Manwal tal-Utent tar-Radju Diġitali SKYTECH ST-194D

1. Introduzzjoni

Grazzi tax-xiriasing the SKYTECH ST-194D Digital Radio. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new radio. Please read this manual thoroughly before using the device to ensure optimal performance and longevity. Keep this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

Biex tiżgura tħaddim sikur u tevita ħsara, jekk jogħġbok osserva l-prekawzjonijiet li ġejjin:

• Do not expose the radio to extreme temperatures, direct sunlight, or high humidity.
• Evita li twaqqa’ jew tissuġġetta l-apparat għal impatti qawwija.
• Do not attempt to disassemble or modify the radio. This will void the warranty and may cause damage.
• Use only the specified battery type (if applicable) and ensure correct polarity during installation.
• Żomm l-apparat 'il bogħod mill-ilma jew likwidi oħra.
• Naddaf ir-radju b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• SKYTECH ST-194D Digital Radio
• Manwal għall-Utent (dan id-dokument)

Note: Batteries may not be included and might need to be purchased separately.

4. Prodott Aktarview

Familiarize yourself with the components and controls of your SKYTECH ST-194D Digital Radio.

Figura 1: Quddiem view of the SKYTECH ST-194D Digital Radio. The image displays the silver-colored radio with its telescopic antenna extended. On the front, a speaker grille is visible on the left, and a digital display with control buttons is on the right. Below the display are buttons for alarm and time settings, along with switches for DX/Local reception and AM/FM band selection. A black wrist strap is attached to the side.

Kontrolli u Karatteristiċi:

• Antenna teleskopika: Għal riċezzjoni mtejba tas-sinjal tar-radju.
• Grille tal-Ispeaker: Output awdjo.
• Wirja Diġitali: Shows time, frequency, and alarm status.
• AL SET Button: Użat biex tissettja l-ħin tal-allarm.
• Buttuna SIEGĦA: Adjusts the hour for time and alarm settings.
• Buttuna OFF: Powers off the radio.
• Buttuna SET TAL-ĦIN: Użat biex tissettja l-ħin kurrenti.
• Buttuna MIN: Adjusts the minute for time and alarm settings.
• AL ON/OFF Button: Jixgħel jew jitfi l-funzjoni tal-allarm.
• TUNE Button: Adjusts the radio frequency.
• DX.LOCAL Switch: Selects between distant (DX) and local signal reception.
• AM ON Switch: Activates the AM radio band.
• FM ON Switch: Activates the FM radio band.
• Ċinga tal-polz: Għal ġarr portabbli.

5. Setup

5.1 Installazzjoni tal-batterija

The SKYTECH ST-194D is battery-powered. To install batteries:

1. Locate the battery compartment cover on the back or side of the radio.
2. Żerżaq jew neħħi l-għatu biex tiftaħ il-kompartiment.
3. Insert the required batteries (e.g., AA or AAA, check compartment for type) according to the polarity indicators (+ and -).
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

Note: Ensure batteries are inserted correctly. Incorrect installation can damage the device.

6. Istruzzjonijiet Operattivi

6.1 Tixgħel/Jitfi

• To power on the radio, ensure batteries are installed and slide the AM ON or FM mixgħul is-swiċċ għall-pożizzjoni 'ON'.
• To power off the radio, press the OFF buttuna.

6.2 Tuning the Radio (FM Band)

The SKYTECH ST-194D supports FM radio reception.

1. Estendi l-antenna teleskopika għal riċeviment ottimali.
2. Żerżaq il- FM mixgħul is-swiċċ għall-pożizzjoni 'ON'.
3. Uża l- INTONA button to scan for and select your desired FM station. The frequency will be displayed on the digital screen.
4. Adjust the antenna position for the clearest signal.

6.3 Issettjar tal-Ħin

1. Agħfas u żomm il- IL-ĦIN IPPOST sakemm l-wiri tas-siegħa jibda jteptep.
2. Agħfas il- SIEGĦA buttuna biex taġġusta s-siegħa.
3. Agħfas il- IL-ĦIN IPPOST Agħfas il-buttuna mill-ġdid, u l-wiri tal-minuti jibda jteptep.
4. Agħfas il- MIN buttuna biex taġġusta l-minuta.
5. Agħfas IL-ĦIN IPPOST għal darb'oħra biex tikkonferma u toħroġ mill-modalità tal-issettjar tal-ħin.

6.4 Issettjar tal-Allarm

1. Agħfas u żomm il- AL SET sakemm l-wiri tas-siegħa tal-allarm jibda jteptep.
2. Agħfas il- SIEGĦA buttuna biex taġġusta s-siegħa tal-allarm.
3. Agħfas il- AL SET Agħfas il-buttuna mill-ġdid, u l-wiri tal-minuti tal-allarm jibda jteptep.
4. Agħfas il- MIN buttuna biex taġġusta l-minuta tal-allarm.
5. Agħfas AL SET once more to confirm and exit alarm setting mode.
6. Biex tattiva jew tiddiżattiva l-allarm, agħfas il-buttuna AL ON/OFF button. An alarm icon will typically appear on the display when the alarm is active.

6.5 DX.LOCAL Switch

Il- DX.LOCAL switch helps optimize reception:

• Issettja għal LOKALI for strong, nearby radio stations. This setting helps reduce interference from distant signals.
• Issettja għal DX (Distant) for weaker, far-away radio stations. This setting increases sensitivity to pick up fainter signals.

7. Manutenzjoni

7.1 Tindif

Wipe the radio with a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the surface or internal components.

7.2 Kura tal-Batterija

• Neħħi l-batteriji jekk ir-radju ma se jintużax għal perjodu estiż biex tevita t-tnixxija.
• Armi l-batteriji użati b'mod responsabbli skont ir-regolamenti lokali.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

This product is designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.