1. Introduzzjoni
This manual provides essential information for the safe and efficient use of your AXIS P1448-LE Network Camera. Please read this manual thoroughly before installing and operating the product. Keep this manual for future reference.
The AXIS P1448-LE is an advanced 8-megapixel outdoor-ready network camera designed for surveillance applications, offering high-resolution video and robust performance in various environmental conditions.
2. Prodott Aktarview
The AXIS P1448-LE is a bullet-style network camera featuring an 8 MP sensor, optimized for outdoor use. Key features include:
- Riżoluzzjoni ta' 8 Megapixel: Jipprovdi foo video ċara u dettaljatatage.
- Outdoor-Ready Design: Klassifikazzjoni IP67 għall-protezzjoni kontra t-trab u l-ilma.
- OptimizedIR: Built-in IR illumination for surveillance in complete darkness.
- Qawwa fuq Ethernet (PoE): Simplifies installation by providing power and data over a single cable.
- Edge Storage: Supports microSD/microSDHC/microSDXC cards for local video storage.
Figure 2.1: The AXIS P1448-LE Network Camera, shown in its retail packaging. This image displays the camera's compact form factor and the branding on the box.
Figura 2.2: Naħa A view of the AXIS P1448-LE Network Camera, highlighting its bullet design and mounting bracket. This perspective illustrates the camera's robust construction suitable for outdoor environments.
3. Informazzjoni dwar is-Sigurtà
Dejjem segwi l-linji gwida tas-sigurtà li ġejjin biex tevita korrimenti jew ħsara lill-prodott:
- Installazzjoni: L-installazzjoni għandha titwettaq minn persunal kwalifikat skont il-kodiċijiet u r-regolamenti lokali kollha.
- Sors tal-Enerġija: Use only the specified power source (PoE). Do not use power adapters not approved by Axis Communications.
- Ambjent: Do not expose the camera to extreme temperatures outside its operating range (-40°C to 60°C) or corrosive environments.
- Tindif: Disconnect power before cleaning. Use a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Modifiki: Do not attempt to open or modify the camera. This will void the warranty and may cause damage.
4. Setup u Installazzjoni
4.1 Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- AXIS P1448-LE Camera Network
- Gwida għall-Installazzjoni
- Mudell tat-Trapan
- Kitt tal-Konnettur
- Għodda Resistorx T20
4.2 Immuntar tal-Kamera
The AXIS P1448-LE is designed for ceiling or wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 1 kg / 2.2 lbs).
- Agħżel Post: Choose a suitable outdoor location, considering viewing angle and network cable access.
- Drill toqob: Use the provided drill template to mark and drill mounting holes.
- Muntatura Sikura: Attach the camera's mounting bracket to the surface using appropriate screws.
- Qabbad Kejbils: Connect the Ethernet cable to the camera's PoE port. Ensure a secure, weather-sealed connection.
- Aġġusta Angolu: Loosen the adjustment screws to position the camera for the desired viewing angle, then tighten securely.
4.3 Konnessjoni tan-Netwerk
The camera connects to your network via an Ethernet cable, powered by Power over Ethernet (PoE).
- Connect the Ethernet cable from a PoE-enabled switch or injector to the camera's network port.
- The camera will automatically power on and attempt to obtain an IP address via DHCP.
- Use Axis IP Utility or Axis Device Manager to discover the camera on your network and assign a static IP address if required.
5. It-tħaddim tal-Kamera
5.1 Aċċess għall- Web Interface
To configure and manage the camera, access its web interface:
- Iftaħ a web brawżer (eż., Chrome, Firefox).
- Daħħal l-indirizz IP tal-kamera fil-bar tal-indirizzi u agħfas Enter.
- Log in using the default credentials (username: għerq, password: jgħaddi). It is highly recommended to change the default password immediately after the first login for security reasons.
5.2 Konfigurazzjoni Bażika
Mill- web interface, you can configure various settings:
- Stream tal-Vidjo: Aġġusta r-riżoluzzjoni, ir-rata tal-frejms, u s-settings tal-kompressjoni.
- Settings tal-Immaġni: Configure brightness, contrast, sharpness, and WDR (Wide Dynamic Range).
- Issettjar tan-Netwerk: Modify IP address, DNS, and port settings.
- Ġestjoni tal-Avvenimenti: Set up motion detection, tamper alarms, and define actions (e.g., send email, record to SD card).
- Utenti: Create and manage user accounts with different access levels.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-kamera tiegħek.
- Tindif tal-Lenti: Periodically clean the camera lens with a soft, lint-free cloth moistened with a mild cleaning solution. Avoid abrasive materials.
- Spezzjoni tad-Djar: Inspect the camera housing and mounting bracket for any signs of damage, corrosion, or loose connections.
- Aġġornamenti tal-Firmware: Regularly check the Axis Communications website for firmware updates. Updating firmware can improve performance, add features, and address security vulnerabilities.
- Integrità tal-Cable: Ensure all cables are securely connected and free from damage, especially in outdoor installations where exposure to elements is constant.
7 Issolvi l-problemi
Din it-taqsima tipprovdi soluzzjonijiet għal kwistjonijiet komuni li tista’ tiltaqa’ magħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-kamera mhux qed tixgħel. | No PoE power; faulty cable; faulty PoE injector/switch. | Verify PoE source is active. Check cable connections. Test with a known good PoE device. |
| Ma jistax jaċċessa web interface. | Incorrect IP address; network connectivity issue; firewall blocking. | Confirm camera's IP address. Check network cables. Temporarily disable firewall. Try pinging the camera's IP. |
| Kwalità fqira tal-immaġni. | Dirty lens; incorrect focus/settings; low light conditions. | Clean the lens. Adjust focus and image settings (brightness, contrast, WDR). Ensure adequate lighting or verify IR functionality. |
| Video freezing or dropping frames. | Network congestion; insufficient bandwidth; camera overload. | Reduce video resolution/frame rate. Check network bandwidth. Ensure network infrastructure can handle video traffic. |
Jekk il-problema tippersisti, irreferi għall-appoġġ ta' Axis Communications. websit jew ikkuntattja l-appoġġ tekniku.
8. Speċifikazzjonijiet
Key technical specifications for the AXIS P1448-LE Network Camera:
- Mudell: P1448-LE (01055-001)
- Sensor tal-Immaġni: 8 MP CMOS
- Effective Video Resolution: 8 MP
- Lenti: Zoom Ottiku 3.5x
- ViewIng Angolu: 109 Grad
- Illuminazzjoni minima: Night Color technology, Infrared (IR)
- Qawwa: Enerġija fuq Ethernet (PoE)
- Konsum tal-Enerġija: 7.1 watt
- Temperatura operattiva: -40°C sa 60°C (-40°F sa 140°F)
- Klassifikazzjoni tal-IP: IP67 (Reżistenti għat-trab u l-ilma)
- Materjal: Aluminju, Polikarbonat (PC)
- Dimensjonijiet (L x W x H): 12.6 x 5.51 x 5.91 pulzieri (madwar 32 x 14 x 15 ċm)
- Piż: 2.2 liri (madwar 1 kg)
- Ħażna: MicroSD/MicroSDHC/MicroSDXC slot
- Konnettività: Ethernet bil-fili
9. Garanzija u Appoġġ
Axis Communications products typically come with a limited hardware warranty. For specific warranty terms and conditions, please refer to the official Axis Communications webis-sit jew il-karta tal-garanzija inkluża mal-prodott tiegħek.
For technical support, firmware downloads, and additional documentation, visit the official Axis Communications support portal:
When contacting support, please have your product model (P1448-LE) and serial number ready.
