Hurricane Pro 24-inch Heavy Duty Drum Fan Instruction Manual

1. Introduzzjoni

Thank you for choosing the Hurricane Pro 24-inch Heavy Duty Drum Fan. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new fan. Please read all instructions carefully before use and retain this manual for future reference.

This high-velocity drum fan is designed to deliver powerful airflow, making it ideal for large spaces such as garages, workshops, greenhouses, and other indoor environments requiring significant air circulation.

2. Istruzzjonijiet tas-Sigurtà

2.1 Sigurtà Ġenerali

• Dejjem aqla’ l-fann mill-plakka tal-elettriku qabel ma tnaddaf, tagħmel manutenzjoni, jew iċċaqlaq.
• Tħaddimx il-fann b'korda jew plagg bil-ħsara. Jekk il-korda tkun bil-ħsara, trid tiġi sostitwita mill-manifattur jew minn aġent tas-servizz kwalifikat.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod mill-fann waqt it-tħaddim.
• Do not insert fingers or any objects through the grill when the fan is operating.
• Kun żgur li l-fann jitqiegħed fuq wiċċ stabbli u livellat biex tevita li jinqaleb.
• Tużax dan il-fann f'imxarrab jew damp postijiet, bħal kmamar tal-banju jew żoni tal-ħasil tal-ħwejjeġ.
• Dan il-fann huwa maħsub għall-użu fuq ġewwa biss.

2.2 Sigurtà Elettrika

• Connect the fan to a properly grounded 120V AC, 60Hz power outlet.
• M'għandekx tagħbija żejda ħwienet tal-elettriku.
• Tħaddimx il-korda tad-dawl taħt twapet jew għattih b'twapet tat-twapet, runners, jew kisi simili. Irranġa l-korda 'l bogħod miż-żoni tat-traffiku fejn ma titfixkelx.
• This fan features a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

3. Kontenut tal-Pakkett

Your Hurricane Pro 24-inch Heavy Duty Drum Fan package should include the following components:

• 1 x Hurricane Pro 24-inch Drum Fan (main unit with pre-assembled fan head)
• 1 x U-shaped stand/legs (2 pieces)
• 2 x Wing nuts with washers
• 1 x Manwal ta 'Istruzzjoni

4. Assemblea

The Hurricane Pro 24-inch Drum Fan comes mostly pre-assembled, requiring minimal setup. The main fan unit, including the blades and grill, is already intact. You only need to attach the stand/legs.

1. Waħħal l-Istand: Locate the two U-shaped stand pieces. These pieces connect to the main fan unit on either side.
2. Secure with Wing Nuts: Align the holes on the stand pieces with the corresponding holes on the fan's frame. Insert the provided screws (which may be pre-attached to the fan frame) through the holes, ensuring the washers are in place. Securely tighten the wing nuts on both sides.
3. Connect Rear Stand Pieces: The two U-shaped stand pieces connect at the rear. They feature a snap-in mechanism. Push the pin on one piece and slide it into the other until it snaps securely into place.

Once the stand is securely attached, your fan is ready for operation.

5. Istruzzjonijiet Operattivi

5.1 Aġġustament tal-Mixgħul/Mitfi u l-Veloċità

The fan features a 3-speed rotary switch located at the rear of the fan head.

1. Qabbad mal-Enerġija: Plug the fan's power cord into a suitable 120V AC, 60Hz grounded electrical outlet.
2. Turn On/Adjust Speed: Rotate the power switch clockwise to select your desired speed setting:
   • L (Low Speed): For gentle air circulation.
   • M (Medium Speed): Għal fluss tal-arja moderat.
   • H (High Speed): For maximum air circulation (7195 CFM).
3. Itfi: Rotate the power switch counter-clockwise until it reaches the 'O' (Off) position.

5.2 Aġġustament tal-Mejjel

The fan head can be tilted to direct airflow precisely where needed. To adjust the tilt angle:

1. Loosen the wing nuts on both sides of the fan frame (if they are tightened).
2. Gently tilt the fan head to the desired upward or downward angle.
3. Tighten the wing nuts on both sides to secure the fan head in position.

6. Manutenzjoni

6.1 Tindif

Tindif regolari jgħin biex iżomm il-prestazzjoni tal-fann tiegħek u jtawwal il-ħajja tiegħu.

1. Spluggja: Dejjem aqla’ l-fann mill-plagg tal-elettriku qabel ma tnaddaf.
2. Barra Nadif: Uża artab, damp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or chemicals.
3. Clean Grills and Blades: The front and rear grills can be removed for thorough cleaning. Carefully unclip the fasteners around the grill to detach it. Wipe the fan blades with a soft, damp drapp. Kun żgur li l-partijiet kollha huma niexfa għalkollox qabel ma terġa’ tgħaqqad u tħaddem il-fann.

6.2 Ħażna

When not in use, store the fan in a cool, dry place, away from direct sunlight and moisture. You may cover it to protect it from dust.

7 Issolvi l-problemi

• Il-fann ma jaħdimx:
  • Kun żgur li l-korda tal-enerġija hija mdaħħla sew f'sokit elettriku li jaħdem.
  • Check if the power switch is in the 'L', 'M', or 'H' position.
  • Verify that the electrical outlet is functioning by plugging in another device.
• Fluss ta 'arja mnaqqas:
  • Check if the fan grills or blades are obstructed by dust or debris. Clean as per maintenance instructions.
  • Ensure the fan is set to a higher speed setting if more airflow is desired.
• Ħoss jew vibrazzjoni mhux tas-soltu:
  • Turn off and unplug the fan. Check for any loose parts or foreign objects caught in the blades or grill.
  • Kun żgur li l-fann jitqiegħed fuq wiċċ stabbli u livellat.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or customer support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.