JET JMD-18 350018 Milling/Drilling Machine

Introduzzjoni

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

Figura 1: The JET JMD-18 350018 Milling/Drilling Machine, shown with its integrated floor stand. This versatile machine is designed for precision milling and drilling operations.

Informazzjoni dwar is-Sigurtà

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating this machine.

• Aqra u tifhem l-istruzzjonijiet kollha qabel tħaddem il-magna.
• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable clothing. Avoid loose clothing or jewelry.
• Kun żgur li ż-żona tax-xogħol tkun nadifa, imdawwal sew, u ħielsa minn imbarazz.
• Tħaddimx il-magna f'temperatura għoljaamp jew postijiet imxarrba.
• Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod miż-żona tal-operat.
• Securely fasten all workpieces before beginning any operation.
• Disconnect power before performing any maintenance, adjustments, or changing accessories.
• Uża biss aċċessorji u aċċessorji rakkomandati.
• Maintain the machine in good working condition. Inspect for damaged parts before each use.
• Qatt tħalli l-magna waħedha waqt li tkun qed taħdem.

Setup

Proper setup is crucial for the safe and effective operation of your milling/drilling machine.

1. Spakkjar u Spezzjoni: Carefully unpack all components. Inspect for any shipping damage. Report any damage immediately to your dealer.
2. Assemblea Stand: Assemble the CS-18 Floor Stand according to the separate stand assembly instructions provided. Ensure all fasteners are securely tightened. The stand includes an enclosed shelf for convenient storage.
3. Machine Mounting: Securely mount the JMD-18 milling/drilling machine head to the assembled floor stand. Ensure all mounting bolts are tightened to the specified torque.
4. Konnessjoni Elettrika: Connect the machine to a 230-Volt, 1-Phase power supply. Ensure the electrical circuit is properly grounded and protected by a suitable circuit breaker.
5. Worktable Preparation: Clean the 9-1/2-by-31-3/4-inch worktable surface. Apply a light coat of machine oil to prevent rust.
6. Belt Cover Adjustment: The hinged belt cover allows for faster speed changing. Familiarize yourself with its operation for future speed adjustments.
7. Invellar: Ensure the machine is level on a stable surface to prevent vibration and ensure accurate operation.

Istruzzjonijiet Operattivi

This section outlines the general procedures for operating your JET JMD-18 milling/drilling machine.

• Power On/Off: Locate the main power switch. Turn the machine ON only when ready to begin work and OFF immediately after completing a task or before making adjustments.
• Għażla tal-Veloċità: Adjust the spindle speed using the belt and pulley system accessible via the hinged belt cover. Select the appropriate speed for the material and tooling being used. Refer to a speed chart for guidance.
• Biċċa tax-xogħol Clamping: Dejjem sew clamp your workpiece to the worktable using appropriate vises or clamps. Loose workpieces can cause injury or damage.
• Installazzjoni tal-għodda: Install the correct cutting tool (drill bit, end mill, etc.) into the spindle chuck or collet. Ensure it is properly seated and tightened.
• Milling Operations: For milling, carefully position the workpiece relative to the cutting tool. Use the table's X, Y, and Z axis controls for precise material removal.
• Operazzjonijiet tat-Tħaffir: For drilling, align the drill bit with the desired hole location. Use the quill feed handle for controlled drilling depth.
• Coolant Application: For certain materials and operations, apply appropriate cutting fluid to prolong tool life and improve surface finish.
• Waqfien ta' Emerġenza: Iffamiljarizza ruħek mal-post u t-tħaddim tal-buttuna ta' waqfien ta' emerġenza.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your JET milling/drilling machine.

• Tindif ta 'Kuljum: After each use, clean the machine thoroughly, removing all chips, dust, and debris from the worktable, ways, and other surfaces.
• Lubrikazzjoni: Periodically lubricate all moving parts, including lead screws, gibs, and spindle bearings, according to the lubrication points indicated in the machine's diagrams (if available). Use recommended lubricants.
• Spezzjoni taċ-ċinturin: Regularly inspect the drive belts for wear, cracks, or tension. Replace worn belts and adjust tension as needed.
• Spezzjoni Elettrika: Periodically check electrical cords and connections for damage. Ensure all wiring is secure.
• Tooling Care: Keep all cutting tools sharp and clean. Dull tools can lead to poor performance and machine strain.
• Ħażna: When not in use, store the machine in a dry, clean environment. Apply a thin coat of rust preventative to exposed metal surfaces.

Issolvi l-problemi

Din it-taqsima tipprovdi soluzzjonijiet għal kwistjonijiet komuni li tista’ tiltaqa’ magħhom.

Speċifikazzjonijiet

Garanzija u Appoġġ

For information regarding product warranty, technical support, or to purchase replacement parts, please contact JET customer service or visit the official JET websit.

You can also find more information and products from JET by visiting their official store page: JET Official Store