Introduzzjoni
The Einhell Power-X-Twincharger 3 A is a rapid dual battery charger designed for use with all Einhell Power X-Change 18V lithium-ion batteries. This charger allows for the simultaneous charging of two batteries, ensuring faster operational readiness for your Power X-Change tools. Its intelligent charge management system optimizes charging cycles to extend battery life and provides continuous status updates through a 6-step charging indicator. The charger is universally compatible with all Power X-Change batteries and features integrated hanging eyelets for efficient wall mounting.
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell Power-X-Twincharger 3 A. Please read it thoroughly before first use and keep it for future reference.
Image: The Einhell Power-X-Twincharger 3 A, a dual battery charger with two charging slots and indicator lights.
Setup
- Spakkjar: Carefully remove the charger from its packaging. Ensure all components are present and undamaged.
- Pjazzament: Place the charger on a stable, flat, and non-flammable surface. Ensure adequate ventilation around the charger. Avoid placing it in direct sunlight or near heat sources.
- Konnessjoni tal-Enerġija: Connect the charger's power cable to a standard 240V AC power outlet. The charger is designed for electrical operation.
- Immuntar tal-ħajt (Mhux obbligatorju): The Power-X Twincharger 3 A features integrated hanging eyelets for efficient wall mounting. Use appropriate fasteners for your wall type to secure the charger.
Image: Illustration showing the integrated hanging eyelets for wall mounting the charger.
Istruzzjonijiet Operattivi
Iċċarġjar tal-Batteriji
- Daħħal il-batterija: Slide one or two Einhell Power X-Change 18V lithium-ion batteries into the charging slots. Ensure the battery is fully seated in the slot.
- Iċċarġjar Awtomatiku: The charger will automatically begin the charging process. The intelligent charge management system will monitor the battery condition.
- Monitoraġġ tal-Istatus tal-Ħlas: The charger features a 6-step charging indicator system. Refer to the indicator lights on the charger to monitor the current charge status of each battery.
- LED aħdar (solidu): Batterija kompletament iċċarġjata.
- LED aħdar (jteptep): Iċċarġjar tal-batterija.
- LED Aħmar (Solid): Battery too hot/cold or defective.
- LED aħmar (jteptep): Battery fault or charging error.
- Parallel Charging: The Power-X-Twincharger 3 A is designed for parallel charging, meaning both batteries inserted will charge simultaneously, reducing overall charging time.
- Neħħi l-batterija: Once the green LED indicates a full charge, carefully remove the battery from the charging slot.
Image: A battery being inserted into one of the charging slots of the Einhell Power-X-Twincharger 3 A.
Image: The Einhell Power-X-Twincharger 3 A with two batteries inserted and indicator lights showing the charging process.
Ħinijiet tal-Iċċarġjar
The charging time depends on the battery's capacity (Ah). The Power-X-Twincharger 3 A provides a 3A charging current. For example, a 3.0 Ah battery will charge in approximately 60 minutes, and a 5.2 Ah battery in about 100 minutes.
Image: A table illustrating approximate charging times for various Power X-Change battery capacities (1.5 Ah to 8.0 Ah) using different Einhell chargers, including the Power X-Twincharger 3 A.
Manutenzjoni
- Tindif: Disconnect the charger from the power supply before cleaning. Use a dry, soft cloth to wipe the exterior of the charger. Do not use abrasive cleaners or solvents.
- Ħażna: Store the charger in a dry, dust-free environment, away from extreme temperatures. When not in use for extended periods, disconnect it from the power outlet.
- Spezzjoni: Regularly inspect the power cable and the charger housing for any signs of damage. Do not operate a damaged charger.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-ċarġer mhux qed jixgħel. | No power supply; faulty power cable. | Check power outlet and cable connection. Try a different outlet. |
| Battery not charging (Red LED solid). | Batterija sħuna/kiesħa wisq; batterija difettuża. | Allow battery to reach room temperature. If problem persists, battery may be defective and require replacement. |
| Battery not charging (Red LED flashing). | Charging error; battery fault. | Remove and re-insert the battery. If error persists, the battery or charger may be faulty. Contact support. |
| Iċċarġjar bil-mod. | Battery capacity is high; environmental factors. | Refer to the charging time table. Ensure charger is in a well-ventilated area. |
Speċifikazzjonijiet
- Mudell: Power-X-Twincharger 3 A
- Ditta: Einhell
- Input Voltage: 240 Volts AC
- Ħruġ Voltage: 18 Volts
- Kurrent tal-Iċċarġjar: 3 A
- Tip ta 'batterija: Lithium-ion (Power X-Change series)
- Dimensjonijiet (L x W x H): 22.5 x 9 x 22.5 ċm
- Piż: 878 gramma
- Numru ta' Slots tal-Iċċarġjar: 2 (simultaneous charging)
- Karatteristiċi: 6-step charging indicator, intelligent charge management, wall-mountable.
Informazzjoni dwar Garanzija
The Einhell Power-X-Twincharger 3 A comes with a manufacturer's warranty of 2 snin.
Additionally, Einhell offers an extended garanzija ta 'sena on all Power X-Change batteries and Einhell devices upon online registration. To activate this extended service, products must be registered on the official Einhell websit fi żmien 30 jum mix-xiri.
Id-disponibbiltà tal-partijiet żejda hija garantita għal 1 sena.
Image: Logo indicating a 3-year warranty for Einhell Power X-Change batteries and devices upon online registration.
Appoġġ
For further assistance, technical support, or warranty claims, please contact Einhell customer service. Refer to the official Einhell websit għal dettalji ta' kuntatt u riżorsi addizzjonali.
Uffiċjali Websit: www.einhell.com
