Manwal ta' Istruzzjoni

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of the uxcell 2Pcs Red Indicator Light. This product is designed for use in various electrical control panels, HVAC systems, and DIY projects, providing clear visual indication of system status.

Figure 1.1: Two uxcell Red Indicator Lights. These lights are designed for panel mounting and provide a clear visual signal.

2. Karatteristiċi tal-prodott

• RED LED Indicators: Equipped with high-bright LED chips for clear visibility.
• Voltage Kompatibilità: Designed to operate with AC/DC 110 Volt power sources.
• Immuntar Standard: Features an industrial standard 22mm (7/8") mounting diameter for easy integration into panels.
• Disinn kompatt: Low behind-panel depth of 37mm (1.46") and includes a panel locking nut, suitable for panel thickness up to 6mm (0.24").
• Konnessjoni affidabbli: Utilizes screw-clamp connections to ensure firm and reliable electrical contact.
• Durabilità: Tested for over 20,000 hours of use, ensuring long-term stable performance.
• Applikazzjoni versatili: Ideal for use in marine applications, machine tools, industrial equipment, switch cabinets, power distribution cabinets, HVAC panels, electrical control panels, and DIY projects like PLC training.

Figure 2.1: Key features of the uxcell indicator light, including its model series (AD16-22D/S), LED technology, high brightness, and 22mm mounting hole.

3. Informazzjoni dwar is-Sigurtà

TWISSIJA: Periklu ta' Xokk Elettriku

• Always disconnect power before installing, servicing, or removing the indicator light.
• Installation should only be performed by qualified personnel in accordance with all local and national electrical codes.
• Tiżgura l-voltage rating of the indicator light (AC/DC 110V) matches the power supply.
• Taqbiżx il-vol speċifikattage jew klassifikazzjonijiet kurrenti.
• Avoid touching electrical terminals when power is applied.
• Ipproteġi l-apparat mill-umdità u t-temperaturi estremi.

4. Kontenut tal-Pakkett

Kull pakkett fih:

• 2 x uxcell Red Indicator Lights (Model: a18033000ux0500)
• 2 x Panel Locking Nuts

5. Speċifikazzjonijiet

Figure 5.1: Dimensional drawing of the uxcell indicator light, highlighting key measurements for installation.

Figure 5.2: Cross-sectional dimension diagram providing precise measurements for panel integration.

6. Setup u Installazzjoni

Follow these steps for proper installation of the indicator light:

1. Ipprepara l-Panel: Ensure the control panel has a clean, round hole with a diameter of 22mm (7/8"). The panel thickness should not exceed 6mm (0.24").
2. Insert Light: Insert the indicator light through the prepared hole from the front of the panel.
3. Waħħal bil-ġewż: From the back of the panel, thread the provided panel locking nut onto the indicator light's body and tighten it securely to hold the light in place.
4. Konnessjonijiet tal-Wajer: Identify the two screw-clamp terminals on the back of the indicator light. Connect your AC/DC 110V power wires to these terminals. Ensure connections are firm and secure to prevent loose contacts.
5. Dust Cap (Optional): If desired, attach the dust cap to the rear of the indicator light to protect the terminals from dust and debris.

Figura 6.1: View of the LED module and terminal connections, showing the internal components.

Figure 6.2: The dust cap and terminal area, illustrating how the cap protects against environmental elements.

7. Istruzzjonijiet Operattivi

The uxcell Red Indicator Light operates automatically once correctly installed and connected to a compatible power source.

1. Qawwa Mixgħul: Apply AC/DC 110V power to the connected terminals of the indicator light.
2. Indikazzjoni: The red LED will illuminate, providing a clear visual signal that power is present or a specific circuit/device is active.
3. Itfi: When power is removed from the terminals, the LED will turn off. Note that due to the nature of LED components, there might be a slight, gradual fade-out rather than an instantaneous turn-off. This is normal operation and does not affect performance.

Figure 7.1: The uxcell Red Indicator Light in operation, demonstrating its illuminated state.

8. Manutenzjoni

The uxcell Red Indicator Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

• Tindif: Gently wipe the surface of the indicator light with a soft, dry cloth to remove dust or dirt. Do not use abrasive cleaners or solvents.
• Spezzjoni tat-Terminal: Periodically check the screw-clamp connections at the rear of the light to ensure they remain tight and secure. Loose connections can lead to intermittent operation or overheating.
• Kap tat-Trab: Ensure the dust cap (if installed) is properly seated to protect the terminals from environmental contaminants.
• Kontroll tal-Ħsara: Inspect the light for any signs of physical damage, such as cracks in the lens or housing. Replace the unit if damage is observed.

9 Issolvi l-problemi

10. Garanzija u Appoġġ

For information regarding warranty, returns, or technical support, please contact uxcell customer service directly through their official channels or the retailer from whom the product was purchased. Please have your model number (a18033000ux0500) and purchase details ready when contacting support.

You can visit the uxcell store for more information: uxcell Official Store