1. Introduzzjoni
This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.
Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.
2. Istruzzjonijiet tas-Sigurtà
Dejjem agħti prijorità lis-sigurtà meta tħaddem għodda tal-elettriku. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta fi korriment serju jew ħsara lill-proprjetà.
2.1 Sigurtà Ġenerali
- Ilbes Tagħmir Protettiv Personali (PPE): Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
- Żona tax-Xogħol: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
- Kundizzjonijiet tat-Temp: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
- Sigurtà tal-batterija: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.
2.2 Sigurtà Speċifika tas-Serrieq tal-Katina
- Prevenzjoni ta' Kickback: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
- Brejk tal-Katina: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
- Qabda xierqa: Dejjem żomm is-serrieq tal-katina sew biż-żewġ idejn, bis-swaba’ l-kbar u subgħajk iduru mal-manki.
- Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.
Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.
3. Prodott Aktarview
The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.
3.1 Karatteristiċi ewlenin
- Brushless Motor: For enhanced power and longer run time.
- Kickback Protection System: Automatically shuts off the saw upon chain lock.
- Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
- Tool-free Chain Tension Adjustment: For quick and easy adjustments.
- Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
- Metal Grip Claws: For secure handling and stability during cuts.
- Soft Grip Handle: For comfortable operation.
Immaġni 3.1: Mill-qrib view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.
Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.
4. Setup
Qabel ma tħaddem is-serrieq tal-katina tiegħek, kun żgur li tkun immuntata u ppreparata kif suppost.
4.1 Disimballaġġ
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.
4.2 Installazzjoni tal-batterija
The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.
- Locate the battery compartments on the chainsaw.
- Slide each charged battery into its respective compartment until it clicks securely into place.
- Biex tneħħiha, agħfas il-buttuna tar-rilaxx fuq il-batterija u iġbedha 'l barra.
Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.
Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.
4.3 Chain and Bar Assembly & Tensioning
The chainsaw features tool-free chain tension adjustment.
- Ensure the chain brake is disengaged.
- Loosen the side cover knob by turning it counter-clockwise.
- Poġġi l-katina madwar l-isprocket u l-virga gwida, waqt li tiżgura li t-truf tat-tqattigħ iħarsu fid-direzzjoni korretta.
- Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
- Tighten the side cover knob slightly.
- Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
- Fully tighten the side cover knob.
Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.
4.4 Mili taż-Żejt tal-Katina
The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.
- Poġġi l-lupa fuq wiċċ livell.
- Unscrew the oil tank cap (refer to Image 4.4).
- Imla r-riżervwar b'żejt tal-katina u tal-virga ta' kwalità għolja. Tużax żejt użat jew żejt tal-magna.
- Ibdel l-għatu sew.
Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.
5. Istruzzjonijiet Operattivi
Follow these steps for safe and effective operation of your chainsaw.
5.1 Bidu u Waqfien
- Ensure batteries are installed and chain oil reservoir is full.
- Iddiżattiva l-brejk tal-katina billi tiġbed il-lieva lura lejn il-manku ta' quddiem.
- Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
- To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.
5.2 Tekniki tat-Tqattigħ
- Planning the Cut: Before cutting, assess the wood for stability, potential kickback, and pinch points.
- Nagħmlu l-Qatgħa: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
- Tqattigħ ta' Siġar Żgħar: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
- Limbing: Work from the bottom up, supporting the branch to prevent pinching.
Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tas-serrieq tal-katina tiegħek.
6.1 Aġġustament tat-Tensjoni tal-Katina
Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.
Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.
6.2 Lubrikazzjoni tal-Katina
The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.
Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.
6.3 Tindif u Ħażna
- After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
- Aħżen is-serrieq tal-katina f'post niexef u sigur, fejn ma jintlaħaqx mit-tfal.
- Always use the guide bar cover when storing or transporting the chainsaw.
7 Issolvi l-problemi
Din it-taqsima tindirizza kwistjonijiet komuni li tista’ tiltaqa’ magħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lupa ma tibda | Batteries not charged or improperly inserted; Chain brake engaged; Safety switch not pressed. | Charge and reinsert batteries; Disengage chain brake; Press safety lock-off button before trigger. |
| Katina ma tiċċaqlaqx | Chain brake engaged; Chain too tight; Obstruction. | Disengage chain brake; Adjust chain tension; Clear any obstructions. |
| Prestazzjoni fqira tat-tqattigħ | Katina matt; Tensjoni tal-katina mhux korretta; Żejt tal-katina insuffiċjenti. | Sharpen or replace chain; Adjust chain tension; Refill oil reservoir. |
| Vibrazzjoni eċċessiva | Katina maħlula; Katina jew vireg tal-gwida bil-ħsara. | Adjust chain tension; Inspect chain and guide bar for damage and replace if necessary. |
If problems persist, contact Einhell customer support or a qualified service technician.
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | GE-LC 36/35 Li Solo (4501780) |
| Sors tal-Enerġija | Battery Powered (2 x 18V Power X-Change batteries required for 36V operation) |
| Voltage | 36 Volts |
| Horsepower | 5 HP |
| Tul tal-Katina | 14 Pulzier |
| Veloċità tal-Katina | Approximately 15 m/s |
| Piż tal-oġġett | 3.94 Kilogrammi (8.67 libbra) |
| Manifattur | EINHELL |
Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.
9. Garanzija u Appoġġ
For warranty information, product registration, or technical support, please refer to the official Einhell webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Għal aktar għajnuna, żur il- Uffiċjal ta' Einhell websit.
