Prodott Overview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Karatteristiċi Ewlenin
- 200 Lumen COB LED: Provides bright and wide illumination.
- Bla fili u li jinġarru: Battery-operated for flexible placement and easy transport.
- Għażliet multipli ta 'Immuntar: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Operazzjoni Sempliċi tal-Iswiċċ: Easy to turn on and off.
- Disinn Durabbli: Suitable for various indoor environments.
Informazzjoni dwar is-Sigurtà
- Tesponix l-apparat għal temperaturi estremi jew dawl tax-xemx dirett.
- Tgħaddix l-apparat fl-ilma jew likwidi oħra.
- Uża biss it-tip ta' batterija speċifikat u kun żgur li l-polarità hija korretta waqt l-installazzjoni.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Tippruvax tiżżarma jew timmodifika l-apparat. Dan jannulla l-garanzija.
- Neħħi l-batteriji jekk l-apparat ma jkunx se jintuża għal perjodu estiż biex tevita t-tnixxija.
Kontenut tal-Pakkett
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Manwal għall-Utent (dan id-dokument)
- Note: Batteries are typically not included and must be purchased separately.
Setup
Installazzjoni tal-batterija
- Locate the battery compartment cover on the back of the light.
- Żerżaq jew neħħi l-għatu biex tiftaħ il-kompartiment.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Għażliet ta 'Immuntar
The ANKO LED Night Light offers two primary mounting methods:
Immuntar manjetiku
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Ensure the surface is clean and dry for optimal magnetic adhesion.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Istruzzjonijiet Operattivi
Tixgħel/Jitfi
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Biex tixgħel id-dawl ON, żżerżaq is-swiċċ għall-pożizzjoni "ON".
- Biex tixgħel id-dawl OFF, żżerżaq is-swiċċ għall-pożizzjoni "MITFI".
Xenarji ta' Użu
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Kitchen Cabinets: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Dawl ta' Emerġenza: Keep readily available for power outages.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Manutenzjoni
Tindif
- Imsaħ il-parti ta’ barra tad-dawl b’ċarruta ratba u niexfa.
- Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-wiċċ.
- Ensure the light is off and batteries are removed before cleaning.
Sostituzzjoni tal-batterija
When the light dims or stops functioning, it is time to replace the batteries.
- Itfi d-dawl.
- Open the battery compartment as described in the "Battery Installation" section.
- Neħħi l-batteriji l-qodma u armihom skont ir-regolamenti lokali.
- Daħħal batteriji AAA ġodda, waqt li tiżgura l-polarità korretta.
- Agħlaq il-kompartiment tal-batterija sew.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Il-batteriji huma mejta jew installati ħażin. | Ibdel il-batteriji b'oħrajn ġodda, filwaqt li tiżgura polarità korretta. |
| Id-dawl huwa dgħajjef. | Il-batteriji huma baxxi. | Ibdel il-batteriji. |
| Light falls off mounting surface. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Kwistjoni ta' mekkaniżmu intern. | Ikkuntattja l-appoġġ għall-klijenti. Tippruvax issewwi. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | B079MDCYM7 |
| Sors tad-Dawl | COB LED |
| Output Lumen | 200 Lumens |
| Sors tal-Enerġija | Battery (e.g., 3x AAA, not included) |
| Għażliet ta 'Immuntar | Magnetic, Adhesive Sticker |
| Dimensjonijiet | (Specific dimensions not provided in input, placeholder) |
| Piż | (Specific weight not provided in input, placeholder) |
Garanzija u Appoġġ
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- Email: support@anko.com (Eżample email, actual contact info may vary)
- Telefon: 1-800-XXX-XXXX (Eżample phone, actual contact info may vary)
- Websit: www.anko.com (Eżample website, actual contact info may vary)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Noti Importanti dwar il-Midja
Stampi tal-Prodott: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Vidjows tal-Prodott: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.
