Manwal tal-Utent tad-Dawl PAR Audibax Orlando 162 Plus

1. Introduzzjoni

The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.

2. Informazzjoni dwar is-Sigurtà

• Sigurtà Elettrika: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
• Pjazzament: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
• Immaniġġjar: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
• Ambjent: This device is intended for indoor use only. Protect it from moisture and extreme temperatures.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti meta tiftaħ il-pakkett:

• Audibax Orlando 162 Plus PAR Light
• Bracket tal-Immuntar
• Kejbil tal-Enerġija
• Manwal għall-Utent

4. Prodott Aktarview

The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.

Figura 4.1: Quddiem view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.

Figura 4.2: Ġenb view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.

Panel tal-Kontroll u Konnessjonijiet

The rear panel provides access to the control interface and input/output connections.

Figura 4.3: Wara view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).

• Wirja Diġitali: Shows current mode and parameter settings.
• Buttuna MENU: Navigates through the main menu options.
• Buttuni UP/DOWN: Adjust parameter values or navigate menu items.
• Buttuna ENTER: Jikkonferma l-għażla.
• DMX IN/OUT: 3-pin XLR connectors for DMX signal connection.
• QAWWA FI: IEC power input for connecting the power cable.

5. Setup

5.1 Immuntar

1. Waħħal il-bracket tal-immuntar sew mal-apparat billi tuża l-viti pprovduti.
2. Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the fixture using the bracket's locking knobs.

5.2 Konnessjoni tal-Enerġija

1. Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
2. Plug the other end of the power cable into a suitable grounded power outlet.

5.3 Konnessjoni DMX (Mhux obbligatorja)

For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.

• Use standard 3-pin XLR DMX cables.
• Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.

6. Istruzzjonijiet Operattivi

Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.

6.1 Navigazzjoni tal-Menu

• Agħfas MENU to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
• Użu UP u 'L isfel to adjust values or select sub-options within a menu.
• Agħfas DĦUL to confirm your selection or save changes.

6.2 Modi Operattivi

The Orlando 162 Plus offers several operational modes:

• Modalità DMX: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
• Modalità Awtomatika: The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
• Modalità Attivata mill-Ħoss: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
• Modalità Kaptan/Skjav: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
• Modalità tal-Kulur Statiku: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
• Funzjoni Strobe: Activates a flashing light effect. This can often be adjusted for speed.

6.3 Color Examples

7. Manutenzjoni

• Tindif: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
• Spezzjoni: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
• Ħażna: When not in use, store the fixture in a dry, dust-free environment.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax websit jew ikkuntattja lin-negozjant lokali tiegħek.