Manwal tal-Istruzzjonijiet tas-Sistema tal-Modulu ta' Firxa Twila FrSky R9M 2019 900MHz

1. Introduzzjoni

The FrSky R9M 2019 is a 900MHz long-range module designed for use with FrSky R9 series receivers. This system provides extended operating range, low latency, and high precision for remote control applications. The R9M module offers switchable RF power outputs to adapt to various flight situations and supports telemetry data transmission via Smart Port.

This manual provides essential information for the proper setup, operation, and maintenance of your FrSky R9M 2019 module.

2. Karatteristiċi

• 900MHz/868MHz operating frequency.
• Compatible with FrSky R9 series receivers (ACCST/ACCESS protocols).
• Offers long-range, low-latency, and high-precision control.
• Features 4 optional RF power outputs (Non-EU Version).
• Supports Telemetry mode (25mW) and non-telemetry mode (200mW / 500mW) (EU Version).
• Flexible RF Power (Flex version): 10mW/ 100mW/ 500mW/ 1W (telemetry supported for all levels).
• Smart Port enabled for telemetry data transmission and firmware upgrades.
• Input VoltagFirxa: 6.5V-13V.
• Supports PXX or CPPM modulations (auto-detected).

3. Speċifikazzjonijiet

RF Power Output Details

Image: Detailed specifications including RF power, operating voltage/current, and number of channels for Non-LBT and LBT versions.

4. Setup

4.1 Identifikazzjoni tal-Komponent

Image: Labeled diagram showing Smart Port, RS232 Serial Port, Switch 1, Switch 2, Function Button, External Power Supply Port, RX, TX, Vin, GND, and S.Port connections on the R9M 2019 module.

4.2 Konnessjoni Inizjali

1. Ensure your FrSky R9M 2019 module is securely inserted into the external module bay of your compatible FrSky transmitter.
2. Connect the R9 series receiver to your aircraft's flight controller or servos as per your aircraft's requirements.
3. Connect the external power supply (6.5V-13V) to the R9M module if required by your transmitter or desired for higher RF power output.
4. Ixgħel it-trasmettitur tiegħek.

4.3 Proċedura vinkolanti

To establish a connection between the R9M module and an R9 series receiver, a binding procedure is necessary. Refer to your specific R9 series receiver manual for detailed binding instructions, as steps may vary slightly depending on the receiver model and firmware (ACCST/ACCESS).

Generally, the process involves putting both the transmitter (with R9M module) and the receiver into bind mode. The R9M module typically has a bind button or a menu option on the transmitter to initiate binding.

4.4 Aġġornamenti tal-Firmware

The R9M module and R9 series receivers may require firmware updates for optimal performance and compatibility. Firmware updates are performed via the Smart Port interface. Visit the official FrSky website for the latest firmware versions and detailed update procedures.

5. Istruzzjonijiet Operattivi

5.1 RF Power Selection

The R9M module allows selection of different RF power outputs. This is typically configured through your transmitter's menu system. Choose an appropriate power level based on your flight environment and range requirements. Higher power levels provide greater range but consume more battery power.

For EU LBT versions, available modes include Telemetry (25mW) and non-telemetry (200mW / 500mW). For Flex versions, options include 10mW, 100mW, 500mW, and 1W, all supporting telemetry.

5.2 Telemetry Functionality

The R9M system supports telemetry, allowing real-time feedback of flight data (e.g., battery voltage, RSSI) to your transmitter. Ensure your R9 series receiver and R9M module are configured for telemetry and that any necessary sensors are connected to the Smart Port.

The following video demonstrates how to display airplane battery voltage telemetry on a compatible RadioLink AT9S Pro transmitter, which uses a similar telemetry concept:

5.3 Simulator Use

The R9M module can be used with flight simulators for practice. This typically involves connecting your transmitter to a computer via a USB dongle or simulator cable. Ensure your transmitter is set to the correct mode for simulator use.

The following video demonstrates the plug-and-play setup for a RadioLink AT9S Pro transmitter with a simulator, which can be adapted for the FrSky R9M system:

6. Kompatibilità

The FrSky R9M 2019 module is compatible with FrSky R9 series receivers. It supports both ACCST and ACCESS protocols. Ensure that your transmitter's firmware and receiver's firmware are compatible with the chosen protocol.

6.1 Transmitter Compatibility

The R9M 2019 module is designed to work with FrSky transmitters that have an external module bay. Examples jinkludu:

• X9D Plus / SE 2019
• Q X7 ACCESS / Q X7S ACCESS
• X10 / X10S Express
• X12S
• X9E

For a detailed compatibility matrix, refer to the image below:

Image: A table detailing compatibility between different FrSky transmitters (X9D Plus, Q X7, X10, X12S, X9E, X-Lite series) and various R9M module versions (R9M 2019 ACCESS, R9M 2019 ACCST, R9M Lite, R9M Lite Pro).

7. Manutenzjoni

• Aġġornamenti tal-Firmware: Regularly check the FrSky website for the latest firmware updates for both your R9M module and R9 series receivers to ensure optimal performance and access to new features.
• Spezzjoni Fiżika: Periodically inspect the module and its connections for any signs of wear, damage, or loose contacts.
• Ħażna: Aħżen il-modulu f'ambjent niexef u frisk 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Tindif: Use a soft, dry cloth to clean the module. Avoid using solvents or abrasive cleaners.

8 Issolvi l-problemi

• L-ebda Kwistjonijiet ta' Link/Binding:
  • Ensure both transmitter and receiver are powered on and in bind mode.
  • Verify that the R9M module and receiver are running compatible firmware versions (ACCST/ACCESS).
  • Check for proper connection of the R9M module to the transmitter's external module bay.
  • Ensure the receiver is correctly connected to its power source.
• L-ebda Dejta tat-Telemetrija:
  • Confirm that telemetry is enabled in your transmitter settings.
  • Verify that the receiver is a telemetry-capable R9 series receiver.
  • Check all Smart Port connections for proper wiring.
  • Ensure any external telemetry sensors are correctly connected and configured.
• Firxa Mnaqqsa:
  • Check the selected RF power output on your transmitter; ensure it is set to an appropriate level for your flight conditions.
  • Inspect antennas on both the transmitter and receiver for damage or improper orientation.
  • Avoid flying in areas with high RF interference.

9. Garanzija u Appoġġ

For warranty information, technical support, and further assistance, please visit the official FrSky webis-sit jew ikkuntattja lin-negozjant awtorizzat ta' FrSky tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Official FrSky Websit: www.frsky-rc.com