NITECORE BR35 1800 Lm USB Rechargeable Dual Distance Beam Bike Light User Manual

Introduzzjoni

The NITECORE BR35 bike light features an innovative dual distance beam, similar to car headlights, designed to simultaneously illuminate both near and far distances, eliminating dark zones and enhancing safety. Equipped with two powerful Cree XM-L2 U2 LEDs, the BR35 delivers a maximum output of 1800 lumens with a throw distance of 182 yards, providing ample illumination for various environments. A user-friendly three-button interface allows for easy toggling between light modes (short range beam, long range beam, dual range beam) using the mode (M) switch, and adjusting brightness levels with the plus (+) and minus (-) switches. An easy-to-read OLED screen on top displays the current light mode, brightness level, and remaining runtime. A built-in 6800mAh Li-ion rechargeable battery offers up to seventeen hours of runtime. Recharging is convenient via the supplied Micro USB charging cable, compatible with any available USB power source.

Image: NITECORE BR35 1800 Lm USB Rechargeable Dual Distance Beam Bike Light.

Karatteristiċi tal-Prodott

• 1800 Lumen max output with 192 yard throw
• Dual distance beam for near and far illumination
• 4 brightness levels, 3 modes (City, Trail, and Road) and Caution Light
• Built-in 6800mAh Li-ion rechargeable battery
• Includes no-tools-needed quick release mount
• OLED screen for real-time data display (current mode, brightness, remaining runtime, battery power)
• Klassifikazzjoni IP67 li ma jgħaddix ilma minnha
• Durable Aluminum and Polycarbonate construction

Kontenut tal-Pakkett

• NITECORE BR35 Bike Light
• Swiċċ mill-bogħod
• Bike handlebar mount
• 2x thick mount pads
• Cable tal-iċċarġjar tal-USB
• Manwal ta' struzzjonijiet (dan id-dokument)
• Karta tal-garanzija

Setup

Mounting the BR35

The NITECORE BR35 utilizes a no-tools-needed quick-mount system for easy installation on bicycle handlebars. To attach the mount, loosen the mount bolt, position it on your handlebar, and tighten the bolt securely. Slide the BR35 light onto the mount until it clicks into place. To remove the light, press the release tab on the mount and slide the unit off.

Image: The quick-mount system for the NITECORE BR35.

Image: Attaching the NITECORE BR35 to a bicycle handlebar.

Connecting the Remote Switch

The BR35 includes a remote switch for convenient operation while riding. Connect the remote switch cable to the micro-USB port on the BR35. Secure the remote switch to your handlebar using the integrated strap. This allows you to control the light's main functions without removing your hands from the handlebars.

Video: Demonstrates the setup, operation, and charging of the NITECORE BR35, including remote switch connection.

Istruzzjonijiet Operattivi

Qawwa mixgħul/mitfi

To turn the BR35 on or off, press and hold the 'M' (Mode) button.

Mode Selection (City, Road, Trail)

While holding the 'M' button, the OLED display will cycle through 'CITY', 'ROAD', and 'TRAIL' modes. Release the button when the desired mode is displayed to select it.

• Modalità Belt: The lower beam is constantly on. Brightness can be adjusted using the '+' and '-' buttons. Tapping the 'M' button provides a 3-second burst of Turbo (upper beam) as needed. This mode is suitable for urban night riding where oncoming traffic is a concern and bright outputs may be unnecessary due to streetlights.
• Road Mode: Offers the option of using either the long-range upper beam or the short-range lower beam. Tap the 'M' button to switch between these beams. Brightness is adjustable with the '+' and '-' buttons. This mode is ideal for areas with limited oncoming traffic or longer stretches requiring a bright, long-range output.
• Modalità Trail: Both beams are active, providing up to 1800 lumens of output and complete coverage both up close and at a distance. Brightness is adjustable with the '+' and '-' buttons. Tapping the 'M' button will toggle the top beam on and off, allowing full control over output and helping to avoid blinding oncoming traffic. This mode is most useful when exploring off-road or in any setting where conditions frequently change.

Caution Light Mode

For situations where visibility to others is paramount, the BR35 features a Caution Light mode. With the light off, press and hold the '+' and '-' buttons simultaneously to enter this mode. The lower beam will flash (if the light was last set to City or Road mode), or both beams will flash (if the light was last set to Trail mode). To exit Caution Light mode, press and hold the 'M' button.

Aġġustament tal-luminożità

In any active mode, use the '+' button to increase brightness and the '-' button to decrease brightness. The OLED screen will display the current brightness level.

Display OLED

The brightly lit and easy-to-read OLED display is located on the top of the BR35. This panel provides crucial operating information, including the current mode, brightness level, and remaining runtime, allowing riders to focus on their ride rather than the headlight.

Image: The OLED screen displaying real-time data on the NITECORE BR35.

Istruzzjonijiet għall-Iċċarġjar

The BR35 features a built-in 6800mAh Li-ion battery that is rechargeable via a convenient micro-USB charging port. Using the included USB charging cable, plug the BR35 into a compatible adapter, laptop, or power bank to charge. The intelligent charging circuit will automatically terminate charging upon completion. To quickly check the remaining battery power without turning on the BR35, simply tap the 'M' button, and the OLED display will show the remaining battery power.

The micro-USB charging port is located on the side of the device, protected by a rubber cover to maintain its waterproof rating.

Manutenzjoni

• Żomm id-dawl nadif billi timsaħ b'artab, damp drapp.
• Evita li tesponi d-dawl għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.
• Aħżen id-dawl f'post frisk u niexef meta ma tkunx qed tuża.
• Charge the battery regularly, even if not in frequent use, to maintain optimal battery health and prolong its lifespan.

Issolvi l-problemi

• Id-dawl ma jixgħelx: Ensure the battery is fully charged. Press and hold the 'M' button for the specified duration.
• Dawl jitteptep jew baxx: This indicates a low battery. Recharge the battery immediately.
• Buttuni ma jirrispondux: Try performing a full recharge of the device. If the issue persists, contact customer support.
• Muntatura mhux sigura: Ensure the mount bolt is tightened correctly on the handlebar. Check the mount and the light's attachment point for any damage.

Speċifikazzjonijiet

Garanzija u Appoġġ

The NITECORE BR35 includes a warranty card in the package. For detailed warranty information, product support, or to explore other Nitecore products, please visit the official Nitecore Store or contact their customer service directly.

Official Nitecore Store: Ħanut Nitecore fuq Amazon