Rolair JC20 Manwal tal-Utent tal-Kumpressur tal-Arja li jinġarr

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Rolair JC20 Hand Carry Portable Air Compressor. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

The Rolair JC20 is an oilless, 2 horsepower electric air compressor designed for light-duty framing and roofing work. It features a two-cylinder pump, a low-amp draw motor, a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges, and a quarter-turn drain valve, all contributing to its quiet operation at only 70 dB.

2. Informazzjoni dwar is-Sigurtà

Always observe the following safety precautions to reduce the risk of electric shock, fire, or serious injury.

• Aqra l-Istruzzjonijiet Kollha: Familiarize yourself with the compressor's controls and proper operation.
• Sigurtà Elettrika: Kun żgur li s-sors tal-enerġija jaqbel mal-volum tal-kompressurtage (115 Volts AC). Do not operate in wet conditions. Always use a grounded outlet.
• Tagħmir Protettiv Personali: Wear safety glasses or goggles when operating the compressor or using air tools. Hearing protection is recommended, especially during prolonged use.
• Ambjent Operattiv: Operate the compressor in a well-ventilated area. Keep children and bystanders away. Do not operate near flammable liquids or gases.
• Sigurtà tal-Pressjoni: Never exceed the maximum operating pressure of any air tool or accessory. Do not attempt to modify the pressure relief valve.
• Manutenzjoni: Skonnettja l-enerġija qabel ma twettaq kwalunkwe manutenzjoni jew tiswija.
• Uċuħ sħan: The compressor pump and motor can become hot during operation. Avoid contact with hot surfaces.

3. Karatteristiċi u Komponenti Ewlenin

The Rolair JC20 is engineered with several features for performance and durability:

• Operazzjoni Super Trankwilla: Single-stage oilless design with only 70 dB noise level.
• Durable Pump: Cast aluminum cylinder with stainless steel reed valves.
• Mutur Effiċjenti: 1700 RPM low-amp draw motor with automatic overload protection.
• Protective Roll-Cage: Heavy-duty design to protect the pump and motor.
• Integrated Cord Wrap: Għal ħażna u trasport konvenjenti.
• Upward-Facing Gauges: For easy monitoring of tank and regulated pressure.
• Quarter-Turn Drain Valve: For easy moisture drainage from the tank.

Figura 3.1: Quddiem view of the Rolair JC20 Air Compressor, showing the green tank, motor, gauges, and protective roll-cage.

Figura 3.2: Angolat view highlighting the two-cylinder pump heads and motor assembly.

Figura 3.3: Ġenb view of the Rolair JC20, illustrating the compact design and component layout within the roll-cage.

4. Setup

1. Spakkjar: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your dealer immediately.
2. Pjazzament: Place the compressor on a firm, level surface in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for air circulation.
3. Konnessjoni Elettrika:
   • Ivverifika li l-provvista tal-enerġija voltage matches the compressor's requirements (115 Volts AC).
   • Plug the power cord into a grounded electrical outlet. Avoid using extension cords if possible. If an extension cord is necessary, use a heavy-duty, grounded cord of appropriate gauge for the distance.
4. Initial Drain: Before first use, ensure the quarter-turn drain valve at the bottom of the tank is closed.

5. Istruzzjonijiet Operattivi

1. Qawwa Mixgħul: Locate the ON/OFF switch (typically a rocker switch or pressure switch) and turn the compressor ON. The compressor will begin to build pressure.
2. Pressure Build-Up: Allow the compressor to run until it reaches its maximum pressure and the motor automatically shuts off. This indicates the tank is fully charged.
3. Konnessjoni tal-Għodda tal-Ajru:
   • Attach your air hose to the quick-connect coupler on the compressor.
   • Qabbad l-għodda tal-arja tiegħek mat-tarf l-ieħor tal-pajp.
4. Aġġustament tal-Pressjoni tal-Ħruġ: Use the pressure regulator knob to set the desired output pressure for your air tool. Monitor the regulated pressure gauge.
5. Operazzjoni: Begin using your air tool. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. Itfi: When finished, turn the compressor OFF using the ON/OFF switch.
7. Neħħi l-pressjoni: Disconnect the air hose and tool. Allow any remaining air in the tank to escape through the drain valve or by briefly opening the regulator.

6. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your Rolair JC20 compressor. Always disconnect the power before performing maintenance.

• Daily: Drain Moisture from Tank:
  • With the compressor off and tank depressurized, open the quarter-turn drain valve located at the bottom of the tank.
  • Allow all accumulated moisture to drain completely.
  • Close the drain valve securely.
• Weekly/Monthly: Inspect Air Filter:
  • Check the air intake filter for dirt and debris.
  • Clean or replace the filter as necessary. A clogged filter can reduce compressor performance and lifespan.
• Periodically: Inspect for Leaks:
  • With the compressor pressurized, apply a soapy water solution to all fittings and connections.
  • Bubbles indicate a leak. Tighten connections or replace seals as needed.
• Ħażna: Store the compressor in a clean, dry location. Ensure the tank is drained of moisture before storage.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, please refer to the documentation included with your purchase or visit the official Rolair website. For technical support, parts, or service inquiries, please contact Rolair customer service or your authorized dealer.

Manifattur: ROLAIR

Informazzjoni ta' Kuntatt: Please refer to the contact details provided on the Rolair official website or your purchase receipt for the most current support options.