Nerf E2901

Manwal tal-Utent tan-Nerf Rival Hypnos XIX-1200 Blaster

Ditta: Nerf | Mudell: XIX-1200 (E2901)

1. Informazzjoni Importanti dwar is-Sigurtà

Please read all instructions before using the Nerf Rival Hypnos XIX-1200 blaster. Failure to follow safety warnings and instructions may result in injury.

2. Prodott Aktarview

The Nerf Rival Hypnos XIX-1200 blaster is designed for intense Nerf Rival competitions, offering a blend of customization, portability, and rapid firing capabilities. It features a unique folding stock and comes with multiple magazines for quick reloading.

Nerf Rival Hypnos XIX-1200 Blaster with two magazines and 24 high-impact rounds

Figure 2.1: The Nerf Rival Hypnos XIX-1200 blaster, showcasing its main components including the blaster itself, two 12-round magazines, and 24 high-impact rounds.

Karatteristiċi ewlenin:

3. X'inhu Inkluż

Your Nerf Rival Hypnos XIX-1200 package should contain the following items:

Packaging box for Nerf Rival Hypnos XIX-1200 Blaster

Figure 3.1: The product packaging, indicating the contents and key features of the Nerf Rival Hypnos XIX-1200 blaster.

4. Setup

4.1 Loading the Magazines

  1. Hold the 12-round magazine with the orange end facing up.
  2. Insert the high-impact rounds one by one into the top opening of the magazine, pushing them down until they are fully seated. Ensure the rounds are inserted correctly to prevent jamming.
  3. Fill the magazine with up to 12 rounds.
Hands loading high-impact rounds into a clear 12-round magazine

Figure 4.1: Demonstrates the process of loading high-impact rounds into the 12-round magazine.

4.2 Inserting the Magazine into the Blaster

  1. Locate the magazine well on the underside of the blaster.
  2. Insert a loaded 12-round magazine into the magazine well until it clicks securely into place.
  3. You can store the second loaded magazine on the tactical rail using the provided clips for quick access.
Hand inserting a loaded magazine into the Nerf Rival Hypnos blaster

Figure 4.2: Shows a hand inserting a loaded magazine into the blaster's magazine well.

4.3 Folding and Unfolding the Stock

  1. To fold the stock, locate the stock release button near the rear of the blaster.
  2. Press the stock release button and fold the stock to the side of the blaster until it locks into its compact position.
  3. To unfold, press the stock release button again and extend the stock until it clicks into its fully extended position.
Close-up of a hand pressing the stock release button on the Nerf Rival Hypnos blaster

Figure 4.3: Illustrates the location of the stock release button and the action of folding the stock.

5. Istruzzjonijiet Operattivi

5.1 L-Ipprajmjar tal-Blaster

  1. Ensure a loaded magazine is securely inserted into the blaster.
  2. Grasp the pump handle located at the front of the blaster.
  3. Move the pump handle fully backward, then fully forward in a smooth, deliberate motion. This action primes the blaster and loads a round into the firing chamber.
Person holding the Nerf Rival Hypnos blaster, ready to prime

Figure 5.1: A user holding the blaster, demonstrating the ready position for priming.

5.2 Firing the Blaster

  1. After priming the blaster, ensure the trigger lock is disengaged (see Section 5.3).
  2. Aim at your target, ensuring no eyes or faces are in the line of fire.
  3. Pull the trigger to unleash a high-impact round.
Person wearing eye protection and holding the Nerf Rival Hypnos blaster, aiming

Figure 5.2: A user demonstrating proper handling and aiming of the blaster with eye protection.

5.3 L-Użu tat-Trigger Lock

The trigger lock prevents accidental firing.

Close-up of a hand engaging the trigger lock on the Nerf Rival Hypnos blaster

Figura 5.3: Dettaljata view of the trigger lock mechanism and its operation.

5.4 Reloading During Play

When a magazine is empty, you can quickly reload using the second magazine stored on the tactical rail.

  1. To remove an empty magazine, locate the magazine release button/lever and activate it. Pull the empty magazine out of the blaster.
  2. Grab the pre-loaded second magazine from the tactical rail and insert it into the blaster's magazine well until it clicks into place.

6. Manutenzjoni

Proper maintenance will ensure the longevity and optimal performance of your Nerf Rival Hypnos XIX-1200 blaster.

7 Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Blaster not firing or misfiring.
  • Trigger lock engaged.
  • Blaster not fully primed.
  • Magazine not properly inserted.
  • Damaged or non-official rounds.
  • Disengage trigger lock.
  • Ensure pump handle is moved fully backward and then fully forward.
  • Re-insert magazine until it clicks.
  • Use only official Nerf Rival rounds; replace damaged rounds.
Rounds firing with low velocity.
  • Incomplete priming action.
  • Worn or damaged rounds.
  • Ensure the pump handle is moved with a full, deliberate motion.
  • Replace old or damaged rounds with new, official Nerf Rival rounds.
Magazine jams or rounds pop out.
  • Improperly loaded magazine.
  • Using non-official rounds.
  • Magazine not fully seated.
  • Ensure rounds are inserted correctly and fully seated.
  • Use only official Nerf Rival rounds.
  • Push magazine firmly until it clicks into place.

8. Speċifikazzjonijiet

AttributDettall
Dimensjonijiet tal-Prodott3 x 30 x 12 pulzieri
Piż tal-oġġett2.79 liri
Numru tal-MudellE2901 (XIX-1200)
Età Rakkomandata mill-Manifattur14 snin 'il fuq
Data ta' Rilaxx1 ta’ Jannar, 2019
ManifatturHasbro
Round Capacity12 rounds per magazine (2 magazines included)
Veloċità tal-geddum100 feet per second (30 meters per second)

9. Garanzija u Appoġġ

For information regarding warranty coverage, product support, or replacement parts, please refer to the documentation included with your product or visit the official Nerf website. You can also visit the official Nerf store on Amazon for additional products and information.

Official Nerf Store: https://www.amazon.com/stores/NERF/page/25BD06DA-67EB-46E3-B5DE-82B3CB88F7A3

Dokumenti Relatati - E2901

Preview Nerf Hyper MACH-100 Blaster: Istruzzjonijiet dwar l-Operazzjoni u s-Sigurtà
Gwida komprensiva għall-blaster Nerf Hyper MACH-100, li tiddeskrivi kif tgħabbi, tispara, tneħħi l-imblukkar tal-isparar, taħżen il-blaster, u prekawzjonijiet importanti ta' sigurtà. Tinkludi informazzjoni dwar il-batterija u l-kompatibilità tal-prodott.
Preview Nerf N-Strike Elite Strongarm Blaster: Gwida għall-Utent
Istruzzjonijiet uffiċjali għall-blaster tal-ġugarelli Nerf N-Strike Elite Strongarm. Tgħallem kif tgħabbi d-darts, tispara tiri singoli, u tuża l-karatteristika slam-fire għal sparar rapidu. Jinkludi twissijiet ta' sigurtà u dettalji tal-prodott.
Preview NERF Modulus Ghost Ops Evader Blaster: Gwida għall-Assemblaġġ, l-Operazzjoni, u s-Sigurtà
Gwida komprensiva għall-blaster NERF Modulus Ghost Ops Evader, li tkopri l-assemblaġġ, it-tagħbija, l-isparar, is-sostituzzjoni tal-batterija, u twissijiet importanti ta' sigurtà. Tgħallem kif tħaddem il-blaster NERF tiegħek b'mod effettiv u sikur.
Preview Nerf Fortnite AR-L Blaster: Istruzzjonijiet u Karatteristiċi
Dan id-dokument jipprovdi struzzjonijiet u dettalji għan-Nerf Fortnite AR-L Blaster, inkluż kif tneħħi l-imblukkar tal-blaster, iddaħħal il-batteriji, tgħabbi u tispara d-darts, u taħżen il-blaster. Jinkludi appoġġ multilingwi u jenfasizza komponenti ewlenin bħat-trigger, il-mira flip-up, il-binarju tattiku, u l-buttuna tal-aċċelerazzjoni.
Preview NERF Modulus Mediator Blaster: Assembly, Operation, and Safety Guide
Comprehensive guide for the NERF Modulus Mediator blaster, covering assembly, loading, firing, slam-fire, reloading, troubleshooting jams, and important safety warnings. Includes parts identification and connection to the NERF community.
Preview Mod Nerf Stryfe Ultimate: Gwida għall-Kontroll tal-Veloċità DIY u l-Aġġornament tal-LED
Gwida komprensiva dwar kif timmodifika n-Nerf Stryfe blaster tiegħek, tippermetti kontroll tal-veloċità tal-mutur apposta, iżżid indikaturi LED, u ttejjeb il-prestazzjoni ġenerali tiegħu. Dan il-proġett DIY jagħti dettalji dwar iż-żarmar, l-alterazzjoni, iż-żebgħa, l-integrazzjoni tal-elettronika, u l-assemblaġġ mill-ġdid.