Prodott Overview
The Krack KB-10XP is a high-performance digital bass reconstruction processor designed to enhance the low-frequency output of your audio system. It delivers a maximum peak output of 13.5V, ensuring significant power for improved bass response. With a wide frequency response range of 10Hz to 20kHz and an accuracy of +/- 1 dB, it provides precise and balanced sound reproduction across the entire audio spectrum. The unit features LED indicators for visual feedback on its operation and boasts a compact size of 20.3 x 14 x 3 cm, making it easy to install in various vehicle or sound system setups.
Karatteristiċi Ewlenin
- Digital Bass Reconstruction: Advanced processing for enhanced low-frequency output.
- Vol ta' Output Għolitage: Provides a maximum peak output of 13.5V for powerful bass.
- Rispons ta' Frekwenza Wiesgħa: 10Hz to 20kHz with +/- 1 dB accuracy for balanced sound.
- Indikaturi LED: Visual feedback on operational status.
- Disinn kompatt: Dimensions of 20.3 x 14 x 3 cm for flexible installation.
- Sors tal-Enerġija bil-fili: Reliable power delivery for consistent performance.
Kontenut tal-Pakkett
Malli tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-oġġetti kollha li ġejjin huma inklużi:
- Krack KB-10XP Bass Restorer Unit
- Remote Level Control Knob
- Wiring Harness (Power/Ground/Remote)
- Manwal għall-Utent (dan id-dokument)
Image: The retail packaging for the Krack KB-10XP Bass Restorer, showing the unit and remote control on the box.
Setup u Installazzjoni
Prekawzjonijiet tas-Sigurtà
- Skonnettja t-terminal negattiv tal-batterija tal-vettura qabel tibda kwalunkwe wajers.
- Kun żgur li l-wajers kollha huma iżolati sew biex tevita short circuits.
- Mount the unit securely in a dry, well-ventilated area away from excessive heat or moisture.
- Use appropriate gauge wiring for power and ground connections.
Konnessjonijiet tal-Wiring
- Qawwa (B+): Connect the +12V terminal to a constant +12V power source from the vehicle's battery, fused appropriately (e.g., 1A fuse).
- Art (GND): Connect the GND terminal to a solid chassis ground point in the vehicle. Ensure a clean, paint-free metal surface for optimal connection.
- Remot (REM): Connect the REM terminal to the remote turn-on output of your head unit or amplifier. This will turn the KB-10XP on and off with your audio system.
- Input (RCA): Connect the RCA input jacks from your head unit's pre-amp output or a line output converter.
- Output (RCA): Connect the RCA output jacks to the input of your amplifier(i).
- Kontroll mill-bogħod tal-Livell: Connect the remote level control knob to the dedicated port on the KB-10XP unit using the provided cable. This allows for convenient bass level adjustment from the driver's seat.
Immaġni: Wara view of the Krack KB-10XP unit, highlighting the RCA input/output jacks and the power/ground/remote terminal block.
Immaġni: Minn fuq għal isfel view of the Krack KB-10XP Bass Restorer unit, showing the main controls and the included remote level control.
Istruzzjonijiet Operattivi
Power-Up Inizjali
Once all connections are secure, reconnect the vehicle's negative battery terminal. Turn on your head unit. The KB-10XP should power on automatically via the remote turn-on wire, indicated by its power LED.
Aġġustament tal-Kontrolli
- Bass Level (Remote Knob): Use the remote level control knob to adjust the overall bass enhancement level. Turn clockwise to increase bass, counter-clockwise to decrease.
- Kontroll tal-Knis: This knob allows you to select the center frequency of the bass enhancement. Adjust it to target the specific low frequencies you wish to boost.
- Wide Control: This knob controls the Q factor or bandwidth of the bass enhancement. A higher setting will affect a wider range of frequencies around the sweep point, while a lower setting will provide a more focused boost.
Image: Close-up of the remote level control knob for the Krack KB-10XP, used to adjust bass intensity.
Indikaturi LED
The KB-10XP features LED indicators that provide visual feedback on its operational status. Refer to the unit's faceplate for specific LED functions (e.g., Power, Clip, Bass Max).
Manutenzjoni
- Tindif: Uża drapp artab u niexef biex timsaħ l-unità. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Ambjent: Ensure the unit remains in a dry environment, free from excessive dust or extreme temperatures.
- Konnessjonijiet: Iċċekkja l-konnessjonijiet tal-wajers kollha perjodikament biex tiżgura li huma sikuri u ħielsa mill-korrużjoni.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Bla Enerġija / L-Unità Mhux Mixgħul |
|
|
| No Bass Enhancement |
|
|
| Ħoss Mgħawġ |
|
|
Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | KB-10XP |
| Manifattur | Krack |
| Vol massimu tal-ħruġtage | 13.5V (Peak) |
| Rispons ta' Frekwenza | 10Hz - 20kHz (+/- 1 dB) |
| Dimensjonijiet (L x W x H) | 20.3 x 14 x 3 ċm (8 x 5.5 x 1.2 pulzieri) |
| Piż | 890 g (1.96 lbs) |
| Sors tal-Enerġija | Wired Electrical |
| Ampitwal Tip | Stat solidu |
| Apparati Kompatibbli | Audio Systems (listed as Guitar in source, but more broadly applicable for a bass restorer) |
| Kulur | Abjad |
Informazzjoni dwar Garanzija
Krack products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship for a period specified by your retailer or regional distributor from the original date of purchase. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your authorized Krack dealer.
Appoġġ għall-Klijent
If you encounter any issues or have questions regarding your Krack KB-10XP Bass Restorer that are not covered in this manual, please contact your authorized Krack dealer or the customer support team. When contacting support, please have your product model number (KB-10XP) and purchase information ready.
For the most up-to-date support information, visit the official Krack webis-sit jew ikkonsulta d-distributur lokali tiegħek.
