Introduzzjoni
Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.
Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.
Informazzjoni dwar is-Sigurtà
Jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin waqt l-installazzjoni u t-tħaddim:
- TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-fjuż jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
- Tiżgura l-provvista voltage is compatible with the fixture's requirements (100-277V AC).
- Timmaniġġjax l-apparat b'idejn imxarrbin jew meta tkun wieqaf fuq wiċċ imxarrab jew artab.amp uċuħ.
- This fixture is designed for outdoor use and is IP65 rated for wet locations.
- Do not attempt to modify or disassemble the fixture beyond what is described in this manual.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
- Photocell (pre-installed)
- Non-photocell cover (for disabling photocell function)
- Ħardwer tal-immuntar (viti, ġewż tal-wajer)
- Manwal ta' Istruzzjoni
Karatteristiċi tal-Prodott
- Effiċjenti fl-Enerġija: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
- Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
- Kap aġġustabbli: Fixture angle can be adjusted 0-90 degrees for precise light direction.
- Kostruzzjoni Durabbli: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
- Ħajja twila: Maintenance-free LEDs with 50,000 hours of life.
Setup u Installazzjoni
Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.
1. Immuntar tal-Apparat
- Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
- Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
- Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.
Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.
2. Konnessjonijiet tal-Wiring
- Connect the fixture's black wire to the supply's live/hot wire.
- Connect the fixture's white wire to the supply's neutral wire.
- Connect the fixture's green/ground wire to the supply's ground wire.
- Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
- B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-junction.
3. L-Assigurazzjoni tal-Apparat
- Attach the fixture body to the mounted plate, ensuring it is securely hinged.
- Close the fixture and tighten any securing screws to ensure a watertight seal.
Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.
4. Photocell Configuration (Optional)
The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.
- To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
- Pull out the existing photocell.
- Screw in the non-photocell cover into the opening.
- Erġa' għaqqad il-lamp akkomodazzjoni.
Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.
Istruzzjonijiet Operattivi
Operazzjoni ta 'Photocell
If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.
Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.
L-aġġustament tar-Ras tad-Dawl
The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.
Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.
Manutenzjoni
The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.
- Tindif: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
- Spezzjoni: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- L-LEDs huma integrati u ma jistgħux jiġu sostitwiti mill-utent.
Issolvi l-problemi
If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx | Ebda provvista ta 'enerġija Wiring difettuż Photocell malfunction (if installed) | Iċċekkja s-circuit breaker u l-konnessjonijiet tal-enerġija. Iċċekkja li l-konnessjonijiet tal-wajers huma siguri. Ensure photocell is not obstructed or try replacing it with the non-photocell cover to test. |
| Id-dawl jibqa' mixgħul matul il-ġurnata | Photocell obstructed or receiving insufficient light Fotokellula ħażina | Clear any obstructions from the photocell. Ensure it is exposed to natural daylight. Test with the non-photocell cover. |
| Teptip ħafif | Konnessjoni tal-wajers sfużi Voltagvarjazzjonijiet | Iċċekkja u waħħal il-konnessjonijiet tal-wajers kollha. Consult a qualified electrician to check power supply stability. |
Speċifikazzjonijiet
Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.
| Attribut | Valur |
|---|---|
| Brand | DAKASON |
| Numru tal-Mudell | WP-30D-50 |
| Wattage | 30 Watts |
| Luminożità | 3300 Lumens |
| Temperatura tal-Kulur | 5000 Kelvin (abjad kiesaħ) |
| Voltage | 100-277 Volt (AC) |
| Materjal | Aluminju fondut bil-die, Ħġieġ ittemprat |
| Dimensjonijiet (L x W x H) | 6.6" x 7.9" x 4.3" |
| Piż tal-oġġett | 4 Liri |
| Klassifikazzjoni tal-IP | IP65 (Li ma jgħaddix ilma) |
| Karatteristiċi Speċjali | Dusk-to-Dawn Photocell, Adjustable Head, Full Cut-Off, Instant On, Not Dimmable, Shatter Resistant |
| Ċertifikazzjonijiet | ETL Elenkat |
| UPC | 766832159971 |
Informazzjoni dwar Garanzija
This DAKASON LED Wall Pack comes with a garanzija ta 'sena. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.
Appoġġ għall-Klijent
For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.
