Introduzzjoni
This instruction manual provides essential information for the proper installation, operation, and maintenance of your American Plumber WDGD-5005 Dual-Gradient Polypropylene Filter Cartridge. Please read this manual thoroughly before installation and retain it for future reference. This filter is designed to reduce sediment, dirt, silt, rust, and scale particles from your water supply.
Karatteristiċi u Benefiċċji tal-Prodott
- Dual-Gradient Filtration: Functions as both a pre-filter and a post-filter within a single cartridge, offering efficient multi-stagfiltrazzjoni elettronika.
- Enhanced Dirt Holding Capacity: Engineered to hold three times the amount of dirt compared to similar wound cartridges, extending filter life.
- Klassifikazzjoni tal-Mikron: Features a 50-micron pre-filter for larger particles and a 5-micron post-filter for finer sediment removal.
- Tnaqqis tal-Kontaminanti: Effectively reduces extra-fine sand, dirt, silt, rust, and scale particles from your water.
- Materjali Ċċertifikati: The WDGD-5005 is tested and certified by NSF International under NSF/ANSI Standard 42 for material requirements only, ensuring product safety and quality.
- Kompatibilità: Designed to fit American Plumber W10-PR and W15-PR whole house filter housings.
Image: Packaging for the American Plumber WDGD-5005 filter cartridge, highlighting its dual-gradient polypropylene construction and sediment reduction capabilities. The packaging also indicates NSF certification for material requirements and compatibility with W10-PR and W15-PR housings.
Informazzjoni dwar is-Sigurtà
- Always turn off the main water supply before installing or replacing the filter cartridge.
- Ħalli l-pressjoni tal-ilma fis-sistema qabel ma tiftaħ il-kaxxa tal-filtru.
- Use appropriate tools for housing removal and tightening to prevent damage or leaks.
- Kun żgur li l-konnessjonijiet kollha huma sikuri biex tevita t-tnixxijiet.
- Tużax ma 'ilma li huwa mikrobijoloġikament mhux sikur jew ta' kwalità mhux magħrufa mingħajr diżinfezzjoni adegwata qabel jew wara s-sistema.
- This filter is designed for cold water applications only.
Setup u Installazzjoni
This filter cartridge is designed for use in compatible whole house filter housings, such as the American Plumber W10-PR and W15-PR models. Refer to your filter housing's manual for specific instructions on opening and closing the housing.
- Itfi l-Provvista tal-Ilma: Locate the main water shut-off valve for your home and turn it off.
- Ittaffi l-Pressjoni: Open a nearby faucet to relieve pressure in the water lines.
- Iftaħ il-Kisi tal-Filtru: Using the appropriate wrench, unscrew the filter housing sump from the cap.
- Neħħi l-Kartriġ il-Qadim: Carefully remove the old filter cartridge and discard it.
- Akkomodazzjoni Nadifa: Clean the inside of the filter housing sump with warm, soapy water. Rinse thoroughly.
- Inspect O-Ring: Inspect the housing O-ring for any cracks or damage. Replace if necessary. Lubricate the O-ring with a silicone lubricant if recommended by your housing manufacturer.
- Daħħal Skartoċċ Ġdid: Place the new American Plumber WDGD-5005 filter cartridge into the housing sump. Ensure it is seated properly.
- Erġa' arma l-Housing: Screw the housing sump back onto the cap, hand-tightening first, then using the wrench for a snug fit. Do not overtighten.
- Irrestawra l-Provvista tal-Ilma: Ixgħel bil-mod il-provvista tal-ilma prinċipali.
- Iċċekkja għal Tnixxijiet: Monitor the filter housing for any leaks. If leaks occur, turn off the water, relieve pressure, and re-tighten the housing.
- Sistema ta' Aħsel: Open a nearby cold water faucet and let the water run for several minutes to flush out any air or fine particles from the new filter.
Istruzzjonijiet Operattivi
Once properly installed, the American Plumber WDGD-5005 filter cartridge operates automatically as water flows through your whole house filtration system. It continuously filters sediment and other specified particles from your water supply.
- No special adjustments are required for normal operation.
- Monitor water pressure. A noticeable drop in water pressure may indicate that the filter cartridge is becoming clogged and requires replacement.
Manutenzjoni
Sostituzzjoni tal-Iskartoċċ tal-Filtru
The filter cartridge life varies depending on usage and water conditions, including the amount of sediment in your water. It is recommended to replace the filter cartridge when you observe a noticeable decrease in water flow or a decline in water quality.
- For optimal performance, replace the filter cartridge every 3 to 6 months, or sooner if water flow significantly diminishes.
- Follow the "Setup and Installation" steps (1-11) to replace the old cartridge with a new American Plumber WDGD-5005 filter.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Fluss ta 'Ilma Mnaqqas | Kartriġ tal-filtru mblukkat. | Ibdel l-iskartoċċ tal-filtru. |
| Water Leaks from Housing | Improperly seated O-ring, damaged O-ring, or loose housing. | Turn off water, relieve pressure, inspect and reseat/replace O-ring, tighten housing. |
| Sediment f'Ilma Ffiltrat | Improperly installed cartridge, damaged cartridge, or filter bypass. | Ensure cartridge is seated correctly. Check for damage. Verify no bypass is active. Replace cartridge if damaged. |
Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Numru tal-Mudell | WDGD-5005 |
| Brand | AP (American Plumber) |
| Materjal | Polipropilene (PP) |
| Dimensjonijiet tal-Prodott | 4"D x 4"W x 10"H |
| Klassifikazzjoni tal-Micron | 50-Micron (pre-filter) / 5-Micron (post-filter) |
| Benefiċċji tal-Prodott | Removes Impurities, Reduces Sediment, Removes Odor |
| Kompatibilità | Fits American Plumber W10-PR and W15-PR housings |
| Ċertifikazzjoni | NSF/ANSI Standard 42 for material requirements only |
| UPC | 726714834372 |
Garanzija u Appoġġ
For specific warranty information regarding your American Plumber WDGD-5005 filter cartridge, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. Warranty terms typically cover manufacturing defects.
For technical support, replacement parts, or further assistance, please contact American Plumber customer service or your authorized dealer. Contact information can usually be found on the product packaging or the manufacturer's official websit.