Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Dan il-prodott jista’ jesponik għal kimiċi inkluż iċ-ċomb, li huwa magħruf mill-Istat ta’ Kalifornja li jikkawża kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni mur fuq www.P65Warnings.ca.gov.

Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Exterior Lever Assembly
• Assemblea tal-Lieva Interna
• Adjustable Latch (2-3/8" - 2-3/4" backset)
• Rounded Steel Faceplate
• Strike Plate
• Viti tal-Immuntar
• Manwal ta' Istruzzjoni

Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.

Setup u Installazzjoni

This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview tal-proċess ta' installazzjoni:

1. Ipprepara l-Bieb: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
2. Adjust the Latch: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
3. Install Exterior Lever: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
4. Installa l-Lieva Interna: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
5. Installa l-Istrike Plate: Waħħal il-pjanċa tal-istrajk mal-qafas tal-bieb, billi tallinjaha mal-bolt tal-lukkett. Waħħalha bil-viti.
6. Operazzjoni tat-Test: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.

Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.

Istruzzjonijiet Operattivi

To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.

Manutenzjoni

To maintain the finish and functionality of your door lever, follow these guidelines:

• Tindif: Naddaf il-lieva b'xibka ratba, damp drapp. Evita li tuża prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Lubrikazzjoni: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
• Issikkar: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.

Issolvi l-problemi

Speċifikazzjonijiet

Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).

Garanzija u Appoġġ

For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.