Schulte Bathtub Shower Screen 80 x 140 cm - Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Schulte Bathtub Shower Screen. Please read this manual thoroughly before beginning installation or use to ensure safe and correct operation. Keep this manual for future reference.

Figure 1: Schulte Bathtub Shower Screen (Model B07GL32FH8) installed.

2. Istruzzjonijiet tas-Sigurtà

• Always handle glass panels with care. Tempered glass is strong but can shatter if struck at the edges.
• Ilbes tagħmir protettiv personali (PPE) xieraq bħal nuċċalijiet u ingwanti tas-sigurtà waqt l-installazzjoni.
• Ensure the mounting surface (wall) is structurally sound and capable of supporting the weight of the shower screen.
• Use only the provided mounting hardware or suitable alternatives recommended by the manufacturer.
• Do not overtighten screws, as this can damage the glass or frame.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-installazzjoni.
• If you are unsure about any step of the installation, consult a qualified professional.

3. Kontenut tal-Pakkett

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact Schulte customer service.

• 1x Glass Shower Screen Panel (5 mm tempered safety glass with anti-limescale treatment)
• 1x Wall Profile (Chrome look)
• 1x Set of Mounting Hardware (screws, wall plugs, seals)
• 1x Bottom Seal Strip
• 1x Manwal ta 'Istruzzjoni

4. Setup u Installazzjoni

The Schulte Bathtub Shower Screen is designed for screw-mounted installation and features a reversible design for left or right-hand mounting. The single panel can fold 180° against the wall.

4.1 Għodda Meħtieġa (Mhux Inkluża)

• Drill
• Drill bits (appropriate for wall material)
• Livell ta' l-ispirtu
• Tejp tal-kejl
• Lapes
• Tornavit
• Silicone sealant (bathroom grade)

4.2 Passi ta' Installazzjoni

1. Ipprepara ż-Żona: Ensure the bathtub and surrounding wall area are clean and dry.
2. Position the Wall Profile: Poġġi l-ħajt profile against the wall at the desired height and position. Use a spirit level to ensure it is perfectly vertical. Mark the drilling points.
3. Drill toqob: Drill holes at the marked points. Insert wall plugs into the drilled holes.
4. Waħħal Wall Profile: Sikura l-ħajt profile mal-ħajt bl-użu tal-viti pprovduti.
5. Mount the Glass Panel: Carefully insert the glass panel into the wall profile. Ensure the hinges are correctly aligned for 180° folding. The screen can be mounted to open to the left or right.
6. Panel tal-Ħġieġ Sikur: Secure the glass panel within the wall profile according to the detailed instructions in the included manual.
7. Install Seals: Attach the bottom seal strip to the lower edge of the glass panel to prevent water leakage. Apply silicone sealant along the exterior joint between the wall profile and the wall for a watertight seal. Allow sealant to cure completely before use.

Figure 2: Diagram illustrating the 180° folding capability of the shower screen.

5. Istruzzjonijiet Operattivi

The Schulte Bathtub Shower Screen is designed for simple and flexible use.

• Ftuħ/Għeluq: Gently push or pull the glass panel to open or close it. The panel pivots smoothly.
• Tiwi: For maximum space when not showering, the single panel can be folded 180° flat against the adjacent wall. This allows for easy access to the bathtub and maximizes bathroom space.
• Water Containment: Ensure the screen is fully closed and the bottom seal is properly seated against the bathtub edge during showering to prevent water from splashing out.

6. Manutenzjoni

Regular cleaning and proper care will ensure the longevity and appearance of your shower screen.

• Tindif ta 'Kuljum: After each use, rinse the glass panel with clean water and wipe it dry with a soft cloth or squeegee to prevent water spots and soap scum buildup.
• Tindif regolari: For more thorough cleaning, use a mild, non-abrasive glass cleaner. Avoid harsh chemicals, abrasive sponges, or scouring powders, as these can damage the anti-limescale coating and chrome finish.
• Anti-Limescale Treatment: The glass features an anti-limescale treatment (Fixil Glass Seal) which reduces water and dirt adhesion, making cleaning easier. Do not use products that could strip this coating.
• Manutenzjoni tas-Siġill: Periodically check the bottom seal strip for wear or damage. Replace if necessary to maintain water tightness.
• Manutenzjoni taċ-Ċappetta: The hinges are designed for durability. If they become stiff, a small amount of silicone-based lubricant can be applied, ensuring it does not come into contact with the glass surface.

Figure 3: The Fixil Glass Seal treatment helps prevent limescale buildup.

7 Issolvi l-problemi

• Tnixxija tal-Ilma:
  • Check if the bottom seal strip is properly installed and undamaged.
  • Ensure the silicone sealant along the wall profile is intact and watertight. Reapply if necessary.
  • Verify that the screen is fully closed during showering.
• Difficulty Folding/Pivoting:
  • Check for any obstructions around the hinges or the bottom edge of the glass.
  • Ensure hinges are clean and free of debris. A small amount of silicone lubricant may help.
• Il-Ħġieġ Jidher Imdardar/Bi Strixxi:
  • Use a dedicated glass cleaner and a soft cloth. Avoid using abrasive cleaners.
  • Ensure the glass is dried thoroughly after each use to prevent mineral deposits.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, technical support, or to order replacement parts, please contact Schulte customer service directly. Refer to the contact details provided with your purchase documentation or visit the official Schulte websit.

Please have your model number (B07GL32FH8) and date of purchase available when contacting support.