1. Introduzzjoni
This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your HECHT 135 BTS 2-stroke petrol brush cutter. Please read this manual thoroughly before using the equipment to ensure safe and efficient operation.
2. Istruzzjonijiet tas-Sigurtà
Operating a petrol brush cutter requires strict adherence to safety guidelines to prevent injury. Always prioritize your safety and the safety of others.
2.1 Tagħmir Protettiv Personali (PPE)
- Protezzjoni tal-għajnejn: Dejjem ilbes nuċċalijiet tas-sigurtà jew viżiera biex tipproteġi kontra debris li jtir.
- Protezzjoni tas-Smigħ: Use earplugs or earmuffs to prevent hearing damage from engine noise.
- Protezzjoni tal-Idejn: Wear sturdy work gloves to improve grip and protect hands.
- Protezzjoni tas-Saqajn: Wear non-slip, steel-toed boots or sturdy footwear.
- Protezzjoni tal-ġisem: Wear long pants and a long-sleeved shirt to protect skin from debris and sun. Avoid loose clothing that could get caught in moving parts.
2.2 Prekawzjonijiet Ġenerali tas-Sigurtà
- Aqra l-Manwal: Ifhem l-istruzzjonijiet u t-twissijiet kollha qabel l-operazzjoni.
- Area Inspection: Before starting, clear the work area of stones, metal objects, wires, and other debris that could be thrown or entangle the cutting head.
- Persuni li kienu preżenti: Keep all bystanders, children, and pets at a safe distance (at least 15 meters) from the operating area.
- Immaniġġjar tal-Fjuwil: Immaniġġja l-petrol b'attenzjoni kbira. Imla l-petrol f'żona ventilata sew bil-magna mitfija u ħalliha berred. Tpejjipx waqt li timla l-petrol.
- Saq Stabbli: Maintain firm footing and balance at all times. Do not overreach.
- Kundizzjonijiet tat-Temp: Do not operate in rain or wet conditions, or when visibility is poor.
- Għeja: Do not operate the brush cutter when tired, ill, or under the influence of alcohol or drugs.
- Manutenzjoni: Always turn off the engine and disconnect the spark plug before performing any maintenance, cleaning, or clearing blockages.
- Trasport: Transport the brush cutter with the engine off and the cutting attachment protected.
3. Kontenut tal-Pakkett
Upon unpacking your HECHT 135 BTS brush cutter, verify that all components are present and undamaged:
- 1x HECHT 135 BTS Petrol Brush Cutter unit
- 1x 3-tooth Metal Blade (255 mm cutting width)
- 1x Dual-line Spool Head (430 mm cutting width)
- 1x Ċinga ta 'l-Ispalla Aġġustabbli
- 1x Handlebar assembly
- 1x Cutting Guard
- 1x Tool Kit (for assembly and basic maintenance)
- 1x Manwal għall-Utent
4. Setup u Assemblea
Segwi dawn il-passi biex tiġbor il-brush cutter tiegħek qabel l-ewwel użu.
4.1 It-twaħħil tal-Manubriju
- Ħoll il-manubri clamp boltijiet fuq ix-xaft prinċipali.
- Position the handlebar onto the shaft at a comfortable working height and angle.
- Ensure all control cables are routed correctly and not pinched.
- Issikka l-clamp boltijiet sew.
4.2 Installing the Cutting Guard
- Slide the cutting guard onto the lower shaft, ensuring it is oriented correctly to protect against debris.
- Secure the guard with the provided screws or bolts. Do not operate the brush cutter without the guard properly installed.
4.3 Mounting the Cutting Head
Your HECHT 135 BTS comes with two interchangeable cutting heads: a 3-tooth metal blade and a dual-line spool head.
- Ensure the engine is off and the spark plug cap is removed.
- Insert the locking pin into the gearbox hole to prevent the shaft from rotating.
- For Metal Blade: Place the blade onto the shaft, ensuring it sits correctly on the support flange. Secure it with the washer and nut, tightening firmly (often left-hand thread).
- For Spool Head: Thread the spool head onto the shaft, turning clockwise until it is securely fastened.
- Neħħi l-pin tal-qfil.
4.4 It-twaħħil taċ-Ċinga tal-Ispalla
- Attach the shoulder strap to the designated hook or loop on the main shaft.
- Adjust the strap length so the cutting head is balanced and comfortable for your working posture, allowing for a slight bend in your arms.
4.5 Fueling the Brush Cutter
The HECHT 135 BTS uses a 2-stroke engine, requiring a specific petrol-oil mixture. Refer to the engine manufacturer's recommendations for the correct mixing ratio (typically 25:1 or 50:1, depending on the oil type).
- Use fresh, unleaded petrol and high-quality 2-stroke engine oil.
- Mix the fuel in a separate, approved fuel container.
- Kun żgur li l-magna tkun mitfija u berredha qabel ma timla l-fjuwil.
- Carefully pour the mixed fuel into the fuel tank (capacity 0.7 L), avoiding spills.
- Agħlaq sew l-għatu tal-fjuwil.
5. Istruzzjonijiet Operattivi
5.1 Tibda tal-Magna
- Poġġi l-cutter tal-brushes fuq wiċċ ċatt u stabbli.
- Set the ON/OFF switch to the 'ON' position.
- Ingaġġa ċ-ċowk (jekk il-magna tkun kiesħa).
- Agħfas il-bozza tal-primer diversi drabi sakemm il-fjuwil ikun viżibbli.
- Hold the brush cutter firmly with one hand on the handlebar and the other on the starter grip.
- Pull the starter cord slowly until resistance is felt, then pull sharply and quickly until the engine fires (usually 1-3 pulls).
- Once the engine fires, disengage the choke (if applicable).
- Ħalli l-magna tisħon għal ftit mumenti qabel ma tapplika l-aċċeleratur sħiħ.
5.2 Using the Brush Cutter
Hold the brush cutter firmly with both hands on the handlebar. Maintain a wide stance for balance. The shoulder strap should support the weight of the machine, allowing you to guide it with minimal effort.
- Teknika tal-Qtugħ: Use a sweeping motion from side to side. For dense growth, cut in smaller sections.
- Użu tax-Xafra: Ideal for thick weeds, brush, and small saplings. Be aware of kickback when using the blade.
- Spool Head Use: Best for grass, light weeds, and trimming around obstacles. Advance the line as needed by tapping the head on the ground (tap-and-go system) or manually.
- Maintain RPM: Operate at a consistent, high RPM for efficient cutting and to prevent engine strain.
- Evita l-ostakli: Do not strike hard objects like rocks, fences, or concrete with the cutting head.
5.3 Waqfien tal-Magna
- Release the throttle to allow the engine to idle.
- Move the ON/OFF switch to the 'OFF' position.
- Wait for all moving parts to come to a complete stop before setting the machine down.
6. Manutenzjoni
Regular maintenance ensures the longevity and safe operation of your HECHT 135 BTS brush cutter.
6.1 Wara Kull Użu
- Naddaf l-Unità: Remove grass, dirt, and debris from the engine, cutting head, and guard. Use a brush or compressed air.
- Inspect Cutting Head: Check the blade for sharpness and damage, or the line spool for wear and proper function. Replace or sharpen as needed.
- Iċċekkja l-Qafliet: Kun żgur li l-ġewż, il-boltijiet u l-viti kollha huma ssikkati.
6.2 Manutenzjoni Perjodika
- Filtru tal-Arja: Clean the air filter regularly (every 5-10 hours of operation, more often in dusty conditions). Wash foam filters in warm, soapy water, rinse, dry, and lightly oil. Replace paper filters if heavily soiled.
- Spark Plug: Inspect the spark plug every 20-30 hours. Clean carbon deposits and adjust the gap if necessary. Replace if electrodes are worn or damaged.
- Filtru tal-Fjuwil: Inspect and replace the fuel filter in the tank annually or if fuel flow issues occur.
- Lubrikazzjoni tal-Gearbox: Check and replenish the grease in the gearbox (at the cutting head end) as per manufacturer recommendations, typically every 25-50 hours.
- Xewk tat-Tkessiħ: Keep the engine's cooling fins clean to prevent overheating.
6.3 Ħażna
- Għal ħażna fit-tul, battal it-tank tal-fjuwil u ħaddem il-magna sakemm tieqaf biex tnaddaf il-fjuwil mill-karburatur.
- Clean the entire unit thoroughly.
- Store in a dry, well-ventilated area, away from direct sunlight and heat sources.
7 Issolvi l-problemi
Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bil-brush cutter tiegħek.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-magna ma tixgħelx | No fuel, incorrect choke, fouled spark plug, clogged fuel filter, old fuel. | Check fuel level and mixture. Adjust choke. Clean/replace spark plug. Clean/replace fuel filter. Use fresh fuel. |
| Telf ta 'enerġija waqt it-tħaddim | Clogged air filter, incorrect fuel mixture, dull cutting head, engine overheating. | Clean air filter. Verify fuel mixture. Sharpen/replace cutting head. Clean cooling fins. |
| Vibrazzjoni eċċessiva | Damaged or unbalanced cutting head, loose fasteners, bent shaft. | Inspect and replace damaged cutting head. Tighten all fasteners. If shaft is bent, seek professional service. |
| Il-linja tat-tqattigħ ma tavvanzax | Line tangled, insufficient line, incorrect spool installation. | Turn off engine, clear tangles, reload line, ensure spool is correctly installed. |
8. Speċifikazzjonijiet
Technical data for the HECHT 135 BTS Petrol Brush Cutter:
- Tip ta' Magna: 2-stroke, ċilindru wieħed
- Spostament: 33 ċm³
- Qawwa Rated: 0.9 kW / 1.2 HP
- Max. Engine Power: 1.1 kW / 1.5 HP
- Veloċità Rated tal-Magna: 6500 rpm
- Max. Veloċità tal-Magna: 13000 rpm
- Volum tat-Tank tal-Fjuwil: 0.7 L
- Blade Cutting Width: 255 mm (25.5 ċm)
- Line Cutting Width: 430 mm (43 ċm)
- Max. Line Thickness: 2.5 mm
- Max. Spool Head Speed: 8500 rpm
- Piż Nett: 6.1 kg
- Tul Totali: 1880 mm
- Wisa' Totali: 720 mm
- Għoli totali: 400 mm
9. Stampi tal-Prodott
Visual references for the HECHT 135 BTS Brush Cutter.
Deskrizzjoni tal-Immaġni: This is a placeholder image indicating 'No image available'. A typical product image would show the HECHT 135 BTS 2-stroke petrol brush cutter fully assembled, highlighting its handlebar, engine unit, and interchangeable cutting heads (3-tooth blade and line spool).
10. Garanzija u Appoġġ
For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
Note: Information regarding the availability of spare parts for this product is currently unavailable.
