A/CH B): Twist-lock speaker connectors for connecting loudspeakers.
- Port USB: For connecting to a computer for DSP control and firmware updates.
- Fann li jkessaħ: Ensures proper thermal management of the ampaktar ħaj.
5. Setup
Follow these steps to set up your Behringer NX3000D ampaktar ħaj:
- Pjazzament: Pożizzjona l amplifier in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate space around the unit for airflow. For rack mounting, secure the amplifier using appropriate rack screws.
- Konnessjoni tal-Enerġija: Connect the supplied AC power cable to the AC input on the rear panel of the amplifier and then to a suitable power outlet. Ensure the amplifier's power switch is in the OFF position before connecting.
- Konnessjonijiet tad-dħul: Connect your audio source (e.g., mixer, audio interface) to the Input Connectors (CH A and/or CH B) on the rear panel using XLR or 1/4" TRS cables.
- Konnessjonijiet tal-Ħruġ: Connect your passive loudspeakers to the Output Connectors (CH A and/or CH B) using high-quality speaker cables with twist-lock connectors. Ensure correct polarity (+ to + and - to -) and that the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or Bridge mode 4 Ohms).
- Qawwa Inizjali Mixgħula: With all connections secure and input levels turned down, switch the amplifier's power button to the ON position. The display will illuminate, and the unit will perform a self-test.
6. It-tħaddim tal- Ampaktar ħaj
The Behringer NX3000D features advanced DSP control for precise sound optimization.
6.1 Operazzjoni Bażika
- Livelli ta' Aġġustament: Slowly increase the Level Controls for CH A and/or CH B until the desired volume is achieved. Monitor the SIGNAL and LIMIT LEDs to prevent clipping. The SIGNAL LED indicates audio presence, while the LIMIT LED indicates that the signal is approaching clipping.
- Status ta' Monitoraġġ: The PROTECT LED will illuminate if the amplifier enters protection mode due to overheating, short circuits, or other issues. If this occurs, turn off the amplifier, resolve the issue, and then power it back on.
6.2 DSP Control
The integrated DSP allows for comprehensive sound shaping and system management:
- Accessing DSP Settings: Uża l- SETUP button to enter the main DSP menu. Navigate through options using the UP/ISĦU buttons and confirm selections with the rotary encoder.
- crossover: Configure high-pass and low-pass filters for each channel. Choose from 3 filter types (e.g., Butterworth, Linkwitz-Riley) and slopes up to 48 dB/octave. This is crucial for integrating subwoofers or bi-amping sistemi.
- Ekwalizzazzjoni (EQ): Utilize the 8 parametric EQs and 2 dynamic EQs per channel to fine-tune the frequency response. This helps in correcting room acoustics or tailoring the sound to specific preferences.
- Dewmien: Apply delay to individual channels to align speakers in different physical positions, ensuring phase coherence.
- Dynamics Processing: Adjust compression, limiting, and gating settings to control the dynamic range of your audio.
- SmartSense Loudspeaker Impedance Compensation: This feature automatically adjusts the amplifier's output to match the loudspeaker impedance, providing consistent power delivery and improved sound quality.
- Settings tas-Sigurtà: Lock DSP settings to prevent unauthorized changes, ideal for fixed installations.
For detailed DSP parameter adjustments, refer to the full software manual available on the Behringer website or connect the amplifier to a PC via the USB port for software control.
7. Manutenzjoni
Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tiegħek ampaktar ħaj.
- Tindif: Naddaf regolarment il-barra tal- ampNaddaf il-ventilatur b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew solventi. Kun żgur li l-gradilji tal-ventilazzjoni huma ħielsa mit-trab u l-fdalijiet.
- Ventilazzjoni: Dejjem kun żgur li l- amplifier's ventilation openings are not obstructed. Overheating can lead to reduced performance and potential damage.
- Ħażna: Jekk taħżen il amplifier for an extended period, disconnect it from power, clean it, and store it in a cool, dry place, preferably in its original packaging or a protective case.
8 Issolvi l-problemi
If you encounter issues with your Behringer NX3000D, consult the table below for common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda qawwa | Power cable disconnected; Power outlet faulty; Ampil-fjus tal-lifer maħruq. | Check power cable connection; Test outlet with another device; Contact qualified service personnel for fuse replacement. |
| Ebda output tal-ħoss | Input/output cables disconnected or faulty; Speaker impedance mismatch; Amplifier in protect mode; Input levels too low. | Check all cable connections; Verify speaker impedance; Check PROTECT LED and resolve underlying issue; Increase input levels gradually. |
| Ħoss distort | Input signal too high (clipping); Speaker impedance mismatch; Faulty cables or speakers. | Reduce input signal (monitor LIMIT LED); Verify speaker impedance; Test with different cables/speakers. |
| Amplifier overheats (PROTECT LED on) | Insufficient ventilation; Excessive load (low impedance speakers); Prolonged high-power operation. | Ensure proper ventilation; Use speakers with correct impedance; Reduce output level or allow cooling time. |
If the problem persists after attempting these solutions, please contact Behringer support or a qualified service technician.
9. Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Behringer |
| Numru tal-Mudell | NX3000D |
| Output Wattage | 2 x 1500 Watts (2 Ohms); 2 x 900 Watts (4 Ohms); 3000 Watts (4 Ohms Bridge mode) |
| Speaker AmpTip ta' lifikazzjoni | Klassi D |
| Piż tal-oġġett | 7.92 liri / 3.6 Kilogrammi |
| Dimensjonijiet tal-Prodott | 19.02 x 9.09 x 3.7 pulzieri |
| Tip ta' Konnettur | Twist-lock (Outputs), XLR/TRS Combo (Inputs) |
| Sors tal-Enerġija | Corded Elettriku |
| Voltage | 100V |
| Kulur | Iswed |
| DSP | High-performance DSP with 24-bit/96 kHz converters, delay, crossover, EQ, dynamics processing, SmartSense Impedance Compensation |
10. Garanzija u Appoġġ
10.1 Garanzija tal-Prodott
The Behringer NX3000D amplifier typically comes with a Garanzija limitata ta 'sena, indicating its design and engineering quality. Please refer to the warranty card included with your product or visit the official Behringer websit għal termini u kundizzjonijiet dettaljati.
Image: Behringer logo with a '3 Years Warranty' badge, indicating the product is designed and engineered in Germany.
10.2 Appoġġ Tekniku
For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Behringer webis-sit jew ikkuntattja l-appoġġ għall-klijenti tagħhom. Tista' ssib aktar informazzjoni u riżorsi fuq Ħanut Behringer.
