Wisi Orbit Line OA10A Offset Satellite Antenna User Manual

1. Introduzzjoni

1.1 Merħba

Thank you for choosing the Wisi Orbit Line OA10A Offset Satellite Antenna. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your satellite antenna. Please read this manual thoroughly before beginning installation and retain it for future reference.

1.2 Istruzzjonijiet tas-Sigurtà

Osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti u ħsara lit-tagħmir:

• L-installazzjoni għandha titwettaq biss minn persunal ikkwalifikat.
• Always disconnect power to any associated equipment before installation or maintenance.
• Avoid contact with power lines during installation.
• Use appropriate safety gear, including gloves, safety glasses, and a harness when working at heights.
• Ensure the mounting structure is stable and capable of supporting the antenna's weight and wind load.
• Do not attempt to modify the antenna or its components.

2. Kontenut tal-Pakkett

2.1 X'inhu Inkluż

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

• 1x Wisi Orbit Line OA10A Offset Satellite Reflector (100 cm)
• 1x LNB Support Arm
• 1x LNB Holder (40 mm)
• 1x Mast Clamp Issettja
• 1x Mounting Hardware Kit (screws, nuts, washers)

Stampa 1: Quddiem view of the Wisi Orbit Line OA10A satellite antenna, showing the reflector dish and the LNB arm.

3. Setup u Installazzjoni

3.1 Għażla tas-Sit

Choose an installation location that provides a clear line of sight to the desired satellite(s). Avoid obstructions such as trees, buildings, or other structures. The mounting surface or mast must be robust enough to withstand wind loads and the weight of the antenna.

3.2 Istruzzjonijiet għall-Armar

Follow these steps to assemble the satellite antenna:

1. Attach the LNB support arm to the back of the reflector dish using the provided screws and nuts. Ensure it is securely fastened.
2. Slide the 40 mm LNB holder onto the end of the LNB support arm. Do not tighten completely yet, as adjustment may be needed.
3. Secure the mast clamp set to the antenna's mounting bracket.

Stampa 2: Wara view of the Wisi Orbit Line OA10A satellite antenna, illustrating the mounting bracket and mast clamp assemblaġġ.

3.3 Immuntar tal-Antenna

Mount the assembled antenna to a sturdy mast or wall bracket. Use the mast clamp set to firmly secure the antenna. Ensure the mast is plumb and the antenna is level before making final adjustments. Do not overtighten the clamps initially, as fine adjustments will be required for satellite alignment.

3.4 LNB Installation

Insert your LNB (Low Noise Block converter) into the 40 mm LNB holder. Ensure the LNB is correctly oriented according to your satellite provider's specifications, typically with the F-connector pointing downwards to prevent water ingress. Secure the LNB in place with the provided clamp or screw on the LNB holder.

4. Operating the Satellite Antenna

4.1 Alignment and Signal Acquisition

Accurate alignment is crucial for optimal signal reception. This process typically involves adjusting the antenna's azimuth (horizontal angle) and elevation (vertical angle), and the LNB skew (rotation). A satellite finder meter is highly recommended for this step.

1. Consult your satellite provider or online resources for the correct azimuth, elevation, and LNB skew settings for your specific location and desired satellite.
2. Connect the satellite finder meter between the LNB and your satellite receiver.
3. Slowly adjust the antenna's elevation and azimuth, making small movements until the satellite finder indicates a strong signal.
4. Fine-tune the LNB skew for maximum signal quality.
5. Once the optimal signal is achieved, carefully tighten all mounting bolts and LNB holder screws to prevent movement.

4.2 Connecting to Receiver

Connect the coaxial cable from the LNB to the 'Satellite In' port on your satellite receiver. Ensure all connections are secure and weatherproofed if exposed to the elements.

5. Manutenzjoni

5.1 Kura Ġenerali

The Wisi Orbit Line OA10A antenna is designed for durability. Regular maintenance will ensure long-term performance:

• Periodically inspect the antenna for any physical damage, loose bolts, or corrosion.
• Clean the reflector surface with a soft cloth and mild detergent if dirt or debris accumulates, as this can degrade signal quality. Rinse thoroughly with water.
• Check coaxial cable connections for signs of wear or water ingress. Replace damaged cables or connectors.

5.2 Konsiderazzjonijiet tat-Temp

In areas prone to heavy snow or ice, periodically clear the reflector surface to prevent signal loss and structural strain. During severe storms, consider temporarily lowering or securing the antenna if possible, though the design is robust for typical weather conditions.

6 Issolvi l-problemi

6.1 Kwistjonijiet Komuni u Soluzzjonijiet

7. Speċifikazzjonijiet

7.1 Data Teknika

• Mudell: OA10A (75675)
• Daqs tar-riflettur: 100 ċm
• LNB Holder Diameter: 40 mm
• Impedenza: 50 Ohms
• Kulur: Griż ċar
• Numru ta' kanali: 1 (referring to LNB input)
• ASIN: B07C2NDPK2
• EAN: 04010056756758

8. Garanzija u Appoġġ

8.1 Informazzjoni dwar Garanzija

Wisi products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

8.2 Appoġġ għall-Klijent

If you encounter issues not covered in this manual or require further assistance, please contact your Wisi dealer or the customer support channel provided by your point of purchase. When contacting support, please have your model number (OA10A or 75675) and purchase details ready.