COSTWAY 30" Swivel Bar Stools (Set of 4) Instruction Manual

1. Prodott Aktarview

The COSTWAY 30" Swivel Bar Stools are designed for comfort and durability, suitable for various settings such as kitchens, dining areas, pubs, and cafes. This set includes four bar stools with a vintage aesthetic, featuring a 360-degree swivel function and leather-padded seats.

• Steady and Stable Construction: Made of iron pipe, the frame is designed for strength and stability, supporting up to 250 lbs. Non-slip caps on the bottom protect floors and enhance stability.
• Considerate Craftsmanship: Features a built-in footrest for comfort and a 360-degree swivel seat for ease of movement and interaction.
• Retro and Vintage Outlook: The backrest features a vintage pattern, offering a classic and elegant design that complements various decor styles.
• Easy to Clean and Assemble: The finished surface is rust-proof and corrosion-resistant, allowing for easy cleaning with a damp cloth. Assembly is straightforward with included accessories and a manual.

2. Informazzjoni dwar is-Sigurtà

Jekk jogħġbok aqra u ifhem it-twissijiet kollha tas-sigurtà qabel l-assemblaġġ u l-użu.

• Kapaċità tal-piż: Do not exceed the maximum weight capacity of 250 lbs per stool. Exceeding this limit may result in damage or injury.
• Assemblea: Ensure all components are properly assembled and tightened before use. Regularly check and retighten screws as needed to maintain stability.
• Pjazzament: Always place the bar stool on a flat, stable surface to prevent tipping.
• Użu: Use caution when sitting down or standing up to avoid losing balance. Avoid leaning heavily on the backrest, especially if exceeding the weight limit.

3. Kontenut tal-Pakkett

Iċċekkja li l-partijiet kollha huma preżenti qabel tibda l-assemblaġġ. Jekk xi partijiet huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

• 4 x Bar Stool (disassembled components)
• 1 x Gwida għall-Utent
• Hardware Pack (screws, washers, Allen wrench, etc.)

4. Istruzzjonijiet tal-Assemblea

Assembly is required. Please follow these general steps. Refer to the included detailed manual for specific diagrams and part identification.

Figura 1: Dimensjonijiet tal-Prodott

1. Ħoll il-Komponenti: Neħħi l-partijiet kollha mill-imballaġġ bir-reqqa u poġġihom fuq wiċċ nadif u artab biex tevita l-grif.
2. Attach Legs to Base Ring: Connect the stool legs to the lower circular base ring using the provided screws and Allen wrench. Do not fully tighten yet.
3. Assemble Swivel Mechanism: Secure the swivel mechanism to the underside of the seat cushion. Ensure it is oriented correctly.
4. Attach Seat to Leg Assembly: Connect the assembled seat with the swivel mechanism to the top of the leg assembly. Align the screw holes and insert the screws.
5. Waħħal id-Dahar: Secure the backrest to the seat assembly using the designated screws.
6. Issikkar finali: Once all parts are loosely assembled, gradually tighten all screws evenly until secure. Do not overtighten.
7. Iċċekkja l-Istabbiltà: Gently rock the stool to ensure it is stable and does not wobble. Adjust screws if necessary.

Figure 2: Detail of Footrest and Base

Figure 3: Detail of Backrest Design

5. Istruzzjonijiet Operattivi

These bar stools are designed for straightforward use.

• Bilqiegħda: Approach the stool carefully and sit down gently. Avoid sudden movements.
• Funzjoni ta' Dawwar: The seat features a 360-degree swivel. To rotate, simply apply gentle pressure with your body in the desired direction.
• Sieq tas-saqajn: Utilize the built-in footrest for added comfort and support while seated.

Figure 4: Assembled Bar Stool

6. Kura u Manutenzjoni

Proper care will extend the life and appearance of your bar stools.

• Tindif: Wipe the faux leather seat and metal frame with a damp cloth. For stubborn stains on the faux leather, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Spezzjoni regolari: Iċċekkja l-viti u l-boltijiet kollha perjodikament biex tiżgura li huma ssikkati sew. Erġa' ssikkahom kif meħtieġ biex iżżomm l-integrità strutturali.
• Evita dawl tax-xemx dirett: Espożizzjoni fit-tul għad-dawl tax-xemx dirett tista' tikkawża li l-ġilda artifiċjali tisparixxi jew tixxaqqaq.
• Ipproteġi l-Artijiet: The non-slip caps on the feet are designed to protect your floors. Ensure they are intact and replace if damaged.

7 Issolvi l-problemi

If you encounter any issues with your bar stools, refer to the following common solutions.

• Stool Wobbles:
  Soluzzjoni: Ensure the stool is on a flat, even surface. Check all assembly screws and tighten them evenly. Sometimes loosening all screws slightly, sitting on the stool to settle the components, and then retightening can resolve wobbling.
• Swivel Mechanism is Stiff:
  Soluzzjoni: The swivel mechanism may require lubrication. Apply a small amount of silicone-based lubricant to the moving parts of the swivel plate.
• Partijiet maħlula:
  Soluzzjoni: Regularly inspect all nuts, bolts, and screws. Tighten any loose fasteners immediately to prevent further loosening or damage.

8. Speċifikazzjonijiet

Figure 5: Bar Stools in a Kitchen Environment

9. Garanzija u Appoġġ

This product comes with a standard return policy of 30 days for refund or replacement. For specific warranty details or further assistance, please refer to your purchase documentation or contact COSTWAY customer support.

Appoġġ għall-Klijent: For any questions, missing parts, or technical support, please visit the official COSTWAY website or contact their customer service department directly. Have your model number (HW54103-CYWH) and purchase date ready.