1. Introduzzjoni
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your PERLESMITH Corner TV Wall Mount Bracket, model PSCMF1. Please read this manual thoroughly before installation to ensure correct assembly and to prevent potential damage or injury. Keep this manual for future reference.
2. Informazzjoni Importanti dwar is-Sigurtà
TWISSIJA: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact PERLESMITH customer support or a qualified installer.
- Do not install this product on walls that are not structurally sound.
- Kun żgur li l-wiċċ tal-immuntar jista' jsostni b'mod sikur il-piż ikkombinat tal-immuntar u tat-televiżjoni.
- Always use a stud finder to locate wood studs accurately. Do not rely on visual estimation.
- Verify that the VESA mounting pattern of your TV is compatible with this mount (Max VESA 400x400mm).
- Teċċedix il-kapaċità massima tal-piż ta' 99 lbs (45 kg).
- Żomm il-partijiet żgħar kollha 'l bogħod mit-tfal.
- Uża biss il-ħardwer ipprovdut jew speċifikat minn PERLESMITH.
- Tighten all screws firmly but do not overtighten. Overtightening can damage screws and components.
- Dan il-prodott huwa maħsub għall-użu fuq ġewwa biss.
3. Kontenut tal-Pakkett
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact PERLESMITH customer support.

Immaġni: Fuqview of the PERLESMITH Corner TV Wall Mount Bracket and its components, including the main mount assembly, TV brackets, and a spirit level.
Komponenti tal-Immuntar:
- Wall Plate Assemblies (Left and Right)
- Armi Artikulanti
- Pjanċa tat-TV
- Brackets tat-TV (Xellug u Lemin)
Kitt tal-Ħardwer:

Image: Various screws, washers, and spacers provided for attaching the TV to the mount and for wall installation.
The hardware kit includes various screws (M4, M6, or M8), washers, and spacers to accommodate different TV models and wall types. A spirit level and cable ties are also typically included.
4. Għodod Meħtieġa (Mhux Inklużi)
- Lapes
- Tornavit tar-ras Phillips
- Drill Elettriku
- Finder Stud
- Level (a small one is usually included, but a longer one can be helpful)
- Tape Measure
- Ċavetta tas-sokit (għal boltijiet ta' lag)
- Hammer (for concrete anchors, if applicable)
5. Setup u Installazzjoni
5.1 Kontrolli ta' qabel l-installazzjoni
- Kompatibbiltà tat-TV: This mount supports TVs from 26 to 60 inches, weighing up to 99 lbs (45 kg).
- Kompatibbiltà VESA: Compatible VESA patterns include 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm. Measure the distance between the mounting holes on the back of your TV.
- Tip ta' Ħajt: This mount is designed for installation on wood studs, concrete, or brick walls. Tinstallax fuq drywall waħdu.

Image: Visual guide for TV compatibility, VESA patterns, and suitable wall types for installation.

Image: Illustration emphasizing the strong TV support and maximum weight capacity of 99 lbs.
5.2 Twaħħil tal-Brakketti tat-TV mat-TV
- Poġġi t-TV tiegħek b'attenzjoni wiċċu 'l isfel fuq wiċċ artab u nadif biex tevita li l-iskrin isir ħsara.
- Identify the correct diameter and length of screws (M4, M6, or M8) that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
- Attach the left and right TV brackets to the back of your TV using the selected screws. Ensure the brackets are centered and level.
5.3 Wall Plate Installation (Corner Mounting)
This mount is specifically designed for corner installations, allowing for flexible placement in both inside and outside corners, as well as offset walls.

Immaġni: Eżamples of how the mount adapts to various wall shapes, including inside corners, outside corners, and offset wall installations.
- Sib l-Istuds/Immarka t-Toqob:
- For wood stud installation: Use a stud finder to locate the center of the wood studs in the desired corner. Mark the drilling points for the wall plates. Ensure the stud spacing is appropriate for the mount (if your wood stud spacing exceeds 16 inches, refer to model PSXFK1).
- For concrete/brick installation: Mark the drilling points directly on the wall.
- Drill Pilota Toqob:
- For wood studs: Drill pilot holes using a 7/32 inch (5.5mm) drill bit to a depth of 2.75 inches (70mm).
- For concrete/brick: Drill pilot holes using a 3/8 inch (10mm) masonry drill bit to a depth of 2.95 inches (75mm). Insert concrete anchors into the holes, ensuring they are flush with the wall surface.
- Attach Wall Plates:
- Align the left and right wall plates with the drilled pilot holes.
- Secure the wall plates to the wall using the provided lag bolts and washers. Tighten firmly with a socket wrench, but do not overtighten.
- Use the included spirit level to ensure the wall plates are perfectly level before fully tightening.

Image: Step-by-step illustration of securing the wall plates to the chosen wall type, including drilling and fastening.
5.4 Iddendel it-TV
- With assistance, carefully lift the TV with the attached brackets and hook them onto the TV plate of the wall mount.
- Ensure the TV brackets are securely seated on the TV plate.
- Tighten the safety screws located at the bottom of the TV brackets to prevent accidental dislodgement.

Image: Illustration demonstrating the process of hanging the TV onto the wall mount and securing it with safety screws.
6. Istruzzjonijiet Operattivi (Aġġustamenti)
Your PERLESMITH Corner TV Wall Mount offers various adjustments for optimal viewing.

Image: Visual representation of the mount's flexibility, including tilt, extension, retraction, and swivel capabilities.
- Aġġustament tal-inklinazzjoni: The mount allows for a tilt range of +5° to -10°. Loosen the tilt knobs on the TV plate, adjust the TV to the desired angle, and then retighten the knobs to secure.
- Aġġustament tad-dawran: The articulating arms allow the TV to swivel up to 45° left or right (maximum swivel angle depends on TV size). Gently push or pull the TV to the desired viewangolu tal-ing.
- Estensjoni u Irtirar: The mount can extend up to 24 inches (61 cm) from the wall and retract to 2.2 inches (5.6 cm). Carefully pull the TV forward or push it back towards the wall.
- Livellar wara l-Installazzjoni: The TV plate can be adjusted +/-3° for fine-tuning the horizontal level after installation. Loosen the leveling screws, adjust the TV, and retighten.

Image: Illustration demonstrating the post-installation leveling feature, allowing for minor horizontal adjustments.
7. Manutenzjoni
- Periodically check that all screws and connections are secure. Retighten if necessary.
- Naddaf il-muntatura b'ċarruta ratba u niexfa. Evita prodotti tat-tindif jew solventi li joborxu.
- Ensure the articulating arms move smoothly. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-TV mhux livellat wara l-installazzjoni. | Wall plates not perfectly level, or post-installation leveling not adjusted. | Use the post-installation leveling feature (+/-3°) to fine-tune. Loosen leveling screws, adjust, then retighten. |
| Il-muntatura tħossha maħlula jew instabbli. | Screws not fully tightened, or incorrect wall type/anchors used. | Ensure all lag bolts and TV bracket screws are securely tightened. Verify installation on appropriate wall type (wood stud, concrete, brick). Do not install on drywall alone. |
| It-TV ma joqgħodx mal-muntatura. | Daqs tat-TV jew disinn VESA mhux korrett. | Confirm your TV's size (26-60 inches) and VESA pattern (max 400x400mm) are compatible with this mount. |
| Diffikultà biex taġġusta l-inklinazzjoni/dawrien. | Tilt knobs too tight, or pivot points need lubrication. | Loosen tilt knobs before adjusting. Apply a small amount of silicone-based lubricant to articulating joints if movement is stiff. |
If you encounter issues not listed here, please contact PERLESMITH customer support for assistance.
9. Speċifikazzjonijiet tal-Prodott
- Mudell: PSCMF1
- Ditta: PERLESMITH
- Materjal: Azzar ta' saħħa għolja
- Kulur: Iswed
- Kompatibbiltà tad-Daqs tat-TV: 26 - 60 pulzieri
- Kapaċità tal-piż: Sa 99 lbs (45 kg)
- Kompatibbiltà VESA: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- Angolu ta 'l-inklinazzjoni: +5° sa -10°
- Angolu tad-dawran: Up to 45° (left/right, TV size dependent)
- Aġġustament tal-Livell: +/-3°
- Estensjoni mill-Ħajt: 2.2 pulzieri (5.6 ċm) sa 24 pulzieri (61 ċm)
- Dimensjonijiet tal-Prodott: Madwar 32 x 13 x 3 pulzieri
- Piż tal-oġġett: Madwar 13.37 liri
10. Garanzija u Appoġġ għall-Klijent
PERLESMITH is committed to providing high-quality products and excellent customer service. This product is backed by a manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact PERLESMITH directly.
If you have any questions, require assistance with installation, or need to report a missing/defective part, please contact our US-based customer support team:
- Websit: www.perlesmith.com
- Email: support@perlesmith.com
- Telefon: 1-800-XXX-XXXX
Please have your model number (PSCMF1) and purchase information ready when contacting support.





