Introduzzjoni
The Graco Tranzitions 3-in-1 Harness Booster Car Seat is designed to adapt as your child grows, offering three distinct modes of use. This lightweight car seat provides a secure and comfortable travel solution, transitioning seamlessly from a harnessed booster to a highback booster, and finally to a backless booster. It incorporates user-friendly features for easy installation and maintenance.
Image: The Graco Tranzitions 3-in-1 Harness Booster Car Seat, showcasing its versatile design.
Informazzjoni dwar is-Sigurtà
Your child's safety is paramount. The Graco Tranzitions car seat is ProtectPlus Engineered, a combination of the most rigorous crash tests to help protect your child in frontal, side, rear, and rollover crashes. Always ensure the car seat is correctly installed and your child is properly secured according to the instructions for their current mode of use.
Image: The Graco Tranzitions car seat highlighting its ProtectPlus Engineered safety features.
Modi tal-Prodott
This car seat is designed to grow with your child through three stages:
- Forward-Facing Harness Booster: For children weighing 22-65 lb and up to 49 inches tall.
- Highback Belt-Positioning Booster: For children weighing 40-100 lb and 43-57 inches tall. Your child should be at least 4 years old.
- Backless Belt-Positioning Booster: For children weighing 40-100 lb and 43-57 inches tall. Your child should be at least 4 years old.
Image: Visual representation of the three usage modes for the Graco Tranzitions car seat.
Karatteristiċi Ewlenin
- Simply Safe Adjust™ Harness System: Adjusts your harness and headrest to 8 height positions in one motion, eliminating the need for rethreading.
- Serħan tar-ras aġġustabbli: The headrest can be easily adjusted to multiple positions to accommodate your growing child.
- Dual Removable Cup Holders: Two integrated cup holders keep drinks and snacks within reach and are easy to clean.
- Disinn ħafif: Weighing approximately 14 lb, this car seat is easy to transfer between vehicles.
- Jinħasel bil-Magni: Seat pad, body insert, and harness covers are machine washable for easy cleaning.
Immaġni: Dettaljata view of the Graco Tranzitions car seat features.
Image: Demonstration of the Simply Safe Adjust Harness System.
Installazzjoni
The Graco Tranzitions car seat can be installed using your vehicle's LATCH system or the vehicle's seat belt. Always refer to your car seat manual and your vehicle's owner's manual for specific installation instructions and compatibility.
LATCH System Installation
Locate the LATCH anchors in your vehicle. Attach the car seat's LATCH connectors to the vehicle's lower anchors. Ensure a tight fit by pressing down firmly on the car seat while pulling the LATCH strap to remove any slack. The car seat should not move more than one inch side-to-side or front-to-back at the belt path.
Vehicle Seat Belt Installation
Route the vehicle's lap and shoulder belt through the designated belt path on the car seat. Buckle the seat belt and remove all slack by pressing down firmly on the car seat while pulling the shoulder belt. Ensure the car seat is securely installed and does not move more than one inch side-to-side or front-to-back at the belt path.
Image: The lightweight design facilitates easy transfer between vehicles.
Istruzzjonijiet Operattivi
Securing Your Child (Harness Mode)
- Poġġi lit-tifel/tifla tiegħek fis-seat tal-karozza b'dahru ċatt mal-dahar tas-sedil.
- Ġib iċ-ċineg taċ-ċinturin fuq l-ispallejn tat-tifel/tifla tiegħek u bejn saqajh.
- Connect the buckle tongues into the buckle.
- Waħħal il-klipp tas-sider fil-livell tal-koxxa.
- Tighten the harness straps until snug, ensuring you cannot pinch any slack at the child's shoulder.
Adjusting Headrest and Harness
To adjust the headrest and harness height simultaneously, squeeze the red adjustment handle at the top of the headrest and slide it up or down to the desired position. Ensure the harness straps are at or slightly above your child's shoulders for forward-facing use.
Kura u Manutenzjoni
- Seat Pad, Body Insert, and Harness Covers: These fabric components are machine washable. Refer to the care tag on the fabric for specific washing instructions (typically cold water, delicate cycle, and air dry).
- Buckle and LATCH Connectors: Naddaf bl adamp cloth. Do not use harsh cleaners or lubricants.
- Partijiet tal-plastik u tal-metall: Wipe clean with mild soap and cool water.
- Detenturi tat-tazza: The dual cup holders are removable for easy cleaning.
Issolvi l-problemi
- Is-Seat tal-Karozza Jħoss Maħlul Wara l-Installazzjoni: Re-read the installation instructions in both the car seat manual and your vehicle's owner's manual. Ensure all slack is removed from the LATCH strap or vehicle seat belt. The car seat should not move more than one inch at the belt path.
- Iċ-Ċineg tal-Arness huma Diffiċli biex jiġu Aġġustati: Check for any twists in the harness webbing. Ensure the harness adjuster strap is pulled straight out from the car seat.
- It-Tifel Jidher Skomdu: Verify that the headrest and harness are adjusted to the correct height for your child. Ensure no clothing or accessories are interfering with the harness fit.
Speċifikazzjonijiet
| Speċifikazzjoni | Valur |
|---|---|
| Numru tal-Mudell | 1947464 |
| Wisa' tal-Prodott | 19 pulzieri |
| Piż tal-Prodott | 20 lb |
| Car Seat Depth | 17.4 pulzieri |
| Car Seat Height | 26.5 pulzieri |
Image: Graco Tranzitions car seat with key dimensions.
Appoġġ
For further assistance, product registration, or to inquire about replacement parts, please visit the official Graco website or contact Graco customer service. Always register your car seat to receive important safety updates and recall notifications.
