Introduzzjoni
This manual provides essential information for the proper installation, operation, and maintenance of the Jet Tech 98-0840 Element. This 8KW, 208V heating element is a genuine OEM replacement part designed for use in Jet Tech commercial dishwashers, including undercounter, conveyor, door type, and glass washers. Adhering to these instructions will ensure the safety, reliability, and optimal performance of your equipment.
Informazzjoni dwar is-Sigurtà
Always prioritize safety when handling electrical components. Failure to follow these safety guidelines may result in electric shock, fire, or damage to equipment.
- Disconnect power to the appliance before attempting any installation, maintenance, or repair.
- Only qualified and authorized personnel should perform installation and service.
- Ilbes tagħmir protettiv personali (PPE) xieraq, bħal ingwanti iżolati u nuċċalijiet tas-sigurtà.
- Kun żgur li l-konnessjonijiet elettriċi kollha huma siguri u jikkonformaw mal-kodiċijiet elettriċi lokali.
- Do not operate the appliance if the element or wiring appears damaged.
Prodott Overview
The Jet Tech 98-0840 heating element is a critical component responsible for heating water within commercial dishwashers. It features multiple heating rods extending from a mounting flange, designed for efficient heat transfer.
Figura 1: Jet Tech 98-0840 Element. This image displays the heating element, showing its multiple heating rods and the mounting flange with connection points.
Installazzjoni (Setup)
This section outlines the general steps for replacing or installing the heating element. Refer to your specific dishwasher model's service manual for detailed instructions and diagrams.
- Skonnettjar tal-Enerġija: Ensure the dishwasher is completely disconnected from its power source. Verify with a voltagtester.
- Tneħħija tal-Panel tal-Aċċess: Locate and remove the access panels or covers that provide access to the heating element compartment.
- Ixxotta l-Ilma: If necessary, drain any water from the dishwasher tank to prevent spillage during element removal.
- Skonnettja l-Wiring: Carefully label and disconnect the electrical wiring from the old heating element. Note the position of each wire.
- Neħħi l-Element Qadim: Loosen any retaining nuts or clamps securing the old element and carefully withdraw it from its housing.
- Installa Element Ġdid: Insert the new Jet Tech 98-0840 element into the housing, ensuring the gasket (if applicable) is properly seated to prevent leaks. Secure it with retaining nuts or clamps.
- Erġa' qabbad il-wajers: Reconnect the electrical wiring to the new element according to the labels made during disconnection. Ensure all connections are tight and secure.
- Replace Panels: Erġa' installa l-pannelli u l-għotjien tal-aċċess kollha.
- Test: Restore power to the dishwasher and perform a test cycle to ensure the new element heats water correctly and there are no leaks.
Operazzjoni
The 98-0840 element operates automatically as part of the dishwasher's heating system. Once installed, its function is integrated into the dishwasher's normal operation cycle. Ensure the dishwasher is filled with water to the appropriate level before starting any cycle that requires heating, to prevent dry-firing the element.
Manutenzjoni
Regular maintenance helps prolong the life of the heating element and ensures efficient operation of the dishwasher.
- Inspect for Scale Buildup: Periodically inspect the element for mineral scale buildup, especially in hard water areas. Scale can reduce heating efficiency and lead to premature element failure.
- Tneħħija tal-Ġebla: If scale is present, follow the dishwasher manufacturer's recommendations for descaling procedures. This often involves using commercial descaling agents.
- Iċċekkja l-Konnessjonijiet: During routine maintenance of the dishwasher, verify that the electrical connections to the element remain tight and free from corrosion.
- Kwalità tal-Ilma: Maintain proper water quality and use recommended detergents to minimize scale formation.
Issolvi l-problemi
If the dishwasher is not heating water, the heating element may be the cause. Always ensure power is disconnected before performing any checks.
| Sintomu | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ilma mhux tisħin | Element ta 'tisħin difettuż | Test element for continuity with a multimeter. Replace if open circuit. |
| Ilma mhux tisħin | Tripped circuit breaker/blown fuse | Check and reset circuit breaker or replace fuse. Investigate cause of trip. |
| Ilma mhux tisħin | Konnessjonijiet tal-wajers maħlula jew imsadda | Inspect and tighten all electrical connections to the element. |
| Excessive scale buildup on element | Hard water or improper descaling | Perform descaling procedure. Consider water softening solutions. |
Jekk il-passi għas-soluzzjoni tal-problemi ma jsolvux il-problema, ikkuntattja tekniku tas-servizz kwalifikat.
Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Numru tal-Mudell | 98-0840 |
| Klassifikazzjoni tal-Qawwa | 8 KW |
| Voltage | 208V |
| Brand | Jet Tech |
| Tip ta' Parti | Parti ta' Sostituzzjoni Ġenwina tal-OEM |
| Pajjiż ta' Oriġini | l-Italja |
| Dimensjonijiet Approssimattivi tal-Pakkett | 25.2 x 7.2 x 7.2 pulzieri |
| Piż Approssimattiv tal-Oġġett | 1.1 Liri |
Garanzija u Appoġġ
For information regarding warranty coverage or technical support for the Jet Tech 98-0840 Element, please contact Jet Tech directly or refer to the documentation provided with your specific Jet Tech dishwasher model. Use of genuine OEM parts ensures continued warranty validity for your appliance.
Manifattur: Jet Tech
ASIN: B07CTS5YDJ