Introduzzjoni
This manual provides essential information for the safe and efficient installation and operation of your Clarion 550 Watts SMPS JM-PS-620. Please read this manual thoroughly before installation and retain it for future reference.
Stampa 1: Quddiem view of the Clarion 550 Watts SMPS JM-PS-620, showing the cooling fan and power input.
Prekawzjonijiet tas-Sigurtà
Always observe the following safety guidelines to prevent injury or damage to the product and connected components:
- Tiftaħx l-unità tal-provvista tal-enerġija casing. Volum għolitages huma preżenti ġewwa.
- Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.
- Do not operate the SMPS in wet or damp kundizzjonijiet.
- Ensure the power supply is disconnected from the mains before installation or removal.
- This unit is designed for use with personal computers. Do not use it for other applications.
Image 2: Rear label of the Clarion JM-PS-620 showing electrical specifications and critical safety warnings regarding electric shock.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Clarion 550 Watts SMPS JM-PS-620 Unit
- Kejbil tal-Enerġija AC
Gwida għall-Installazzjoni
Follow these steps to install the SMPS into your computer system:
- Ipprepara s-Sistema Tiegħek: Kun żgur li l-kompjuter tiegħek huwa mitfi u skonnettjat mill-plakka tal-ħajt. Iftaħ il-kaxxa tal-kompjuter tiegħek.
- Neħħi l-PSU l-Qadim (jekk applikabbli): Disconnect all cables from the old power supply. Unscrew and remove the old unit.
- Mount the New SMPS: Carefully place the Clarion JM-PS-620 into the power supply bay of your computer case. Secure it with screws.
- Qabbad il-Qawwa Prinċipali: Connect the 20+4 Pin ATX connector to your motherboard.
- Qabbad il-Qawwa tas-CPU: Connect the 4+4 Pin CPU connector to your motherboard's CPU power socket.
- Ikkonnettja l-Periferali:
- Connect SATA power connectors to your hard drives, SSDs, and optical drives.
- Connect MOLEX connectors to compatible devices (e.g., older fans, certain peripherals).
- Connect the PCI-e 6-pin connector to your graphics card if required.
- Ġestjoni tal-Kejbil: Route cables neatly to ensure proper airflow within the case.
- Agħlaq il-Kaxxa u Ixgħelha: Close your computer case, plug in the AC power cable, and power on your system.
Immaġni 3: Fuqview of the Clarion JM-PS-620's various power connectors, including MB 20+4 Pin, CPU 4+4, PCI-e 6, SATA, and MOLEX, essential for system component connections.
Istruzzjonijiet Operattivi
The Clarion JM-PS-620 operates automatically once installed and connected. It provides stable power to your system components. No user intervention is typically required during operation.
- Ensure adequate ventilation around your computer case to prevent overheating.
- The 12cm silent fan will adjust its speed based on internal temperature to maintain optimal cooling.
Manutenzjoni
Minimal maintenance is required for the Clarion JM-PS-620:
- Tindif: Periodically clean dust from the exterior of the power supply and the computer case vents using compressed air. Ensure the system is powered off and unplugged before cleaning.
- Spezzjoni: Occasionally inspect cables for any signs of wear or damage. Replace any damaged cables immediately.
Issolvi l-problemi
If you encounter issues with your Clarion JM-PS-620, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-sistema ma tixgħel. | Konnessjoni tal-kejbil tal-enerġija maħlula. Is-swiċċ tal-PSU huwa mitfi. Żbokk tal-elettriku difettuż. Ċirkwit qasir intern. | Iċċekkja l-konnessjonijiet kollha tal-enerġija. Kun żgur li s-swiċċ tal-PSU jkun fil-pożizzjoni 'ON'. Ittestja l-iżbokk b'apparat ieħor. Disconnect non-essential components to isolate the issue. If problem persists, seek professional assistance. |
| Is-sistema tixgħel iżda tintefa immedjatament. | Overload or short circuit protection triggered. Wat insuffiċjentitage for components. | Verify all connections are secure and correct. Ensure total power draw of components does not exceed 550W. Remove non-essential components to test. |
| Unusual noise from the PSU. | Dust accumulation in fan. Funzjonament ħażin tal-fann. | Clean the fan area with compressed air (system off and unplugged). If noise persists, contact support. |
Speċifikazzjonijiet
Detailed technical specifications for the Clarion 550 Watts SMPS JM-PS-620:
- Mudell: JM-PS-620
- Tip: SMPS (Provvista tal-Enerġija tal-Modalità Swiċċ)
- Wattage: 550 Watts
- Materjal: Metall
- Konformità: ATX12V V2.2
- Appoġġ għall-proċessur: Intel & AMD Dual & Multi Core Processors
- Tkessiħ: 12cm Silent Fan, Black Case
- Karatteristiċi ta' Protezzjoni:
- Vol-żejjedtage Protezzjoni
- Protezzjoni ta 'kurrent żejjed
- Protezzjoni Short Circuit
- Protezzjoni tal-Fjus tal-Input
- Resettable Power Shut Down
- Protezzjoni Sħiħa
- Konnetturi:
- MB 20+4 Pin: 1
- CPU 4+4 Pin: 1
- PCI-e 6 Pin: 1
- SATA: 3
- MOLEX Compatible: 2
- Prodott DC:
- +5V: 25A
- +3.3V: 24A
- +12V1: 16A
- +12V2: 16A
- -12V: 0.5A
- +5VSB: 2A
- Kundizzjonijiet Operattivi: 100% Burn-in Under High Ambient Temperature
- Dimensjonijiet: Madwar 22 x 16 x 9.5 ċm
- Piż: Madwar 1.5 kg
Image 4: Packaging of the Clarion JM-PS-620 highlighting key specifications and features such as ATX12V V2.2 compliance, support for Intel and AMD processors, and integrated protection systems.
Garanzija u Appoġġ
For warranty information and technical support, please refer to the documentation provided with your purchase or contact Clarion customer service. Keep your purchase receipt as proof of purchase.
Note: The product description mentions "Over-voltage, over-current, and short circuit protection provided which gives safety to your system components." and "Output Over Voltage Protection, Input Fuse Protection, Resettable Power Shut Down, Full Protection". These are integrated safety features.
