Manwal tal-Istruzzjonijiet tal-Ispeaker Bluetooth Hang Up ta' JAM Audio (Mudell HX-P101)

Introduzzjoni

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your JAM Audio Hang Up Bluetooth Speaker, Model HX-P101. Designed for portability and durability, this speaker features an IP67 waterproof, dust-proof, and drop-proof rating, making it suitable for various environments.

Figure 1: JAM Audio Hang Up Bluetooth Speaker (Red)

The JAM Audio Hang Up speaker is a compact, red portable Bluetooth speaker with a blue strap. It features a durable design, making it ideal for outdoor and wet environments.

Setup

Iċċarġjar lill-Ispeaker

The Hang Up speaker features an integrated USB charging cable.

1. Locate the integrated USB cable on the speaker.
2. Connect the USB cable to a compatible USB power source (e.g., computer, USB wall adapter).
3. Id-dawl indikatur tal-iċċarġjar se jixgħel.
4. Allow approximately 2-3 hours for a full charge. A full charge provides up to 8 hours of playtime.

Figure 2: Speaker features including the integrated USB cable

This image highlights key features of the speaker, including the integrated USB cable for charging, the speakerphone function, and its IP67 water and dust-proof rating. The blue 'X' and 'O' symbols are visible on the side.

Tixgħel/Jitfi

• To power on, press and hold the power button (usually indicated by a circle with a vertical line).
• Biex titfi, agħfas u żomm il-buttuna tal-qawwa mill-ġdid.

Istruzzjonijiet Operattivi

Tqabbil tal-Bluetooth

1. Kun żgur li l-ispiker huwa ċċarġjat u mixgħul. Id-dawl indikatur tal-Bluetooth se jteptep, u jindika li jinsab fil-modalità ta' tqabbil.
2. Fuq l-apparat tiegħek (smartphone, tablet, eċċ.), attiva l-Bluetooth u fittex apparati disponibbli.
3. Select "Hang Up" from the list of available devices.
4. Once paired, the speaker will emit a confirmation sound, and the Bluetooth indicator light will stop flashing and remain solid.

Uża l-Ispeakerphone

• When a call comes in, the music will pause, and the speaker will ring.
• Press the play/pause button (often integrated with the power button or a separate phone icon) to answer the call.
• To end the call, press the play/pause button again.
• To make a call, dial from your phone, and the speaker will automatically function as a hands-free device.

Konnessjoni Aux-In

• For non-Bluetooth devices, connect a 3.5mm audio cable (not included) to the Aux-In port on the speaker and your device.
• The speaker will automatically switch to Aux-In mode.

Using the Stick Pad

The innovative stick pad on the back of the speaker allows it to adhere to flat, smooth surfaces.

• Ensure the surface is clean and dry for optimal adhesion.
• Press the speaker firmly against the desired surface (e.g., shower wall, mirror, kitchen tiles).
• To remove, gently peel the speaker off the surface. The stick pad is reusable; clean it with water if it loses adhesion.

Figure 3: Speaker mounted on a shower wall

This image shows the JAM Audio Hang Up speaker in red, attached to a tiled shower wall, demonstrating its intended use in wet environments thanks to its stick pad and waterproof design.

Manutenzjoni

• Tindif: The speaker is IP67 rated, meaning it is dirt-proof and submersible in water up to one meter for 30 minutes. To clean, wipe with a damp cloth. For the stick pad, rinse with water and let it air dry if it loses its stickiness.
• Ħażna: Aħżen l-ispiker f'post frisk u niexef meta ma jkunx qed jintuża.
• Kura tal-batterija: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly.

Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet:

• Speaker not powering on: Ensure the speaker is fully charged. Connect the integrated USB cable to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
• Ma tistax tqabbad permezz tal-Bluetooth:
  1. Ensure the speaker is in pairing mode (flashing Bluetooth indicator light).
  2. Itfi u ixgħel il-Bluetooth fuq l-apparat tiegħek.
  3. Mexxi l-ispiker eqreb lejn l-apparat tiegħek (fi żmien 30 pied).
  4. Forget "Hang Up" from your device's Bluetooth settings and attempt to pair again.
  5. Ibda mill-ġdid kemm il-kelliem kif ukoll it-tagħmir tiegħek.
• L-ebda ħoss jew ħoss distort:
  1. Iċċekkja l-livelli tal-volum kemm fuq l-ispiker kif ukoll fuq l-apparat konness tiegħek.
  2. Ensure the speaker is properly paired or connected via Aux-In.
  3. If using Aux-In, ensure the cable is fully inserted and not damaged.
  4. Ipprova daqq l-awdjo minn sors jew apparat differenti biex teskludi problemi bis-sors.
• Stick pad losing adhesion: Rinse the stick pad with clean water and let it air dry to restore stickiness. Ensure the surface you are attaching it to is clean and dry.

Speċifikazzjonijiet

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

The JAM Audio Hang Up Bluetooth Speaker comes with a Garanzija Limitata. For specific terms and conditions, please refer to the warranty card included with your product or visit the official JAM Audio websit.

Appoġġ għall-Klijent

For further assistance, technical support, or warranty claims, please contact JAM Audio customer service.

• Websit: Żur il- JAM Audio Store on Amazon għal informazzjoni dwar il-prodott u riżorsi ta' appoġġ.
• Kuntatt: Refer to your product packaging or the official JAM Audio website for direct contact information (phone, email).